Search

Density detection and foreign object detection are very significant to ensure the quality of particleboard production and are important links in the quality control of pavement. This study analyzes the density uniformity of the paving process by average surface density, horizontal and vertical zoned average surface density based on CT values detected by X-rays, and studies the parts and causes of density non-uniformity. A foreign object detection scheme of alarming and then detecting is proposed to detect the presence of foreign objects in paving boards by MobileNetV3. Classification and localization of defects are performed by the improved YOLOv8 model with a multi-window sliding detection method, which introduces the backbone network of MobileNetV3 to simplify the network structure, and enhances the feature extraction capability and the detection of small targets by improving the C2f of YOLOv8 and increasing the detection branches. The experimental results show that the detection precision of the foreign object alarm is 96.72%, the recall rate is 95.80%, and the mAP value is 95.65%. In the defect slice dataset, the improved YOLOv8 defect detection algorithm has a detection precision of 97.96%, a recall rate of 97.60%, and a mAP value of 89.55%. [ABSTRACT FROM AUTHOR]

Free formaldehyde released after particleboard production poses significant risks to human and environmental health. This study investigated the impact of adding activated carbon produced from pine wood waste to particleboard on formaldehyde emissions to lessen this risk. In the first stage of the study, pine wood waste was activated with zinc chloride (ZnCl2) at 600°C for 90 min to produce activated carbon. The activated carbon was examined by scanning electron microscope, thermogravimetric analysis, Brunauer–Emmett–Teller (BET) analysis, fourier-transform infrared spectroscopy and X-ray diffraction. BET surface area of the produced activated carbon was 1102 m2/g. In the second stage of the study, activated carbons (0.5%, 1.0% and 1.5%) were added to a commercially preferred three-layer particleboard to enhance its mechanical, thermal and physical properties. In addition, the effects of the activated carbon on the free formaldehyde emissions of particleboard at 0 and 6 months were investigated. It was found that the free formaldehyde emissions of particleboards with activated carbon addition decreased by 24% at 0 months- and 6 months by 27% compared to the control group. Thus, waste material that has become a more valuable product as activated carbon will minimize harm to the environment and humans. [ABSTRACT FROM AUTHOR]

This study aims to investigate the mechanical, thermal, morphological, and characterization properties of a polymer composite composed of water hyacinth plant fibres. In order to improve the mechanical properties of the composite specimens, a new powder derived from the moringa plant was used for the first time as a filler material in the water hyacinth plant-reinforced polymer composites. In this study, composite specimens were prepared using a hot compression moulding machine. The weight percentage of moringa resin filler powder and hyacinth fibre was varied during the process from 2.5 to 7.5% and 15 to 35%. The resulting tensile strength ranged from 18.24 MPa to 32.14 MPa, flexural strength ranged from 38.64 to 56.32 MPa, impact strength ranged from 1 to 3.75 J, and hardness ranged from 66 to 98 Shore D hardness. The composite sample containing 5% moringa filler powder and 30% WH fibre content achieved high mechanical strength, maximum decomposition temperatures, and high crystallinity percentages. It exhibited 11–13% higher strength compared to the other samples. Absorption studies showed weight gains of 3.42% and 4.45% for water and chemical absorption, respectively. The fracture surfaces of the composite specimens were analysed using the SEM technique. The fabricated composites could be useful for particle board and medium density fibre board applications. [ABSTRACT FROM AUTHOR]

In order to develop formaldehyde-free adhesive for particleboard and meet the broad market demand, this paper fo‐ cused on the application problems of traditional starch adhesive, such as low solid content, high viscosity, poor water resistance and so on, and a novel formaldehyde-free starch adhesive DSA was used to prepare particleboard. The effects of hot pressing curves, dos‐ age of adhesive, and the combined application of DSA and pMDI on the properties of particleboard were investigated. The results showed that the performance of the novel formaldehyde-free starch adhesive DSA was slightly inferior to that of pMDI, but the com‐ bined use of DSA and pMDI exhibited a synergistic effect of saving adhesive and enhancing efficiency. Furthermore, the use of DSA could replace approximately 20% of isocyanate adhesive, meanwhile the hot pressing factor was reduced by 13. 3%, which was benefi‐ cial for improving the production efficiency of ENF grade particleboard. When DSA adhesive was used alone or in combination with pMDI, it could effectively play the role of bonding, filling, chain extension and curing. The application of DSA could help to solve the key problems of poor technological performance and poor water-resistant bonding performance of traditional starch adhesive, and pro‐ mote the large-scale application of biomass green adhesive in wood-based particle boards. [ABSTRACT FROM AUTHOR]

