Back to Search Start Over

Shear strength of 50 MPa longitudinally reinforced concrete beams made with coarse aggregates from low strength recycled waste concrete.

Authors :
Rahal, Khaldoun N.
Elsayed, Khalad
Source :
Construction & Building Materials. Jun2021, Vol. 286, pN.PAG-N.PAG. 1p.
Publication Year :
2021

Abstract

• Shear strength of 50 MPa concrete beams without stirrups is investigated. • Recycled concrete aggregates replaced natural coarse aggregates at rates from 10% to 100%. • Recycled aggregates did not affect failure mode and shear crack patterns. • Normalized shear strengths of RAC beams were higher than those of control NAC beams. • Shear calculations of ACI, CSA, EC2, MC2010 and MCFT are conservative for RAC beams. Crushed waste concrete is a viable source of recycled coarse aggregates (RCA) to produce concrete. The RCA generally has less favorable properties relative to natural coarse aggregates (NCA), which can affect the shear strength of the concrete. This paper reports the results of an experimental study of the shear behavior of seven shallow longitudinally reinforced beams containing seven ercentages of replacement (PR) of NCA with RCA ranging from 0 to 100%. The target cylinder compressive strength (f cyl ) of the concrete was 50 MPa and the longitudinal reinforcement ratio (ρ L) was about 1%. The results indicate that all the beams failed in shear. The use of RCA did not change their mode of failure and did not directly affect the characteristics of the critical diagonal failure cracks. In addition, it was found that, on average, the recycled aggregate concrete (RAC) beams had a normalized shear strength that was 12% higher than that of the natural aggregates concrete (NAC) control beam. The difference in strength amongst the RAC beams with various PR was also limited. It is to be noted that the literature reports numerous cases where the RAC beams resisted higher strengths than their NAC control beams. Finally, the observed ultimate strengths of the beams were compared to the shear strength calculations of the ACI, CSA, EC2, and MC2010 codes and the Modified Compression Field Theory (MCFT). The calculated strengths were found to be conservative for the RAC beams. [ABSTRACT FROM AUTHOR]

Details

Language :
English
ISSN :
09500618
Volume :
286
Database :
Academic Search Index
Journal :
Construction & Building Materials
Publication Type :
Academic Journal
Accession number :
149920417
Full Text :
https://doi.org/10.1016/j.conbuildmat.2021.122835