Fly ash from modern coal-fired power technologies: chloride ingress and carbonation of concrete.

Low-lime fly ashes produced from modern coal-fired power technologies (developed to enhance efficiency/lower emissions), including nitrogen oxide (NOx) reduction, co-combustion, supercritical steam and oxy-fuel combustion, and their effects on chloride ingress and carbonation of concrete are investigated in this paper. Earlier work indicates that some of these technologies influence fly ash properties, but they mainly follow typical behaviour found for the material (consistence and compressive strength) in concrete. Both accelerated and normal-type exposure tests were carried out on a range of practical water/cement ratio concretes (also enabling interpolation for comparisons at equal 28 d strength). The test fly ash concretes were evaluated against (i) those containing three reference fly ashes covering a range of fineness and (ii) corresponding studies on fly ash concretes from the 1990s. The results show that there was an influence of fly ash fineness, reflected in reactivity/porosity (measured on mortar), and aspects of chemistry on chloride ingress, but there appeared to be minor material effects on carbonation. Comparison with the 1990s data indicated similar behaviour for the materials between studies for both properties. A relationship was also identified for the product of reactive alumina and sub-10 μm contents of the modern fly ashes and chloride resistance of concrete. [ABSTRACT FROM AUTHOR]