The continuous rise in global demand for wood products has led to an increase in prices and a surge in research into alternative resources. As a byproduct of the timber industry, bark has emerged as a promising supplement in particleboard (PB) production. However, its anatomical structure, the presence of extractives, and its inferior mechanical properties complicate the production process, which have not yet been fully overcome at a commercial scale. This study proposes a paradigm shift, advocating for separate and specialized bark constituent processing in a wet state. Three bark-based raw materials—namely, outer bark particles, bark fiber clumps, and bark fibers—were investigated under varying wood content scenarios. PBs with a target density of 0.7 g/cm3 and a thickness of 16 mm were produced using mixtures of these bark-based materials and wood particles in different ratios bonded with a urea–formaldehyde adhesive. The results demonstrated that these bark constituents exhibit distinct properties that can be optimized through tailored processing techniques. Compared to bark fibers, outer bark particles displayed about 40% lower water absorption and thickness swelling. However, bark fibers improved the internal bond by about 50% due to their favorable morphology compared to outer bark. These findings highlight the potential of bark as a valuable resource for particleboard production and pave the way for its efficient utilization through specialized processing strategies. [ABSTRACT FROM AUTHOR]

The development of multifunctional electromagnetic interference (EMI) shielding materials with low cost, stable performance and mass production is still facing great challenges. High-density traditional metals limit the application of EMI shielding materials. The unique structure of wood is considered an effective way to solve the above-mentioned problems. In this study, waste wood was used as raw material to prepare low-energy metallized particleboard. The particleboard was functionally finished to show excellent hydrophobic properties and been used stably in a humid environment. Dynamic thermal mechanical properties and mechanical properties analyses of particleboard were carried out. The bend strength (MOR), elastic modulus (MOE) and tensile strength were 30.50 MPa, 5384 MPa and 7.85 MPa, respectively. Metallized particleboard exhibited excellent electromagnetic shielding effectiveness (EMI SE) (average value 81.62 dB) in the entire X-band. The preparation of wood-based shielding metallized particleboard provides a feasible strategy for replacing traditional metal materials. [ABSTRACT FROM AUTHOR]

This paper aims to verify the effect of water-soluble hydrophobisations on cementitious composites such as concrete (S1) and cement-bonded particle boards (S2). The research was focused on the water-soluble hydrophobisations based on methylsilanolate (MS), a mixture of silanes and siloxanes (SS) and alcohol with the addition of nano-silica (N). The results provide a comprehensive overview of the benefits and effectiveness of water-soluble hydrophobisations in the context of building materials, outlining a direction towards the development of new, more environmentally friendly solutions in the construction industry. For this reason, alternative raw materials (brick recyclate and brick dust) were used for S1 substrate preparations. How the water-soluble hydrophobisations, including hydrophobisations with the addition of nano-silica (N), affect the process of water evaporation during hydration and the resulting water repellence of the S1 and S2 substrates were experimentally verified through a series of tests, e.g., measurement of the contact angle and depth of water penetration under pressure. The evaluation of the effect of hydrophobisations on the resistance of substrate to aggressive gaseous and liquid environments was observed by the determination of the resistance to carbonation and sulphation processes and the resistance of the concrete to aggressive liquid media (10% H2SO4, 10% CH3COOH). Although the hydrophobisations did not have a significant effect on some aspects of S1, such as the resistance to carbonation and sulphate attack, improvement was observed in other areas, such as the quadrupling increase in contact angle of the surface and 9 mm decrease in water pressure penetration into the concrete substrate. [ABSTRACT FROM AUTHOR]

The demand for innovative products from renewable sources has motivated research development to create new sustainable materials. Cassava starch (CS) has been widely used for bonding and composing different types of products. Particleboards produced from cocoa (Theobroma cacao), wood wastes, and CS adhesives can be an environmentally correct and economically profitable alternative to replacing traditional commercial panels. This study aimed to manufacture particleboards made with wood waste extracted from the stem of Theobroma cacao. The panels were bonded with different proportions of CS and urea–formaldehyde (UF) adhesives, and their physical–mechanical properties were determined. To manufacture the panels, cocoa wood wastes were mixed with the adhesive in ratios of 90:10, 70:30, and 50%:50% (CS/UF). Two control treatments were bonded with 100% of both adhesives. The resulting particleboards were employed as a reference to compare properties. The manufacturing process was carried out by cold pressing. Apparent density, water absorption, thickness swelling, and static bending strength were found for all panels. The data obtained were subjected to Levene's homogeneity test, Shapiro–Wilk's normality test, analysis of variance (ANOVA), and Tukey's mean test. The results showed that the highest density value was 497.0 kg m−3, corresponding to the treatment composed of cocoa wood wastes bonded with 100% CS adhesive. The water absorption and thickness swelling results after a 24 h immersion showed that the panel formed using cocoa wood wastes and 100% UF had the lowest values, 22.1 and 11.2%. The highest bending strength value was 13.1 MPa for the experimental treatment composed of cocoa wood residue and 100% UF. However, this result did not differ statistically from the treatment (50–50). Therefore, cocoa wood waste combined with adhesive CS may be a sustainable alternative for producing particleboards. [ABSTRACT FROM AUTHOR]

