Experimental and numerical study of combustion and emissions performance in a hydrogen-enriched Wankel engine at stoichiometric and lean operations.

• Experimental and numerical study of stoichiometric and lean combustion is conducted. • High-temperature combustion and its duration have crucial effects on burning rates. • The combustion initiation and combustion duration are shortened by H2 enrichment. • H2 addition with lean operation shows higher thermal efficiency and lower emissions. • There is a close correlation between early flame growth and combustion stability. Based on a retrofitted Wankel engine, fundamental experiments and numerical simulations were conducted to investigate the role of the hydrogen addition under stoichiometric and lean combustion conditions. The test-bench recording of in-cylinder pressure, heat release, cycle-to-cycle fluctuation, and exhaust emissions were used to characterize fuel combustion. The verified CFD model clarified the inherent mechanisms behind experimental data. Results showed that the introduction of hydrogen addition caused combustion temperature to increase, the timing taken for active radical formations was significantly advanced, and the peak concentrations increased. This contributed to the increased pressure and the shortened combustion phasing in experiments. There was a proportional correspondence of the early flame growth and cyclic variation. Hydrogen addition has a minimal effect on the turbulent intensity after spark timing. However, adopting a highly diluted mixture caused the enhanced turbulent intensity, which was responsible for improving the stability of the engine. Due to the synergistic effects of the work delivery, cyclic fluctuation, and exhaust temperature, a larger hydrogen addition with stoichiometric operation showed lower higher brake thermal efficiency. Nitrogen oxide emissions increased with hydrogen enrichment and reduced with a higher degree of mixture dilution owing to a close positive correlation between the mass elevated-temperature and NO x formation. Benefits from sufficient oxygen concentration and elevated combustion temperature, the chain transfer process can be accelerated. This explained why CO emissions decreased at a larger hydrogen-enriched and leaner condition in the experimental investigation. Increasing the hydrogen content provided improvement in the desired HC emissions for all operating points. [ABSTRACT FROM AUTHOR]