Characterizing Uptake kinetics of PAHs from the Air Using Polyethylene-Based Passive Air Samplers of Multiple Surface Area-to-Volume Ratios.

Polyethylene passive sampling devices (PSOs) were deployed to investigate how passive samplers of multiple surface area-to-volume ratios could be used to characterize uptake kinetics for polyaromatic hydrocarbons (PAHs). Theoretically, uptake profiles for different thickness PSOs of the same surface area should show the following: where uptake is linear, the amount of compound accumulated in the different PSDs will be the same and where equilibrium is approached, the amount accumulated by the different PSDs will be proportional to sampler thickness. Polyethylene sheets of the same surface area and approximately 100 and 200 μm thickness were collected after 30,60, and 90 days of exposure along with samples from a codeployed high volume sampler. Twelve priority pollutant PAHs could be routinely quantified in replicate PSOs. Overall, reproducibility between replicate PSDs was satisfactory, with normalized differences rarely exceeding 25%. The smallest analytes quantified, fluorene, phenanthrene, and anthracene,were shown to approach equilibrium during the deployment period, whereas uptake for fluoranthene and pyrene moved into the curvilinear stage. For most of the larger molecular weight PAHs such as indeno[1,2,3-cd]pyrene, uptake could be described using a linear uptake model. Preliminary sampling rates for the compounds which remained in the linear stage of uptake ranged between 0.5 and 1.5 m³ d-1 dm-2. Sampler to air partition coefficients were estimated for PAHs which approached equilibrium and predicted for some of the other compounds. Results suggest that a single deployment of PSDs with multiple surface area-to-volume ratios can be sufficient to determine whether uptake was linear or approaching equilibrium for a range of PAHs. [ABSTRACT FROM AUTHOR]