Particle boards are commonly manufactured from wood-based material bound with a thermosetting adhesive based on the reaction of formaldehyde with phenol, urea, melamine, or co-condensates. The use of formaldehyde is a cause for concern due to its harmful emissions. This study investigates the use of an alternative binder combined with particles derived from a short-cycle crop as an alternative to timber derived particles. A low density particle board was developed using hemp shiv as an aggregate with a binder made with crude glycerol, derived from the waste stream of the bio-diesel industry, esterified with citric acid under heat activation. This board was characterized and found to have good mechanical properties, low thermal conductivity, and good moisture buffering. Dimensional stability was compromised by swelling when exposed to water, but it will be possible to address this shortcoming using hydrophobic additives. The acoustic properties of the board were also found to be excellent, showing potential for use as a thermally insulating acoustic separator for internal walls. [ABSTRACT FROM AUTHOR]

The high extractives content in rice straw severely hinders surface adhesion, resulting in poor strength and dimensional stability of rice straw particleboard bonded with castor oil-based polyurethane (CPUR) resin. In this study, rice straw was pretreated with liquid hot water (LHW) at 150 °C for 20 min to reduce its extractives content for particleboard production with CPUR resin. The effects of LHW pretreatment on the chemical composition of the rice straws was evaluated. In addition, effects of CPUR resin dosage and density on mechanical properties and dimensional stability of the rice straw particleboards were investigated. The results indicated that LHW pretreatment significantly reduced the extractives and hemicellulose contents of the rice straw. The LHW pretreatment significantly improved the mechanical properties and dimensional stability of the rice straw particleboards. The overall performances of the rice straw particleboards were enhanced as the CPUR dosage increased. Increase of density led to upgraded mechanical properties but lowered dimensional stability of the rice straw particleboards. [ABSTRACT FROM AUTHOR]

This study aimed to develop new composites and evaluate the physico-mechanical properties and formaldehyde content of flat-pressed three-layer particleboard (FPTP) made of bamboo (as a face material) and rubberwood (as a core material) residue bonded with urea-formaldehyde adhesive. Different ratios of core and face material were adopted to investigate the effects of these ratios on the properties of the particleboards. The results indicate that increasing the proportion of rubberwood particles enhanced mechanical properties. All particleboards complied with the maximum permissible thickness swelling percentage (12%) specified in IS 3087 (2005) for Grade 2 category boards. While the moduli of rupture and elasticity values increased with higher rubberwood content, the particleboards did not satisfy the IS 3087 (2005) standard overall. However, the internal bonding strength of T4 (0.5 N/mm²) met the minimum requirement. Nail and screw withdrawal resistance of the particleboards indicated significantly higher resistance with increased rubberwood proportion. Only T4 particleboards met the minimum requirement stipulated by IS 3087 (2005) regarding screw withdrawal resistance for both Grade 1 and Grade 2 category boards. All boards met the criteria for the E2 classification (formaldehyde content ≤ 30 mg/100 g for oven-dried boards). [ABSTRACT FROM AUTHOR]

Sorbitol, a biobased sugar alcohol derived from renewable sources, was used to synthesize impregnation resins and corresponding B-stage impregnated resins (resin-impregnated décor papers) with enhanced biobased content. In this study, thermal analysis was conducted using differential scanning calorimetry and attenuated total reflectance Fourier transform infrared spectroscopy measurements to investigate the cure behavior of the prepared sorbitol–melamine–formaldehyde (MF) liquid resins as well as corresponding B-stage impregnated resins. The technological performance of the various modified thermosetting resins was further assessed by laminating the impregnated décor papers on particle boards and subsequently testing the resulting surfaces according to standard qualitative tests. The addition of sorbitol during the condensation phase of resin synthesis allowed the formulation of MF resins with enhanced biobased properties and good impregnation behavior. The study has shown that the addition of sorbitol in different concentrations to the MF resin formulation changed the surface tension and rheological properties as well as the cure kinetics of the MF resin system. Variations in the activation energy (Ea) regime with respect to conversion (α) were observed, indicating a kinetically complex process involving multiple steps and revealed deviations in the cure mechanism between modified and unmodified MF impregnation resins during cross-linking. The FTIR spectra obtained during the curing process of the resins, followed by principal component analysis, provided additional indication of altered and potentially enhanced cross-linking mechanisms in the sorbitol-modified resins compared to the reference MF resin system. Moreover, improved laminate surface properties were observed for particle boards produced with sorbitol-modified impregnation resins, which surpassed conventional MF resin formulations. Standard qualitative tests revealed enhanced surface durability and optical appearance for panels made with sorbitol-modified MF resins. [ABSTRACT FROM AUTHOR]

