Towards polylactide/core-shell rubber blends with balanced stiffness and toughness via the formation of rubber particle network with the aid of stereocomplex crystallites.

Abstract As the most promising bio-derived and biodegradable polymers with tremendous application potential, the practical application of poly(l -lactide) (PLLA) has been severely restricted by its inherent brittleness. Unfortunately, blending with various rubbers can substantially enhance the toughness of PLLA, but usually causes a significant deterioration in mechanical strength and modulus. In this work, taking novel PLLA/core-shell rubber (CSR) blends as an example, we describe a facile and robust strategy to obtain good stiffness-toughness balance by promoting the networking of CSR particles within PLLA matrix with the aid of stereocomplex (SC) crystallites. To do this, small amounts (5–20 wt%) of poly(d -lactide) (PDLA) were incorporated into the blends through simple melt-blending. The results demonstrate that the CSR particles can be uniformly dispersed in PLLA matrix due to the good interfacial compatibility, but the stereocomplex (SC) crystallites formed between the incorporated PDLA and PLLA matrix chains induces the organization of the CSR particles into a network-like structure in the matrix. Compared with the well-dispersed structure, the network-like structure can endow the PLLA/CSR blends with dramatically enhanced impact toughness, without compromising their mechanical strength and modulus, indicating a marvelous balance between the stiffness and toughness. Furthermore, the elongation at break of the blends is also enhanced greatly. These interesting findings suggest that the formation of SC crystallites could provide a promising avenue for fabricating CSR particles toughened PLLA blends with balanced stiffness-toughness. Graphical abstract Image 1 Highlights • A promising strategy to induce the networking of CSR particles in PLLA/CSR blends has been reported. • The CSR particles can be organized into a network-like structure in PLLA matrix under the drive of SC crystallites. • The SC crystallites is formed during melt mixing of the blends with small amounts of PDLA. • The formation of the network structure can significantly enhance the toughening efficiency. • The obtained PLLA/CSR/PDLA blends exhibit a balanced stiffness and toughness. [ABSTRACT FROM AUTHOR]