Flashover performance of silicon rubber under combined AC-DC voltage and its improving method.

Composite insulators in valve tower of UHVDC converter station withstand combined ac-dc voltage. The flashover performance of silicone rubber under combined voltage is investigated in this paper. The voltages on the post insulator of valve tower under different operating conditions are simulated in PSCAD/EMTDC, and the harmonic components of the voltages are analyzed. The simulation results indicate that the ac frequencies of the voltage on the post insulator are mainly 50 Hz, 3n and 6n±1 times harmonics. The flashover voltages of silicone rubber under different combinations of ac and dc voltages are tested, including different single frequency ac voltages superimposed on different dc voltages, and different combined harmonic voltages superimposed on different dc voltages. The test results indicate that different ratios of dc voltage to ac voltage and different percentages of harmonics have various influences on the flashover voltage of silicone rubber. Moreover, argon atmosphere pressure plasma jet (Ar APPJ) is applied to modify the surface of the silicone rubber under different modification times and voltages. The flashover voltages and the surface morphologies of the silicone rubber before and after surface modification are compared. Surface modification by Ar APPJ can improve the surface resistivity of the silicone rubber significantly, and the flashover voltage also increases. [ABSTRACT FROM AUTHOR]