Assessment of different ductile damage models of AA5754 for cold forming.

Aluminum alloys are characterized by low formability limits under cold forming conditions. The accurate prediction of deformation and failure in sheet metal forming allows for the optimization of forming process parameters and reduces tooling modifications and materials costs. Several models for ductile damage have been developed in the past decades to quantify and predict forming and damage response of sheet metal under complex-forming conditions. However, there is a need to identify a robust model which can provide realistic predictions for the behavior of aluminum sheet metal under the cold forming condition and different loading conditions. This work aims to investigate the prediction capabilities of different damage models for AA-5754 during the cold forming process. The experimental tensile and forming limit diagram (FLD) data of AA-5754 sheet metal used for the damage models' calibration were obtained from literature. In this article, four damage models available in two broadly used the FE software; namely, LS-DYNA and PAM-STAMP were investigated. The models utilized from LS-DYNA material library were MAT_JOHNSON_COOK, MAT_GURSON, and MAT_GISSMO; while from the PAM-STAMP software, the novel CDM model was used. The cross-die formability tests for AA-5754 sheets were performed to validate these damage models. The predictions of the novel CDM model were found to give a good agreement with the experimental results obtained from the formability tests. [ABSTRACT FROM AUTHOR]