The demand for particleboard is increasing along with economic and population growth. However, two major barriers to the manufacture of particleboard are a shortage of raw materials (woodchips) and the emission of formaldehyde from conventional adhesives. Agricultural by-products such as corn stalks contain an abundance of renewable lignocellulosic fiber. This study evaluates the effect of citric acid as a natural adhesive and fire retardant addition on the physical, mechanical, and fire retardancy properties of particleboards fabricated from corn stalks. A cost-effective and inorganic salt, calcium carbonate, was tested to enhance the fire retardancy. Ammonium dihydrogen phosphate was also considered as a comparative control. Particleboards with the addition of calcium carbonate was pretreated with sodium chloride. The particleboards were pressed for 10 min at 200°C. Japanese Industrial Standard JIS A 5908:2022 was used as the benchmark for the physical and mechanical tests. Fire retardancy was dynamically tested by simulating a Bushfire Attack Level of 19 kW/m2. The particleboard with 25 wt% citric acid had superior mechanical properties and complied with the JIS A 5908 standard for Type 13 base particleboard. Particleboard with the addition of calcium carbonate (5% and 10%) showed significantly delayed pyrolysis time. [ABSTRACT FROM AUTHOR]

Sugarcane bagasse is an agro-waste that could replace timber resources for the production of bio-composites. Composite boards such as particleboard offer an issue for the use and recycling of poor quality timber, and these engineered products can overcome some solid wood limitations such as heterogeneity and dimension. Bagasse offers an alternative to wood chips for particleboard production but present some disadvantages as well, such as poor physico-mechanical properties. To address these issues, bagasse fibers were treated with an innovative natural resin formulated with tannin and furfural. Impregnated particles with different concentrations of resin (5%, 10%, and 15% m/m) were exposed to temperatures of 40°C, 60°C, 80°C, and 100°C for resin curing. Various types of tannin-based adhesives, including tannin formaldehyde, tannin/formaldehyde-furfural, and tannin hexamine, were utilized for bonding the treated bagasse particles. The resultant panels were assessed for their physical and mechanical properties and compared to those produced using Melamine-Urea-Formaldehyde (MUF) adhesive. The density of the panels varied from 650 to 730 kg/m3 depending on the resin concentration. The values for both modulus of elasticity and modulus of rupture increased as the resin concentration increased. The internal bonding values exhibited an increase with resin concentration up to a critical point, after which a decreasing trend was observed. The water absorption and thickness swelling were significantly reduced with an increase in resin concentration. However, the panels produced using MUF adhesive yielded the most favorable physico-mechanical properties. Additionally, the panels made with tannin-based adhesives met the minimum requirements specified in the standard EN 312 (specifications for uncoated resin-bonded particleboards) for application in dry conditions. The analysis of formaldehyde emissions indicated that panels produced with tannin-based adhesives exhibited significantly lower emissions compared to those made with MUF. The tannin/furfural resin showed great potential for improving the quality of bagasse particleboard using tannin-based adhesives. [ABSTRACT FROM AUTHOR]

The building and construction sector is the largest emitter of greenhouse gases, accounting for 37% of global emissions. The production and use of materials such as cement, steel, and aluminum contribute significantly to this carbon footprint. Utilizing valorized agricultural by-products, such as hemp shiv and sunflower pith, in construction can enhance the insulating properties of materials and reduce their environmental impact by capturing CO2. Additionally, during the formulation process, molecules such as polyphenols and sugars are released, depending on process parameters like pH and temperature. In some cases, these releases can cause issues, such as delaying the hardening of agro-based concrete or serving as binding agents in binderless particle boards. This study focuses on the molecules released during the processing of these materials, with particular attention to the effects of pH and temperature, and the modifications to the plant particles resulting from these conditions. Physical, chemical, and morphological analyses were conducted on the treated hemp shiv particles (HS1 and HS2). No physical or morphological differences were observed between the samples. However, chemical differences, particularly in the lignin and soluble compound content, were noted and were linked to the release of plant substances during the process. [ABSTRACT FROM AUTHOR]

Particle boards are commonly manufactured from wood-based material bound with a thermosetting adhesive based on the reaction of formaldehyde with phenol, urea, melamine, or co-condensates. The use of formaldehyde is a cause for concern due to its harmful emissions. This study investigates the use of an alternative binder combined with particles derived from a short-cycle crop as an alternative to timber derived particles. A low density particle board was developed using hemp shiv as an aggregate with a binder made with crude glycerol, derived from the waste stream of the bio-diesel industry, esterified with citric acid under heat activation. This board was characterized and found to have good mechanical properties, low thermal conductivity, and good moisture buffering. Dimensional stability was compromised by swelling when exposed to water, but it will be possible to address this shortcoming using hydrophobic additives. The acoustic properties of the board were also found to be excellent, showing potential for use as a thermally insulating acoustic separator for internal walls.

