Laser welding of polymers using unsymmetrical squaraine dyes.

Transmission laser welding of plastic is typically achieved by incorporating a laser absorbing dye into one of the two pieces of plastic one wishes to weld together and mediating the welding process using a laser emitting light at a suitable wavelength. Desirable properties of laser absorbing dyes include: (1) the dye is colorless in the visible region but absorbs strongly in the region at the wavelength where the laser emits, (2) the dye has a good conversion of the energy from the laser to heat, (3) the dye is stable enough to be incorporated into the molten plastic, (4) the dye is soluble in the plastic of choice to give an even distribution in the plastic, and (5) the dye is nontoxic. Here, we explore an alternative approach to achieve laser welding of colorless plastics using a laser dye that is colored, but that can be bleached after the welding process. Nonsymmetrical squaraine dyes were prepared by condensation of squaric acid and two equivalents of various 3,5‐dimethoxy‐N,N‐dialkylanilines. After the incorporation into polyethylene and laser welding, the plastic was bleached either by heat treatment or by irradiation with a high pressure Xe‐lamp giving colorless polyethylene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018, 56, 2245–2254 Laser welding of plastic is explored by incorporating colored (blue) unsymmetrical squaraine dyes into polyethylene plastic. After laser welding, the color from the dye was bleached either by heat treatment or by irradiation with a high pressure Xe‐lamp giving colorless welded polyethylene. [ABSTRACT FROM AUTHOR]