Hot cracking in pulsed Nd:YAG laser welding of AA5456.

A 700 W pulsed Nd:YAG laser welding was employed to weld 5456 aluminum alloy plates with thickness of 5 mm. The weld penetration and tendency of liquation cracking in the heat affected zone and solidification cracking in the weld metal are investigated. It is found that hot cracks can be avoided by pulsed laser in preheated status. Increasing the laser average power in fixed pulse frequency and pulse duration resulted in a significant reduction in hot cracking tendency in pulsed laser welding. Also, the hot cracking susceptibility is reduced with increasing pulse frequency up to 50 Hz in fixed average power and pulse duration. The hot cracking tendency can be decreased by pulse duration decrement to 6 ms in fixed average power and pulse frequency. The factors contributing to the prevention or reduction of hot cracks in laser welding of aluminum alloy 5456 are the reduction in cooling rate causing change in solidification mode from columnar to equiaxed grains, and backfilling of liquated grain boundaries. With a 0.4 mm beam diameter Nd:YAG pulsed laser at 300 W average power, 6 ms pulse duration, 20 Hz pulse frequency, 5 mm/s travel speed and 150 °C preheating temperature, hot crack-free weld cross sections were achieved. [ABSTRACT FROM AUTHOR]