Optimal design of trapezoid stiffeners of composite cylindrical shells subjected to hydrostatic pressure.

Optimization of a composite cylindrical pressure hull subjected to hydrostatic pressure with trapezoidal stiffeners is considered in this paper. The composite cylindrical shell is fabricated with carbon fiber reinforced epoxy composite while the stiffener is made of aluminum alloy. First of all, the analytical buckling model for composite cylinders with stiffeners subjected to hydrostatic pressure is derived. Subsequently, the finite element method is used to verify the accuracy of the analytical solution through some examples. After verification, the analytical solution is coupled with the genetic algorithm and then used to optimize the cross-sectional shape of the stiffeners of the composite pressure hull to obtain the maximum buckling pressure. During the optimization process, the relationship between the buckling pressure and each geometrical parameter of the stiffener has been analyzed. The inertia moment of the stiffener section is found to have a good linear relationship with the buckling pressure. Therefore, the inertia moment is used as an objective function to optimize the cross-sectional shape of the stiffeners of the composite pressure hull, and the feasibility of this method has been proved by comparing the optimization results. With high efficiency, this method can be applied to the optimal design of the stiffener shape of a composite pressure shell. • Buckling of composite cylindrical shells with trapezoidal stiffeners. • The optimal cross-sectional shape of stiffeners has been obtained. • The inertia moment of stiffeners has a linear relationship with buckling pressure. • Using the inertia moment as the objective function can obtain expected results. [ABSTRACT FROM AUTHOR]