Interaction of Lamb waves with the edges of a delamination in CFRP composites and a reference-free localization method for delamination.

Delamination is one of the most common types of damage in carbon fiber reinforced polymer composites. This paper analyzes the interaction of fundamental symmetric (S0) and anti-symmetric (A0) mode Lamb waves with the start and the end of a delamination using finite element simulations. Propagations of Lamb waves in a 4-layer [0/90]s laminate were compared with propagations obtained in a 1-layer [0] sub-laminate and in a 3-layer [90/90/0] sub-laminate, which are the two sub-laminates separated by the delamination. Results show that the Lamb waves travel at different velocities in the delaminated region and in the healthy region. Comparing the signals obtained in the delaminated region with the excitation, it was found that mode conversions happen at the edges of a delamination for both S0 and A0 waves. The mode conversion of S0 wave at the end of a delamination generates large A0 waves and causes most significant changes to the detection signal. Based on this feature, a reference-free localization method is proposed in this paper. By measuring the difference between the arrival times of two modes, the distance between pick-up sensor and the end of delamination can be estimated. This method was verified by signals obtained in finite element simulation. [ABSTRACT FROM AUTHOR]