Development of biodegradable semiconducting foam based on micro-fibrillated cellulose/Cu-NPs.

In this work regenerated cellulose was prepared by phosphoric acid as a primarily step in preparation of biodegradable foam. Copper nanoparticles (Cu-NPs) were embedded onto the cellulosic suspensions followed by freeze drying process. The scanning electron microscopy (SEM) revealed the presence of individual chunky regenerated cellulose fibers in the dimensions of micro that enhanced tendency to aggregate during drying. X-ray diffraction (XRD) demonstrated that, the treatment of cellulose with concentrated phosphoric acid led to defibrated cellulose with lower crystallinity index than original cellulose fibers. The study provided insights about the influence of the Cu-NPs on the structure, thermal stability and the electrical contributions of the considered cellulose-based foam. The electrical and dielectric properties were studied by means of the broadband dielectric spectroscopy. The dielectric spectra were dominated by an anomalous behavior of the permittivity as illustrated versus frequency of the investigated samples. The real part of conductivity follows the universal power law at higher frequencies. The foam loaded Cu-NPs exhibit biodegradability and highly efficient antimicrobial activity against Staphylococcus aureus , Pseudomonas aeruginosa , and Candida albicans. • Ecofriendly biodegradable, antimicrobial, semiconductor foam was prepared. • Micro-fibrillated cellulose was prepared by phosphoric acid treatment. • Cu-NPs were synthesized using CuSO 4 as precursor and starch as capping agent. [ABSTRACT FROM AUTHOR]