Adjusting Ortho-Cycloalkyl Ring Size in a Cycloheptyl-Fused N,N,N-Iron Catalyst as Means to Control Catalytic Activity and Polyethylene Properties.

Five examples of bis(arylimino)tetrahydrocyclohepta[b]pyridine dichloroiron(II) complex, [2-{(Ar)N=CMe}-9-{N(Ar)}C10H10N]FeCl2 (Ar = 2-(C5H9)-4,6-(CHPh2)2C6H2Fe1, 2-(C6H11)-4,6-(CHPh2)2C6H2Fe2, 2-(C8H15)-4,6-(CHPh2)2C6H2Fe3, 2-(C12H23)-4,6-(CHPh2)2C6H2Fe4, and 2,6-(C5H9)2-4-(CHPh2)C6H2Fe5), incorporating ortho-pairings based on either benzhydryl/cycloalkyl (ring sizes ranging from 5 to 12) or cyclopentyl/cyclopentyl groups, have been prepared in reasonable yield by employing a simple one-pot template strategy. Each complex was characterized by FT-IR spectroscopy, elemental analysis, and for Fe3 and Fe5 by single crystal X-ray diffraction; pseudo-square pyramidal geometries are a feature of their coordination spheres. On treatment of Fe1–Fe5 with modified methylaluminoxane (MMAO) or methylaluminoxane (MAO), a range in catalytic activities for ethylene polymerization were observed with benzhydryl/cyclopentyl-containing Fe1/MMAO achieving the maximum level of 15.3 × 106 g PE mol−1 (Fe) h−1 at an operating temperature of 70 °C. As a key trend, the activity was found to drop as the ortho-cycloalkyl ring size increased: Fe1C5H9/CHPh2~Fe5C5H9/C5H9 > Fe2C6H11/CHPh2 > Fe3C8H15/CHPh2 > Fe4C12H23/CHPh2. Furthermore, strictly linear polyethylenes (Tm > 126 °C) were formed with molecular weights again dependent on the ortho-cycloalkyl ring size (up to 55.6 kg mol−1 for Fe1/MAO); narrow dispersities were a characteristic of all the polymers (Mw/Mn range: 2.3–4.7), highlighting the well-controlled nature of these polymerizations. [ABSTRACT FROM AUTHOR]