Numerical analysis of temperature profiles during thermal modification of wood: chemical reactions and experimental verification.

Numerical analysis of temperature profiles during thermal modification of wood was carried out. The numerical solution - based on finite element analysis, FEA - of the 3D problem of transient nonlinear heat transfer model is presented for wood as a typical anisotropic material. The numerical model was enhanced for describing chemical reactions of cellulose, hemicelluloses and lignin (pyrolysis model), which takes into account the exothermic reactions as an internal source of heat energy. Experimental as well as theoretical process schedules were applied and the influence of sample dimensions (sample geometry) and wood species was studied. The influence of wood species was negligible on heating time to reach the highest temperature, i.e., the temperature differences were about 2°C during the drying phase. A expected, the sample size played an important role in the heating duration and in terms of the exothermic reactions of wood. The experimental and numerical data are generally in good agreement. The numerical error increased in the range of higher temperatures. The results can be improved by consideration of wood species (mass of wood compounds) and boundary conditions in the pyrolysis model, thus, better insight into details of thermal modification of wood could be reached. [ABSTRACT FROM AUTHOR]