Understanding membrane fouling by oil-in-water emulsion via experiments and molecular dynamics simulations.

Abstract Membrane-based filtration is promising for the treatment of oily wastewater with stable micron-sized oil droplets, but is unfortunately limited by the inevitable membrane fouling phenomenon. To advance the understanding on membrane fouling by oil emulsion, this study made use of the direct observation through the membrane (DOTM) technique to experimentally visualize the evolution of fouling and determine critical flux, and also molecular dynamics simulations to unveil the interfacial interactions and behaviors underlying the different fouling behaviors. Three oil emulsion types with similar mean droplet sizes were studied, namely, one without surfactant, one stabilized by sodium dodecyl sulfate (SDS; a negatively charged surfactant) and one stabilized by dodecyltrimethylammonium bromide (DTAB; a positively charged surfactant). DOTM results indicate that the critical flux was the highest in the absence of surfactant and lowest for the DTAB-stabilized ones, while simulation results indicate that the interaction energies are clearly different among the different oil emulsion types. Both hence affirm that the presence of surfactant and different surfactant type distinctly changes the fouling tendencies. The key conclusions on the different fouling tendencies among the three oil emulsion types are summarized as follows. Firstly, the highest critical flux in the absence of any surfactant is linked to greatest oil-water interaction and least oil-membrane interaction, both of which cause the oil molecule to prefer being in the bulk aqueous feed. The radial distribution function (RDF) further substantiates this. Secondly, the higher critical flux exhibited by the SDS-stabilized oil emulsion compared to the DTAB-stabilized ones could be attributed to the negative charge of the former. Simulations affirm the comparatively greater oil-membrane repulsion through the RDF profile, lower oil-membrane interaction and higher oil-water interaction of the SDS-stabilized oil emulsion. Thirdly, despite surfactants generally have a stabilizing effect on oil emulsions, DOTM images show that coalescence was most extensive for the DTAB-stabilized oil emulsion, because of the greatest oil-membrane attraction and least oil-oil repulsion. Coupling both experiments and simulations, this study enhanced the mechanistic understanding on the effect of surfactant on membrane fouling by emulsions of the same oil. Highlights • Three oil emulsion types in the absence and presence of surfactant studied. • DOTM used to quantify critical flux and visualize evolution of fouling. • Presence of either surfactant reduced the critical flux of the oil emulsion. • Molecular dynamics simulation revealed different interaction energies. • Coalescence worst for DTAB-stabilized emulsion due to the least oil-oil repulsion. [ABSTRACT FROM AUTHOR]