用于 ISE 硝态氮检测的土壤原位前处理装置设计与试验.

Rapid lower-cost detection methods for soil macronutrient, including soil samping, sample pretreatment and nutrient determination, are urgently needed. In this paper, a prototype soil rapid pretreatment device was introduced for the ion-selective electrode (ISE) based in-situ soil nitrate-nitrogen detection. Necessary pretreatment steps of soil weighting, extracting and filtration were achieved in the integrated device. The mechanical structure of the device was composed of 4 major components, including a two-dimensional work bench, a high-speed centrifuge, a liquid pump and a self-designed electric control unit. The two-dimensional work bench was built with a vertical sliding table and a rotary table. On the purpose of eliminating the “suspension disturbance” of ISE, the centrifuge was used to obtain the clear soil extract solution. The peristaltic liquid pump, which conducted the quantitative injection of the soil extractant solution into centrifugal tube, was involved for the soil extractant injection and stirring. The electric control unit consisted of a microprocessor of STM32F103 and its interface circuit, which was used for the precise control of the two-dimensional work bench. The soil moisture sensor was applied to reduce the interference of soil water content. Net weight of the testing sample could be calculated. According to the testing results, the displacement accuracy of the vertical sliding table was less than 0.1 cm, while the root mean square error (RMSE) and mean relative error (MRE) were less than 0.04 cm and 0.4% respectively. The one-way displacement of 10 cm consumed less than 5 s. The accuracy of the angular movement for the rotary table was 1°. The rotating speed was calculated through the ratio between rotation angle and time, which could reach 10°/s. The two-dimensional work bench possessed good repeatability with the coefficient of variation (CV) of less than 0.40%. The accuracy of the liquid pump was also evaluated. Two injection volumes of 12.5 and 25 mL were selected. A volume accuracy of 0.2 mL was obtained. The RMSE, the MRE and the injection time were examined to be 0.07 mL, 0.24% and 13 s, respectively. The continuous injection operation possessed a high repeatability with the CV of less than 0.1%. Therefore, the extractant injection performance was verified to be reliable and accurate. The performance of the self-designed device was estimated in the nitrate-nitrogen detection of wet soil. Comparisons were conducted among 3 groups of ISE-based detections and the standard spectrometric detection. The 3 groups of ISE-based detections included the fast pretreatment group, the soil suspension group and the conventional pretreatment group. The fast pretreatment group was processed by the self-developed pretreatment device discussed above. Samples of the soil suspension group were prepared without filtration operation. The conventional pretreatment group was conducted under the national site-specific soil testing recommendation. Compared with the standard spectrometric detection, the poor detection accuracy with the biggest absolute error (AE) of 76.86 mg/kg was determined in the soil suspension group. The slope of regression equation was 2.27, which indicated a non-negligible deviation from the real condition. As expected, the ISE detection, conducted by the self-designed device, was much closer to the standard spectrometric. The adjusted determination coefficient (R2) of the regression equation was 0.87 and the equation slope was 1.31, which was less than 2.27 obviously. The average AE was decreased to be 20.97 mg/kg. The RMSE of 22.34 mg/kg was found. Meanwhile, the labor intensity was greatly reduced. However, the fast pretreatment group still exhibited the obvious difference with the conventional pretreatment group. In all, the device discussed in this study demonstrates a promising result, which might provide references for the ISE applications of in-situ soil macronutrient rapid detections. Further modification on the mechanical structure for extracting is required to enhance its performance. [ABSTRACT FROM AUTHOR]