High-shear granulation: An investigation into granule breakage rates.

[Display omitted] • A model has been proposed for the prediction of breakage in a high-shear mixer. • The capillary number and the pore saturation appear to be the key parameters. • Data fitted to the model is well-predicted. • The model does currently not extend to different powder-binder systems. Granule breakage is an important rate process in wet granulation that promotes product uniformity and controls product size and strength. In this work, a model to predict granule breakage is proposed and experimentally validated. The model assumes exponential of the surviving granules, dependent on a probability of breakage; a function of powder and binder properties, as well as operating parameters. Validation experiments were performed with a breakage-only granulator, filled with cohesive, non-granulating sand. Premade pellets made from lactose monohydrate and silicone oils were granulated at several impeller speeds, and the number of survivors was observed over time. The results revealed that the number of granules did indeed decay exponentially. It was found that the overall probability of breakage was inversely proportional to the capillary number. Moreover, the pore saturation played an important role in determining the probability of breakage, with higher pore saturations reducing breakage overall. A comparison with experimental data from literature revealed that the developed models agrees qualitatively with the experimental data, but is unable to fully capture the effect of powder properties and powder-binder interaction. [ABSTRACT FROM AUTHOR]