Influence of envelope thickness and solar absorptivity of a test cell on time lag and decrement factor.

This work deals with the influence of envelope thickness and solar absorption on the time lag and the decrement factor. For this, a test cell of 1 m3 of volume is built with a material commonly used in construction in Senegal, the compressed earth brick stabilized with cement. The ambient-air temperature inside and outside of test cell and solar direct normal irradiance is measured. The test cell is modeled using EnergyPlus software. The comparison of experimental and theoretical ambient-air temperature puts out a great linear showing the reliability of the model. The time lag and the decrement factor are calculated using the air-sol equivalent temperature of the test cell and the inside ambient-air temperature. The time lag and decrement factor of the compressed stabilized earth brick envelope are respectively 0.22 and 6.6 h showing the good thermal inertia of those bricks. A parametric study is performed to determine the effect of envelope thickness and solar absorptivity on the time lag and decrement factor. The results show that the decrement factor decreases with envelope thickness while the time lag increases linearly and that an envelope thickness of 32 cm has a decrement factor of around zero with a maximum time lag of about 12 h for this type of material. The envelope's solar absorption has a moderate effect on the decrement factor and time lag. [ABSTRACT FROM AUTHOR]