Analysis of stress increment in shot peen forming weak-stiffness component.

Shot peen forming is often used to form the aerodynamic configurations of aircraft integral wing panels. The component is traditionally regarded as perfectly constrained target in peen forming process. However, weak-stiffness of the component results in concomitant macroscopic bending and stretching deformations, and releasing of peening stresses. Subsequent peening stresses are induced by shot impacts based on the current released stresses. In this paper, a intermittently peening-releasing finite element simulation model is used to study peening stress evolution in lowrigidity plate. An algorithm is proposed to calculate the increment of subsequent peening stress by connecting current stresses to the peening stresses in perfectly constrained target.With the algorithm, the peen forming deformations of freely constrained plates are calculated by equivalently simulating the peen forming process. And strip peen forming deformations are calculated and compared with experimental data. The comparison shows the peening deformation of a low-rigidity component should be treated as an incremental process and the algorithm can be used to predict the deformation with good accuracy. [ABSTRACT FROM AUTHOR]