Back to Search Start Over

Variations of hydraulic properties of granular sandstones during water inrush: Effect of small particle migration.

Authors :
Ma, Dan
Rezania, Mohammad
Yu, Hai-Sui
Bai, Hai-Bo
Source :
Engineering Geology. Jan2017, Vol. 217, p61-70. 10p.
Publication Year :
2017

Abstract

The evaluation of the hydraulic properties evolution of granular sandstones in relation with groundwater inrush within faults is an important issue for mining engineering applications. This paper presents the results of an experimental investigation of small particle migration from granular sandstone samples under different original porosities, particle size compositions and water flow pressures. A new rock testing system has been setup to carry out the tests. Based on the results, it is observed that the overall permeability evolution during the tests can be divided into four different phases, including i) re-arrangement of large rock fragments, ii) water inrush with substantial particle migration, iii) continued moderate particles seepage, and iv) steady state water flow. The crushing of edges and corners of large rock fragments, and the evolution of the fracture network has mainly been observed in the first two phases of the tests. The results indicate that the migration of small particles has an essential effect on permeability and porosity increase during water inrush through fractured sandstone. The samples with higher original porosity, higher percentage of fine particles in their formation and under higher water flow pressures, achieve higher permeability and porosity values when the test is complete. Furthermore, using the measured data, the performances of a number of empirical models, for permeability evolution in fractured porous media, have been studied. The prediction results indicate that not all of the fractures in a sample domain contribute in small particle migration. There are parts of the fracture network that are not effective in particle flow, a sample with less original porosity, more fine particles and under lower water pressure shows less ineffective fractures. Therefore, using the concept of the effective porosity (fracture) is sufficient enough for the flow calculation. [ABSTRACT FROM AUTHOR]

Details

Language :
English
ISSN :
00137952
Volume :
217
Database :
Academic Search Index
Journal :
Engineering Geology
Publication Type :
Academic Journal
Accession number :
120754789
Full Text :
https://doi.org/10.1016/j.enggeo.2016.12.006