A new approach for a fully automated earthquake monitoring: the local seismic network of the Trentino region (NE Italy).

An application of the Complete Automatic Seismic Processor (CASP) for seismic monitoring is presented. Its integrated and iterative fully automatic procedure is able to achieve complete data analysis and significantly rapid elaborations. Its performance in real-time seismic monitoring and alerting is tested in the Trentino region (NE Italy) for the period 1st March 2018 – 31st August 2019. CASP precisely and accurately located 386 seismic events, with local magnitudes in the -0.8–3.4 range, and produced a seismic catalogue with a magnitude of completeness around 1.1. Automatic earthquake solutions, with average horizontal and vertical errors of 1.1 and 1.5 km, are very similar to those included in a manually revised reference catalogue. In addition, 146 detected events are located in the area of the local porphyry quarries. CASP alerts are delivered as Short Message Service (SMS), Telegram and e-mail messages within an average time of just over two minutes from the earthquake origin time. These alerts contain earthquake source parameters, ground shaking levels and instrumental intensities. CASP reliability, promptness and robustness permit to civil protection and decision makers to perform a monitoring primarily dedicated to emergency management, in order to evaluate both seismic sources and their effects (peak ground acceleration) at local targets, such as more inhabited territories and critical infrastructures (dams and hydropower plants). [ABSTRACT FROM AUTHOR]