Calculation of a building's life cycle carbon emissions based on Ecotect and building information modeling.

Buildings are responsible for more than 40% of global energy usage and as much as 33% of global greenhouse gas emissions in both developed and developing countries. However, the study of carbon emissions over a building's life cycle based on Ecotect and building information modeling in developing areas of Nanjing has yet to be conducted. Therefore, the results and recommendations of this paper represent a contribution to the literature on this topic. The scientific value of this paper is that Ecotect and building information modeling can be helpful in simplifying the estimation of carbon emissions over a building's life cycle because they can provide a majority of the information and calculation tools necessary for performing an life cycle assessment (LCA), which may alleviate the problem of insufficient information when executing an LCA of a building. A sensitivity analysis was performed by changing several parameters to identify the parameters that have the largest impacts on the performance a building. A comparison of the life cycle carbon emissions for each stage showed that the operational stage is the largest contributor to carbon emissions. Approximately 85.4% of the total carbon emissions were generated during operation. The construction stage accounted for 12.6% of the total carbon emissions. Approximately 2% of the total carbon emissions occurred during the demolition stage. Compared to the total carbon emissions over the entire life cycle of the building, carbon sequestration by vegetation was minimal. Thus, these findings indicate that governments can achieve the greatest reductions in carbon emissions by targeting the operational phase of buildings. However, the opportunity for addressing non-operational phases should not be ignored because the average carbon emissions per working area per year of non-operational stages are far greater than those of the use phase. [ABSTRACT FROM AUTHOR]