Controlled synthesis of electrospun hollow Pt-loaded SnO2 microbelts for acetone sensing.

Electrospinning–etching strategy was employed to synthesize Pt-loaded SnO 2 hollow microbelts (Pt_SnO 2 HBLs) based chemiresistive-type sensor demonstrating high sensitivity and selectivity toward acetone gas. This strategy overcomes a major hurdle toward achieving ubiquitous gas diffusion in electrospun structures, and provides highly porous thin-walled HBLs with large surface area and small crystallites. [Display omitted] • In situ templating of SnO 2 with SiO 2 was employed to form Pt-loaded SiO 2 @SnO 2 core–shell microbelts. • Etching away of SiO 2 in the Pt-loaded SiO 2 @SnO 2 microbelts yielded Pt-loaded SnO 2 hollow microbelts. • The Pt-loaded SnO 2 hollow microbelts exhibited good response (R a /R g = 93.5) and selectivity toward 2 ppm acetone at 350 °C. Challenges for ubiquitous diffusion of gas analytes into semiconducting metal oxides (SMOs) based sensing layers have necessitated the introduction of unprecedented synthesis techniques for thin, porous and high-performance gas sensing materials. In this work, electrospinning and calcination were employed to prepare unprecedented SiO 2 –SnO 2 core–shell microbelts (hereinafter referred to as SiO 2 @SnO 2 BLs) followed by etching away of SiO 2 in NaOH solution (pH 12) to achieve hollow SnO 2 BLs (hereinafter referred to as SnO 2 HBLs) with mean crystal size of 14.01 nm, large BET surface area (143.5 m2‧g–1), high porosity (mean pore size of 5.7 nm), and shell thickness of 58.3 ± 11.4 nm. Sensitization of SnO 2 HBLs with apoferritin-templated platinum nanoparticles (Pt NPs) enhanced their detection capability toward acetone. Response (defined as R a /R g , where R a and R g are sensor resistances in air and target gas, respectively) of Pt(0.12 %)_SnO 2 HBLs toward 2 ppm acetone was up to 7.8 times higher compared to that of pristine SnO 2 HBLs, and exhibited faster response (9.2 s). The Pt(0.12 %)_SnO 2 HBLs based sensor indicated a promising long-term stability, and outstanding repeatability of response (R a /R g = 93.7 ± 0.89) toward 25 cycles of 2 ppm acetone exposure in a humid environment of 90 % relative humidity. This performance could be attributed to the unique morphology of HBLs, sensitization effects of catalytic Pt NPs, and enlargement of the electron-depleted layer resulting from a Schottky barrier between Pt NPs and SnO 2 grains. [ABSTRACT FROM AUTHOR]