The pulp and paper industry generates vast quantities of paper sludge, posing significant environmental challenges due to its disposal in landfills or incineration. This study explores the potential of valorizing paper sludge by incorporating it into particleboard production. It aims to optimize sludge content and particle size to enhance board properties—a novel approach to waste management in the wood composites industry. Through systematic variation of sludge content (0–25%) and particle size (< 0.5 to > 2 mm), we assessed the mechanical and physical properties such as internal bond strength (IB), modulus of rupture (MOR), modulus of elasticity (MOE), water absorption (WA), and thickness swelling (TS). The findings indicate that incorporating paper sludge at moderate levels (5–15%) with optimized particle sizes (< 1 mm) significantly improves the mechanical properties of the particleboard, including increased IB, MOR, and MOE while reducing WA and TS. Principal Component Analysis (PCA) further supported these results, revealing that higher-density boards with enhanced mechanical properties absorb less water, highlighting the interrelationship between structural integrity and moisture resistance. The PCA also identified thickness swelling as an independent factor, suggesting that while mechanical properties can be optimized, additional strategies are needed to control swelling. In conclusion, this study demonstrates that up to 15% paper sludge can be effectively used in particleboard production without compromising quality, provided particle size is carefully controlled. This approach not only offers a sustainable solution for managing paper sludge but also contributes to the development of eco-friendly composite materials, aligning with circular economy principles. [ABSTRACT FROM AUTHOR]

The paper considers technologies for the synthesis of amino-formaldehyde resins of KF-MT-NP and AFK-10 grades obtained using the peptization procedure, which could result in the complete elimination of vacuum drying and contribute to the ecologization of the process of synthetic resins production. A modifying additive, which is an inorganic polymer (IP) capable of efficient binding of free formaldehyde in the resin and stabilizing its properties by extending its viability to 6–7 months, is used as a peptizer. [ABSTRACT FROM AUTHOR]

Glass fiber‐reinforced polymer (GFRP), extensively employed in diverse industries, generates considerable waste, especially from decommissioned wind turbine blades. Our research group has developed a new method of mechanical recovery for GFRP from wind turbine blades. In this study, waste GFRP was processed into a mixed particle size of 0.9–6 mm using a crusher and a screening machine, and then added as reinforcement materials to particleboards. The effects of different levels of four factors (GFRP addition, hot pressing temperature, hot pressing time, and binder dosage) on the properties of GFRP particleboards were evaluated by orthogonal experiments. The study results showed that the particleboards with 30 wt% GFRP improved modulus of rupture (MOR), modulus of elasticity (MOE), and internal bonding strength (IB) by 74.94%, 42.28%, and 92.05%, respectively, compared to pure poplar particleboards. Moreover, GFRP particleboards demonstrated better water resistance and dimensional stability than commercial particleboards and excelled in thermal stability. Recycling GFRP waste from decommissioned wind turbine blades and incorporating it into particleboard production can reduce environmental pollution, increase the resource recovery utilization rate, and contribute to sustainable manufacturing practices. Highlights: Low‐cost and efficient methods of recycling wind turbine blades were proposed.Recycled GFRP from wind turbine blades can be used as reinforcement for particleboard.The prepared particleboards have excellent physical and mechanical properties and are thermally stable.Determination of the optimal glass fiber‐reinforced polymer addition level in particleboard at 30 wt%. [ABSTRACT FROM AUTHOR]

This research focuses on producing particleboards from the biomass of plantation willow (Salix viminalis L.) and poplar (Populus spp.), aiming to explore their feasibility as sustainable materials for various applications. Fast-growing willow and poplar are known for their rapid growth and suitability for energy production. They present an intriguing alternative as raw materials with added value for particleboard manufacturing. This study investigates the selected mechanical and physical properties of the produced particleboards, considering parameters such as density profile, bending strength, modulus of elasticity, internal bond, water absorption, thickness swelling, and screw withdrawal resistance. The research results were also compared between different mass shares of willow and poplar particles in the particleboards. The results show that the panels produced entirely from the tested alternative raw materials had a modulus of rupture of 21.7 N mm−2 compared to 14.6 N mm−2 for the reference panels, with an internal bond of about 2.02 N mm−2 compared to 0.65 N mm−2 for the reference panels. The thickness swelling after 24 h of soaking was about 24.2% compared to 42.2% for reference panels. The findings underscore the promising potential of willow and poplar-based particleboards as eco-friendly alternatives in the construction and furniture industries, contributing to resource efficiency and carbon emission reduction efforts. [ABSTRACT FROM AUTHOR]

