SMAP L-Band Microwave Radiometer: RFI Mitigation Prelaunch Analysis and First Year On-Orbit Observations.

The National Aeronautics and Space Administration's (NASA) Soil Moisture Active and Passive (SMAP) mission, which was launched on January 31, 2015, is providing global measurements of soil moisture and freeze/thaw state. The SMAP radiometer operates within the protected Earth Exploration Satellite Service passive frequency allocation of 1400–1427 MHz. However, unauthorized in-band transmitters and out-of-band emissions from transmitters operating at frequencies adjacent to this allocated spectrum are known to cause interference to microwave radiometry in this band. Because measurement corruption by these terrestrial transmissions, which is referred to as radio-frequency interference (RFI), threatens mission success, the SMAP radiometer includes special flight hardware to enable the detection and filtering of RFI. Results from the first year of SMAP data show the presence of RFI with frequent occurrence over Asia and Europe. During the calibration/validation stage of the mission, the RFI detection and mitigation algorithms were modified to provide enhanced performance. Analysis of the L1B_TB products indicates good algorithmic performance with respect to RFI detection and removal. However, some regions of the globe (e.g., Japan) continue to experience complete data loss. This paper summarizes updates to the SMAP RFI processing algorithms based on prelaunch tests and on-orbit measurements, as well as RFI information obtained in SMAP's first year on orbit. [ABSTRACT FROM AUTHOR]