Influence of pyrolytic temperature on optoelectronic properties and the energy harvesting applications of high pressure TiO2 thin films.

Abstract The present work deals with the development of a novel photocatalyst to decompose most of the organic pollutants. This work provides a strategy for reproducible high-pressure phases of TiO 2 at ambient conditions through nebulizer spray pyrolysis (NSP) technique by varying the substrate temperatures of 200–500 °C using titanium (IV) isopropoxide as a titanium precursor. The structural, morphological, optical and electrical properties of the deposited TiO 2 thin films were investigated by using X-ray diffraction, field emission scanning electron microscopy, UV–Visible spectroscopy, Hall effect and temperature dependent resistivity measurements, respectively. The structural analysis confirms that the films deposited at higher substrate temperature are crystallized in TiO 2 –II phase having polycrystalline nature with good crystalline quality and also pressure induced amorphous phases were also observed for the films deposited at lower substrate temperatures. Deposited films have the uniform surface with homogeneity and porous nature which is suitable for enhanced photocatalytic applications. Electrical measurements show that the films are having n-type behavior with appreciable carrier mobility and concentration. The use of high-pressure TiO 2 -II phase for higher photocatalytic efficiency was demonstrated. Highlights • First report on crystalline, high pressure TiO 2 –II thin films deposited at low temperature using spray pyrolysis. • Possibility of formation of pressure induced phases in nebulizer spray pyrolysis was discussed. • Optoelectronic property of the TiO 2 -II phase was completely studied. [ABSTRACT FROM AUTHOR]