The pyrolysis by‐products of five common wood‐based construction materials (low‐density wood fiberboard, oriented strand board, pine, particle board, and plywood) were studied using pyrolysis‐gas chromatography/mass spectrometry. Samples of wood‐based materials were pyrolyzed under helium from 300 to 800°C to further understand the production of compounds that may become airborne and available for respiratory and dermal exposure. Benzene, toluene, ethylbenzene, p‐xylene, styrene, and naphthalene were specifically targeted since these compounds are common by‐products of pyrolysis. These compounds have been measured in previous live fire scenarios and are associated with human health concerns. The generated pyrolysates were separated and identified with a gas chromatography/mass spectrometry instrument. The results from total ion chromatograms and selected ion monitoring chromatograms were analyzed to compare the abundance of chemicals of interest generated during pyrolysis. Oriented strand board and plywood generated the greatest total concentration of the targeted volatile organic compounds. Plywood and particle boards generated the largest variety in results. Samples from solid pine boards generated the smallest number of volatile compounds, followed by low‐density wood fiberboard that is manufactured with wood fibers, starch, and wax. Notably, pyrolysis by‐products are not the sole compounds generated during the combustion of biomass and these products evolve when they are exposed to the conditions of combustion. Our future work plans to study the combustion by‐products of these materials. [ABSTRACT FROM AUTHOR]

Citric acid can be used as a bio-based binding agent in composites made from lignocellulosic material due to its crosslinking ability with hydroxyl groups via ester formation. Even though plenty of research has investigated diverse manufacturing conditions, with a focus on citric acid content and pressing temperature, an apparent knowledge gap persists regarding their effect on the properties of particleboards made from softwood sawdust. Furthermore, the optimal temperature for particleboards crafted from mostly non-wood lignocellulosic materials was found to be 180–200°C which is lower than that observed for softwood material in a prior study. This study aimed to systematically examine the effects of citric acid content and pressing temperature on particleboards derived from softwood sawdust. Results highlighted a positive correlation of both citric acid content and pressing temperature with mechanical and hygroscopic properties of the particleboards, the best results being achieved at 20 wt% citric acid and 220°C, exhibiting a thickness swelling of 9%, internal bonding strength of 0.77 MPa and a modulus of rupture of 4.3 MPa. This study served as a foundational framework for future investigations into the addition of other chemicals, offering a comprehensive understanding of their interactions with citric acid in particleboard manufacturing. [ABSTRACT FROM AUTHOR]

This study aimed to enhance the physical properties and the weak heat transmission of the core layer, which are the weak points of particleboard produced using melamine-impregnated paper waste (MIPW) as an adhesive. Alkyl-ketene dimer (AKD) and paraffin were used as water-repellent chemicals. MIPW was used as an adhesive, and no additional resin was used. As a result of this study, the samples' physical properties improved with AKD and paraffin's existence. Moreover, it has been approved that AKD is more effective than paraffin in improving the physical properties of the particleboard because AKD improves ester bonding with hydroxyl groups of cellulose fibers. The usage of water repellents resulted in the improvement of internal bond (IB) properties. It was determined that the type and amount of water-repellent chemicals significantly affected the mechanical and physical properties and formaldehyde content of the produced particleboards, except for bending properties. Just the chemical type was found to be significantly effective on bending strength (BS) and modulus of elasticity (MOE) properties. Overall, the study findings suggested that AKD might be successfully utilized as a water-repellent chemical in particleboard manufacturing, while MIPWs used as an adhesive. [ABSTRACT FROM AUTHOR]

It is currently known that in certain circumstances pre-rounding of cutting blades can significantly increase tool life. Despite many data on the beneficial effect of drag-finishing on the durability of metalworking tools, it is not entirely clear whether similar benefits appear when machining wood-based panels. The results of some pilot study are quite promising but the real impact of cutting blades pre-rounding (it is about blades made of various standard cemented carbides), on tool life in particleboard milling are very rarely studied. The study aims to fill this gap in the knowledge system. The experimental research was carried out using a CNC milling machine equipped with a single-blade milling head with replaceable blades. It turned out that the positive effect of the drag-finishing of cutting blades on tool life in particleboard machining depends on the structure and hardness of carbide. A significant extension of the tool life (about 50%) was observed only in the case of particularly hard carbide (2240 HV10). There was no significant advantage for the softer type of carbide (1800 HV10). [ABSTRACT FROM AUTHOR]

Particleboards find extensive application in both civil construction and the furniture industry. Nevertheless, concerns about the interaction of panels with humidity require the exploration of alternative sources to develop a product that meets the requirements for use. This work aims to produce single-layer particleboards with coconut fiber (Cocos nucifera) as substrate, bonded with 10% by mass castor oil-based polyurethane resin (CPUR). Two groups of mixtures were proposed, different from each other in the initial moisture content of the Cocos nucifera particles, ranging from 0 to 2% and from 4% to 6%. For this purpose, density (D), thickness swelling after 24 h (TS), moisture content (MC), and water absorption (WA) were evaluated. The Tukey mean contrast test, at a 5% significance level, was used to verify the influence of the initial moisture content of the particles on the physical properties of the particleboards. The microstructure of the composites was assessed through the utilization of scanning electron microscopy (SEM) technique. The results indicated better compaction of the C. nucifera particles, resulting in fewer voids, contributing to the densification of the panels and, with this, the reduction of water absorption by 15.1%. [ABSTRACT FROM AUTHOR]

