Influence of an Additional Indexing Rotary Axis on Wire Electrical Discharge Machining Performance for the Automated Manufacture of Fir Tree Slots.

The demand for higher efficiency in aircraft propulsion engines leads to materials with increasing thermomechanical strengths and new designs inducing filigree geometries of blisks and disks. Because of new designs which induce tighter tolerances, the high mechanical process forces in conventional cutting processes like broaching cause inacceptable geometrical deviations and high tooling costs. Due to the electro-thermal material removal mechanism, electrical discharge machining (EDM) ensures a force free and thus precise machining. The manufacture of fir tree slots in nickel-based alloys by wire EDM has been investigated in the last few years and the process was verified as an alternative technology for broaching. To get a better competitive position, the productivity can be prospectively increased by using an additional indexing rotary axis which ensures a precise and automated production of rotationally symmetric components and reduce production times, e.g., for the manufacture of fir tree slots on a disk. Nevertheless, the application of these axes cause changed flushing conditions and can also affect the electrical contacting as well. Both influence the process performance and demand a technology development or adjustment of standard machining technologies. The influence of these changed machining conditions has not been investigated scientifically to date. In this paper, the surface integrity and process performance of fir tree slots machined by wire EDM on the machine table are compared with the manufacture by using an additional indexing rotary axis. [ABSTRACT FROM AUTHOR]