Design of n-Way Wideband Filtering Power Dividers With Good Port–Port Isolation.

In this article, a novel $n$ -way topology is proposed to design a class of multiway wideband filtering power dividers (FPDs). It consists of $n$ -coupled multimode resonators and $n$ resistors. To achieve a wideband filtering response, the stub-loaded multimode resonator is first employed. A good port–port isolation can then be obtained by electrically connecting the original open end of the two half-wavelength stubs of the two adjacent multimode resonators, and amounting a shunt resistor in-between the two adjacent stubs, which is allocated a quarter-wavelength away from the electrical connection point. The frequency responses of power division and isolation are analyzed based on even–odd mode, aiming to carry out theoretical analysis for wideband $n$ -way power dividers. To verify the proposed design method, a prototype three-way wideband FPD and a four-way wideband FPD are designed and fabricated. The simulated and measured results show a good agreement from each other, thus verifying the feasibility of this proposal. [ABSTRACT FROM AUTHOR]