Discrete element modelling of rock cutting: from ductile to brittle transition.

It is well accepted that there is a transition of failure mode from ductile to brittle with increasing depth of cut during rock cutting process. Rock failure modes affect cutting efficiency, and knowledge of the failure transition is essential to the determination of optimum cutting parameters. The critical transition depth can be linked with rock properties. In this study, an attempt was made to model rock cutting process and to check the dependence of the critical failure mode transition depth on the brittleness of rock. For this purpose, dimensional analysis was first performed to establish the correlations between rock macro-properties and micro-parameters for discrete element simulations. Following the specimen calibration procedure, two types of synthetic rocks having approximately the same uniaxial compressive strength were generated as the synthetic specimens for simulating the rock cutting process. The first specimen was created using conventional model construction method with identical bond strengths between particles, giving rise to undesirably high indirect tensile strength. The second specimen was created using a proposed clustering algorithm such that the ratio between the tensile and compressive strength matches reasonably well with that of real rocks. The results of rock cutting simulations demonstrate that failure mode transition took place in both models, but for the clustered model the transition emerged at a shallower cutting depth. A further exploration was made to derive the critical depth for this transition based on the simulations performed on the clustered models. The derived relationship indicates that the critical transition depth decreases as strength ratio or brittleness of the rock increases. This provides a very useful tool for predicting the critical depth which can be used to help cutting tool design and cutting parameter optimisations. Copyright © 2015 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]