The effect of shredded waste office paper was considered when producing one-layered particleboard. Five different mixing ratios of shredded waste office paper/wood particles were used (0/100, 25/75, 50/50, 75/25, and 100/0) and two amounts of urea formaldehyde (UF) resin (10% and 15%). The boards were tested for their physical and mechanical properties, including modulus of elasticity (MOE), bending strength (MOR), and internal bond (IB) strength, in accordance with the European Norm (EN) standards. All properties of the boards were found to be improved via increasing the resin content. The 15% UF-bonded board with 100% wood particles had the highest MOR, whereas the board containing 100% wastepaper for 15% UF had the highest MOE. However, there was no statistical difference between the board types. Although increasing wastepaper content in the board negatively affected the IB, the usage of wastepaper up to 25% was shown to be acceptable as a raw material in the production of particleboard. None of the prepared boards met the EN 312 (1999) requirements for thickness swelling. The boards made from shredded waste office paper were more suitable for dry and indoor use. [ABSTRACT FROM AUTHOR]

Particleboard is a commonly used material in the construction of furniture. It is an engineered wood product made from wood particles, such as wood chips, sawmill shavings, or sawdust, combined with a resin binder and compressed into sheets. The advantages of using this material are its uniformity, stability, and affordable price. Some performance must be tested to ensure its quality and strength properties so that it can be used as a built-in material. This study evaluated deflection performance based on the different thicknesses and sizes. The objective of this study was to determine the deflection properties over time. The deflective capabilities of particleboard with 16, 18 and 25 mm thicknesses and sizes of 400 × 384, 560 × 350, 760 × 330, 800 × 380 and 910 × 390 mm were investigated in three weeks. Remarkably, the particleboard with a 25 mm thickness exhibited markedly diminished deflection two to three times lower than that of 18 mm and 16 mm thickness, thereby showcasing its superior strength when subjected to various loads. Conversely, utilizing longer spans resulted in noteworthy deflection increments, implying that extended spans tend to manifest increased deflection as time progresses. These observations indicate that a thicker and shorter particleboard is well-suited for use as a building material, given its lower deflection over time. In conclusion, this study elucidates the intricate relationship between particleboard characteristics and deflection behavior, providing valuable guidance for selecting suitable particleboards based on load requirements and structural considerations. [ABSTRACT FROM AUTHOR]

Lignin, lignosulfonate, and synthesized phosphorylated lignosulfonate were introduced as green fillers in citric acid-sucrose adhesives for bonding particleboard fabricated from areca leaf sheath (ALS). The characteristics of particleboards were compared to that of ultralow emitting formaldehyde (ULEF-UF). The fillers derived from Eucalyptus spp. kraft-lignin were added for flame retardancy enhancement. 10% of each lignin and modified lignin was added into the ULEF-UF and citric acid-sucrose bonded particleboards. Analyses applied to particleboards included thermal characteristics, X-ray diffraction analysis (XRD), morphological properties, Fourier transform infrared spectroscopy (FTIR), as well as physical, mechanical, and fire resistance characteristics of the laboratory-fabricated particleboards. Lignin and modified lignin resulted in improved thermal stability of the composites bonded with ULEF-UF while the improvement in the particleboard bonded with citric acid-sucrose was not significant. The introduction of filler exerted a higher influence on the UF-bonded particleboards compared to composites fabricated with citric acid-sucrose. Generally, the presence of lignin, lignosulfonate, and phosphorylated lignosulfonate enhanced the mechanical strength of the ULEF-bonded particleboards, although their dimensional stability has deteriorated. Markedly, the use of lignin and lignosulfonate enhanced the fire resistance of the particleboards produced with lower observed weight loss. All laboratory particleboards exhibited satisfactory fire resistance, attaining a V-0 rating in according to the UL-94 standard. [ABSTRACT FROM AUTHOR]

Various methods for the effective modification of urea–formaldehyde (UF) adhesives, aimed at enhancing the performance of wood-based materials, have been continually explored worldwide. The aim of this work was to investigate and evaluate the effect of introducing small amounts (0.25–1.5%) of activated carbon from coconut shells (ACCS) in UF adhesive on the properties of particleboard. The performed investigations of the adhesive mixture's properties showed an increase in both viscosity and reactivity. Moreover, the use of loadings of 0.75% and 1% had a positive effect on mechanical properties such as bending strength, modulus of elasticity, and internal bond. In these variants, a delay in the degradation of the adhesive bonds by water was also observed, as indicated by the lower thickness swelling values measured after 2 h. However, under long-term exposure to water, the modification had no considerable effect on the dimensional stability of the boards. Markedly, the addition of 1 and 1.5% of ACCS resulted in a reduction in formaldehyde content, which can be attributed to the excellent adsorption capacity of activated carbon. Overall, a loading of 1% was found to be optimal, resulting in improved strength, enhanced water resistance, and reduced formaldehyde content. [ABSTRACT FROM AUTHOR]

