Multi-scale defect interactions in high-rate failure of brittle materials, Part II: Application to design of protection materials.

Micromechanics based damage models, such as the model presented in Part I of this 2 part series ( Tonge and Ramesh, 2015 ), have the potential to suggest promising directions for materials design. However, to reach their full potential these models must demonstrate that they capture the relevant physical processes. In this work, we apply the multiscale material model described in Tonge and Ramesh (2015) to ballistic impacts on the advanced ceramic boron carbide and suggest possible directions for improving the performance of boron carbide under impact conditions. We simulate both dynamic uniaxial compression and simplified ballistic loading geometries to demonstrate that the material model captures the relevant physics in these problems and to interrogate the sensitivity of the simulation results to some of the model input parameters. Under dynamic compression, we show that the simulated peak strength is sensitive to the maximum crack growth velocity and the flaw distribution, while the stress collapse portion of the test is partially influenced by the granular flow behavior of the fully damaged material. From simulations of simplified ballistic impact, we suggest that the total amount of granular flow (a possible performance metric) can be reduced by either a larger granular flow slope (more angular fragments) or a larger granular flow timescale (larger fragments). We then discuss the implications for materials design. [ABSTRACT FROM AUTHOR]