Short and long term optimization for micro-object conveying with air-jet modular distributed system.

Smart surface is a new conveying technology composed of a 2D planar surface presenting a matrix of distributed autonomous blocks. Every block contains a micro-electro-mechanical system (MEMS) actuator that controls the transfer of a possible object located above the block to the neighboring blocks, using air-jet forces. The spatial characteristics of the blocks impose some limits on the memory, energy and computation capabilities of the MEMS blocks. On the other hand, the system can reach several thousands of blocks making necessary to propose scalable algorithmic solutions. This paper studies different distributed algorithms to convey an object from an initial to a target position in the smart surface. The conveying policy emphasizes the long term use of the smart surface and the objects conveying efficiency measured by the time of the transfer. The problem stands as an original case of multi-objective Shortest Path problem (MOSP). Original because the quality of a given path is not evaluated by the sum of the weights of its segments, and because the segment weights change according to the used paths as provided by the algorithm itself. Therefore, the efficiency of a given algorithm is assessed on the basis of its performance during a long period of time. We describe here the best way to combine these two objectives and we propose a scalable incremental distributed protocol for objects conveying. The path optimality is adjusted according to the required calculation complexity. The performances of the different algorithmic and modeling variations are analyzed in terms of memory, time, computation and exchanged messages complexity. The obtained results prove the scalability of the algorithm, with linear computational, memory and convergence time complexity, and confirm the improvement of smart surface usage compared to a naive approach. The system lifespan increases of up to 130% on 40 × 40 smart surface, while the transfer cost (time and energy) is reduced. We show also that the computation time of the path with the incremental algorithm can be significantly reduced without significant degradation of the conveying system performance. For example, in a 40 × 40 smart surface, the number of messages is divided by 4 while the number of conveyed objects is only reduced by a ratio of 4%. • The smartsurface is new distributed conveying plateform • The smarsurface allows the manipulation and the transportation of fragile and tiny objects. • The distributed architecture ensures the modularity and maintainability of the system. • The smartsurface conveying problem is an original problem. • The conveying algorithm manages the tradeoff between the transfer time and the surface lifespan. • The computational complexity of the algorithm is less than O (m) • The algorithm convergence is reached with a time complexity of O (m). [ABSTRACT FROM AUTHOR]