Design and simulation of a magnetohydrodynamic micro-pump to provide time varying tensile force for vibration suppression in viscoelastic micro-beams.

In this paper, a new strategy for providing tensile force to suppress the transverse vibration of a micro-beam is introduced. This axial tensile force is supplied by a specific fluid flow called "magnetohydrodynamics" (MHD), which flows in a micro-pump, and then the fluid enters the micro-beam. The micro-beam is vibrated by an oscillating external force acting at its base. Therefore, a fluid structure interaction problem arises. The pressure of the fluid is increased due to the Lorentz force appears in the micro pump, and is directed by the channel towards the micro-beam and suppress the vibration of the micro-beam. It was observed that when the magnetic field rises from 0.25 Tesla to 0.5 Tesla, the amplitude of the micro-beam fluctuations will decrease from 6 × 10−13m to 3 × 10−13m. Assuming a laminar and incompressible flow, the finite volume method (FVM) is used to solve the governing equations. In the design of the micropump, the parameters studied are the value of the magnetic field, the amount of voltage applied to the micro-pump, the external force oscillation amplitude and the Reynolds number, and the effect of each parameter on the fluid and micro-beam behavior. The results show that with increasing fluid pressure in the micro-pump, the micro-beam vibration is suppressed. In addition, the pressure of the fluid along the micro-beam remains constant at 0.1 percent. [ABSTRACT FROM AUTHOR]