The difference in low cycle fatigue behavior of CP-Ti under fully reversed strain and stress controlled modes along rolling direction.

Abstract In order to understand the effects of cyclic asymmetry and control mode on low cycle fatigue (LCF) behavior of CP-Ti along rolling direction (RD), symmetrical strain and stress-controlled fatigue tests were conducted in this paper. LCF behavior of CP-Ti along RD under different control modes was systematically compared from the aspects of cyclic response, microstructure evolution and fatigue life with the technique of electron backscatter diffraction (EBSD) and scanning electron microscope (SEM). It was found that cyclic softening resulted by dislocation slip dominates strain-controlled fatigue. On the contrary, cyclic hardening dominates stress-controlled fatigue at high stress amplitude, leading to a higher cyclic stress-strain curve. Owing to asymmetrical hysteresis loop, compressive ratcheting strain is accumulated in stress-controlled LCF test despite of the fully reversed stress cycling. EBSD results show there is a transition of deformation mechanism from dislocation slip to dislocation slip and twinning dominated cyclic deformation with the increase of compressive ratcheting strain. Meanwhile, GOS analysis and SEM observation indicate that the appearance of massive twins results in the heterogeneous plastic deformation and micro-cracks are favorable to be initiated in the twin abundant area. Besides, compressive ratcheting strain has significant effects on fatigue crack growth as the fracture surface presents the serious abrasion of cleavage facets and fatigue striations. Finally, strain-life curves under different control modes are identical, indicating that fatigue life along RD is insensitive to compressive ratcheting strain under the interaction of these factors. [ABSTRACT FROM AUTHOR]