Effect of micro-additions of Ge, In or Sn on precipitation in dilute Al-Sc-Zr alloys.

Abstract Trace amounts of inoculants - germanium (0.02 at%), indium (0.02 at%) or tin (0.01 at%) - were added to a ternary Al-0.06Sc-0.06Zr at% alloy to study their effects on Al 3 (Sc,Zr) precipitation. During isothermal aging at 300 °C, the In- and Sn-containing alloys exhibit an early microhardness increases, which is attributed to In or Sn clustering. Peak isothermal microhardness due to Al 3 (Sc,Zr) precipitation is achieved simultaneously (~4 h) for the three inoculated alloys and an inoculant-free alloy. Isochronal aging produces a low-temperature microhardening response for the In- and Sn-containing alloys, followed by two microhardness peaks at 350 and 450 °C for all four alloys, associated with precipitation of Sc and Zr, respectively. Atom-probe tomography demonstrates partitioning of Ge and Sn (up to 0.5 at%) from the matrix to the Al 3 (Sc,Zr) precipitates, with partitioning to Sc-rich precipitate cores (for isothermal aging) or to both Sc-rich cores and Zr-rich shells (for isochronal aging). Inoculant partitioning at precipitate cores and early low-temperature microhardness increases are consistent with inoculant clustering to form nucleation sites for Sc and Zr precipitation. Inoculant segregation at the precipitate shells can be explained by co-precipitation of the fast-diffusing inoculant element and the slow-diffusing Zr, between which an attractive binding energy exists. When compared to the inoculant-free control alloy with a somewhat higher Sc content, the three inoculated alloys exhibit a 2- to 10-fold decrease in creep rates at 300 °C for stresses above ~18 MPa, but a small reduction in creep threshold stresses from 12 to ~10 MPa. [ABSTRACT FROM AUTHOR]