COMPLEXITY-BASED ANALYSIS OF THE INFLUENCE OF TOOL GEOMETRY ON CUTTING FORCES IN ROUGH END MILLING.

It is known that geometry of cutting tool affects the cutting forces in machining operations. In addition, the value of cutting forces changes during machining operations and creates a chaotic time series (signal). In this paper, we analyze the variations of the complex structure of cutting force signal in rough end milling operation using fractal theory. In fact, we analyze the variations of cutting force signal due to variations of tool geometry (square end mill versus serrated end mill). In case of each type of end mill, we did the machining operation in wet and dry conditions. Based on the results, the fractal structure of cutting force signal changes based on the type of milling tool. We also did the complexity analysis using approximate entropy to check the variations of the complexity of cutting force signal, where the similar behavior of variations between different conditions was obtained. The method of analysis that was used in this research can be applied to other machining operations to study the influence of different machining parameters on variations of fractal structure of cutting force. [ABSTRACT FROM AUTHOR]