The Development of Superspectral Approaches for the Improvement of Land Cover Classification.

This paper develops a critical review of the hyperspectral splitting of the solar reflected radiation acquired by hyperspectral imaging sensors. The bandwidth used in the range from 2.0-2.5 μm by many hyperspectral sensors sometimes is too narrow for land cover classification. In fact, hyperspectral imagers often suffer from low signal-to-noise (SNR) in the short-wave infrared region of the electromagnetic spectrum, resulting in noisy image collection. This paper presents a new methodological approach to the splitting of the solar reflected radiation, called the "superspectral approach." It is based on the principle of increasing the channel bandwidth by increasing the number of wavelengths, to build synthetic spectral bands with higher SNRI The method- ology has been applied to the Multispectral Infrared and Visible Imaging Spectrometer (MIVIS) sensor, an airborne hyperspectral scanner used for environmental remote sensing applications in Italy. Interesting results have been achieved in crop classification, processing the Cordenons survey carried out in August 2001 in the northeastern part of Italy. The Spectral Angle Mapper algorithm was used for classification because it is insensitive to shadows. For accuracy assessment, the overall accuracy (OA) and kappa coefficient (k) were calculated and used in the comparison. Using the superspectral approach, an increment in the overall accuracy of about 42% and an increment in the kappa coefficient of about 51 % were obtained in comparison to the classification accuracy of unprocessed original MINIS data (OA = 41.21, k = 0.35). A second case study is presented using the National Aeronautics and Space Administration's experimental hyperspectral imager HYPERION. Data acquired over the lake of Garda (Italy) in October 2002 was processed with the superspectral approach. Comparing the simulated HYPERION superspectral bands with the original data, SNR improvements are achieved in the shortwave infrared region (from 0.7-54.2 for 2.012-μm wavelength and from 0.7-64.5 for the 2.365-μm wavelength). The methodology proposed is sensor independent and can be applied to any of the hyperspectral sensors currently available. [ABSTRACT FROM AUTHOR]