Identification between internal and external faults of UHVDC transmission lines based on sequential overlapping derivative transform of voltage transient.

The high‐resistance faults at the far end are the most important factor that causes protection failure of HVDC transmission lines. In the initial stage of the transmission lines fault, the transient information of power grid is abundant, and the sequential overlapping derivative (SOD) transform can emphasise the characteristics of the high‐frequency transient signal and its sudden change direction, amplify fault characteristics, and eliminate noise as far as possible, which is of great benefit to identify the high‐resistance faults at the far end. A fault identification method based on the SOD transform of voltage transient is proposed. In this method, the initial fault voltage travelling wave is processed by the SOD transform, and the initial fault voltage is a travelling wave is quickly detected. The set value of SOD transform is obtained according to the traversal simulation fault location, thus the identification criteria of internal and external faults are obtained. The simulation results show that the method can accurately identify the high‐resistance faults at the far end, and it is hardly affected by transition resistance and fault distance. [ABSTRACT FROM AUTHOR]