CuInSe2 nanostructures prepared by chemical close-spaced vapor transport for hybrid photovoltaic devices.

This work focuses on the fabrication of stoichiometric CuInSe 2 nanostructures with controllable physical parameters of the nanocrystals suitable for hybrid organic/inorganic photovoltaics. CuInSe 2 nanostructures were prepared by the chemical close-spaced vapor transport (CCSVT) method onto Mo/barrier/glass substrates by using an In 2 Se 3 source material and Cu precursors. The In 2 Se 3 source material was volatilized in H 2 ambience with the addition of HCl vapors at 550 °C. Three different types of Cu precursors were used: (i) Cu thin films (6–250 nm thick) deposited by e-beam, (ii) Cu nanoparticles prepared by spray pyrolysis and (iii) Cu nanostructures formed by applying the nanosphere lithography (using a monolayer of 450 nm nanospheres). The CCSVT process parameters were varied to reveal the optimum conditions for the preparation of secondary phases free CuInSe 2 nanostructures. The structural characterization by x-ray diffraction in both grazing incidence and Θ-2Θ configurations revealed the formation of CuInSe 2 chalcopyrite phase independently on the applied precursor type. The elemental composition of the as-prepared CuInSe 2 nanostructures was analyzed by laser ablation-inductively coupled plasma mass-spectrometry. In non-optimised processes, an excess of Se compared to stoichiometric composition was detected and attributed to the formation of molybdenum selenide and indium selenide phases. The formation of the latter secondary phases was suppressed by tuning the CCSVT deposition parameters. [ABSTRACT FROM AUTHOR]