Interface control for high-performance all-solid-state Li thin-film batteries.

We fabricated and evaluated four types of Li batteries, in this case a LTO/liquid electrolyte/Li battery, a LTO/LiPON/Li all-solid-state battery, and LTO/LiPON + liquid electrolyte/Li batteries with and without a separator to investigate and clarify the effects of each interface. Through the present research, it was found that a conventional polymer-based separator increases the impedance in the middle frequency region, resulting in an increase in the total cell resistance. After replacing the polymer-based separator with a thin-film solid electrolyte, the cycleability and capacity of the cell were comparable to those of a conventional Li-ion battery with a polymer separator. The all-solid-state Li thin-film battery without a liquid electrolyte exhibits the lowest capacity due to the large interfacial resistance between the Li metal and the LiPON solid electrolyte. However, we found that the insertion of an Al 2 O 3 interlayer between the Li and LiPON improves the capacity. [ABSTRACT FROM AUTHOR]