An analogue Toma Hill formation model for the Tyrolian Fernpass rockslide.

The Fernpass rockslide occurred about 4100 years ago and is one of the largest rock slope failures in the Alps, the run-out area being characterized by a hummocky surface with Toma Hills that were formed after the rockslide event. These hills, characterized by a cone-like shape with a flattened top, are typical for many rockslides, and the name "Toma" is derived from local dialects in Switzerland and Tyrol, Austria. So far, five hypotheses have been proposed for the formation of Toma Hills, the two relating to glacial activity being outdated meanwhile. These hypotheses cannot explain all features observed on site. Therefore, to investigate one of these hypotheses, a qualitative laboratory-scale analogue groundwater flow model with the size 1.5 × 1 × 0.8 m was used to investigate the contribution of internal erosion by suffosion to forming Toma Hills. From the model, hydrogeological calculations of Darcy velocity and hydraulic conductivity were determined to help understand the present study. The average hydraulic gradient of the experiments was close to that in reality. Hydraulic conductivities in the five experiments were comparable to the calculated field hydraulic conductivity (Bialas and Seelheim equations). A limnokrene like one south-west of Biberwier developed in all experiments. Development of lateral and transversal cracks, water-filled lateral depressions of the material in the model and discharge of finer material implicated that internal erosion is a substantial contribution to the Toma Hill formation. Based on the experimental results, we deduce that Toma Hill formation took between 140 and 580 years. [ABSTRACT FROM AUTHOR]