Oil condition monitoring for HEMM – a case study.

Purpose The paper aims to monitor the condition of heavy Earth-moving machines (HEMMs) used in open cast mines by lube oil analysis.Design/methodology/approach Oil samples at periodic interval were collected from the HEMM engine (Model No: BEML BH50M). Ferrography and Field Emission Scanning Electron Microscopy have been used for the wear particle analysis present in oil samples. Viscosity analysis and Fourier transform infrared spectroscopy have been done to investigate the degradation in quality and changes as compared to the initial structural properties of the lubricants.Findings The results obtained indicates wear in cylinder liner and piston ring. Copper, cast iron, alloy steel and ferrous oxide have been found as rubbing wear particles and cutting wear particles. Contamination level has also been found to be increasing in consecutive older oil samples. Chemical properties degraded with usage time and variations in oxidation and soot level have also been observed in every sample.Practical implications The results will be very much useful to maintenance teams of mining industry for early prediction of any impending failure of the machines, for example, diesel dilution, severe wear of the piston or cylinder liner leading to seizure can be predicted.Originality/value The HEMMs are an important piece of equipment in coal mining. Proper condition monitoring of HEMM is required to reduce the break down and down time to increase production. [ABSTRACT FROM AUTHOR]