Flexure-based dynamic-tunable five-axis nanopositioner for parallel nanomanufacturing.

With the increasing demand for devices and systems with nanometer precision in the modern manufacturing industry, tip-based nanofabrication (TBN) has become an indispensable part of manufacturing process. However, a common issue that needs to be addressed is to increase the throughput of TBN, which is sequential and inherently slow. To overcome the difficulty, in this paper we present the design and control of a flexure-based five-axis nanopositioner with dynamic-tuning capability for parallel nanomanufacturing applications. The dynamic-tuning method enables trade-offs between the range and speed of the nanopositioner so as to increase the throughput of the nanomanufacturing system. The experimental results indicate that the nanopositioner conforms with the in-plane range and resolution requirements, i.e., ±5 mm/100 nm in X / Y axis, while its natural frequencies in X / Y axis can be increased by two to three times at the expense of decreased stroke, i.e., elastic range. In addition, real-time dynamic-tuning experiments show active vibration cancellation techniques can be implemented on the nanopositioner and effectively eliminate the unwanted dynamics and improve the overall dynamic performance. Lastly, we performed nano-scratching experiments using an 18 tip AFM array to fabricate optical grating patterns on gold coated silicon substrates of 5 × 1 mm 2 to demonstrate the practicality of the new method. The experiment confirmed good parallelism had been achieved during the experiments, where the scratched gold lines have a consistent depth of ∼160 nm. [ABSTRACT FROM AUTHOR]