Influence of nitrogen gas injection and agglomeration during spray drying on the physical and bulk handling properties of milk protein concentrate powders.

This study investigated the influence of injecting nitrogen (N 2) gas under high pressure into milk protein concentrate (80%, w/w, protein; MPC) prior to spray drying and examining the physical and bulk handling properties of regular (non-agglomerated) and agglomerated powders. MPC powders produced using the N 2 injection (NI) process had significantly lower bulk density and flowability, higher wall friction angles and increased levels of interstitial and occluded air. Agglomerated MPC powders had higher flow index values, lower wall friction angles, but were more friable, compared to regular powders. Surface composition analysis of MPC powders showed that NI caused fat to preferentially migrate to the surface in comparison to powders spray dried without NI. The results obtained in this study demonstrate that the injection of N 2 into liquid MPC directly prior to spray drying, as well as agglomeration by fines return, can produce ingredients with unique particle and bulk powder properties. • N 2 injection decreased the density of milk protein concentrate powders. • Flow index values of powders decreased with N 2 injection. • Agglomeration by fines return improved powder flowability. • N 2 injection promoted the migration of fat to the surface of powder particles. [ABSTRACT FROM AUTHOR]