This study investigated the best mix sawdust, bamboo leaves, and urea formaldehyde to create particleboard by optimizing the mixing ratio. Finding the optimal ratio of sawdust, urea formaldehyde, and bamboo leaves for the binders used in particle board production was the aim of this study. The particle boards' mechanical and physical tests were investigated. The surface morphology of particleboards and its elemental compositions were examined using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS). The result observed from mechanical and physical tests conducted particle boards showed that best particleboard of composition 100 % sawdust, 50 % bamboo leaves and 2.5 g urea had the highest density of 675.643 kg/m3, modulus rupture of 3.84 N/mm2 and modulus elasticity of 2756 N/mm2. The optimal level generated by the experimental design of composition 50 % sawdust, 50 % bamboo leaves and 2.0 g urea were validated. MOR of 13.02 N/mm2 and MOE observed were 881.39 N/mm2. The SEM and EDS results revealed that optimal particleboard of validated experiment had surface with more fibrous network structures than particle board of the best process level. The particleboard that was produced from validated experiment complied with the American National Standard ANSI/A208.1–999.

In this study, under laboratory conditions, hazelnut husk and astragalus plant were mixed separately into black pine wood chips, and multi-purpose boards were produced from the obtained chips with urea formaldehyde glue. After the hazelnut husk and astragalus plant were dried and ground, they were added to the chip and glue mixture in certain proportions. Hazelnut husk mixture ratios were applied as 100 %; 0 %, 75 %; 25 %, 50 %; 50 %, 25 %; 75 %, 0 %; 100 % to black pine wood chip in the particle board mixture. These ratios were made in the same way for the astragalus plant. From these mixtures, chipboard blanks of 16 mm thickness and densities between 0,68 g/cm3 and 0,72 g/cm3 were produced. Density, moisture content, thickness increase, water intake, bending strength, modulus of elasticity in bending and tensile strength perpendicular to the surface were tested in physical and mechanical experiments. According to the results obtained, as the participation rate of hazelnut shells and astragalus increased, the durability properties of the panels decreased. At the same time, it shows that the technological properties of the panels produced by adding up to 25 % astragalus plant and hazelnut shells to the mixture comply with the standards.

Particleboards have gained attention in the global market. Understanding their physical–mechanical behavior in the current technological context is essential due to adhesive polymerization, which depends on variables such as pressing time and temperature. Today, the use of nanoparticles has become a plausible option for improving the properties of polymers used in wood-based composites. This study evaluates the influences of the addition of non-commercial 0.5% aluminum oxide (Al2O3) and aluminum oxide copper (CuO) nanoparticles using a greener route with a lower environmental impact obtaining a urea-formaldehyde (UF)-based polymeric adhesive to manufacture particle composites of Eucalyptus urophylla var. grandis wood. Regarding characterizations, the resin properties analyzed were viscosity, gel time, and pH, as well as panel properties, including density, moisture content, thickness swelling, modulus of elasticity, modulus of rupture, and thermal conductivity. The results were compared with scientific publications and standards. The addition of nanoparticles interfered with viscosity, and all treatments indicated a basic pH. It was not possible to determine the gel time after 10 min. Nanoparticles added to the polymers in the internal layer did not cause an improvement in the swelling properties in terms of thickness, with no significant statistical difference for density and moisture content. The increase from 150 °C to 180 °C may have caused an improvement in all physical–mechanical properties, indicating that the higher temperature positively influenced the polymerization of the formaldehyde-based adhesive. Therefore, the additions of both nanoparticles (0.5% in each condition) led to a limitation in the material influence with respect to physical–mechanical performance. [ABSTRACT FROM AUTHOR]

Repurposing agricultural and forestry by-products not only is beneficial for the environment but also follows the principles of the circular economy. In southeastern Spain, the Canary Island palm tree (Phoenix canariensis W.) is widely used in urban landscapes. Plantations affected by the red weevil, a pest, generate an abundance of plant waste that must be crushed and transferred to authorized landfills. The aim of this study was to manufacture boards using particles from trunks of the Canary Island palm tree without adding any binders in order to obtain an ecological and fire-resistant product. In order to manufacture the boards, three particle sizes (<0.25, 0.25–1, and 1–2 mm), a temperature of 110 °C, a pressure of 2.6 MPa, and a pressing time of 7 min were used. The boards were pressed in a hot plate press for 7 min up to four times (7 min, 7 + 7 min, 7 + 7 + 7 min, and 7 + 7 + 7 + 7 min). The resulting boards showed good thermal performance, and the board´s reaction-to-fire performance was classified as Bd0 (an Fs value of 70.3 mm). This study also showed that boards with a particle size smaller than 0.25 mm that underwent four pressing cycles of 7 min each in the press can be categorized as grade P2 according to the European Standards (MOR of 20 N/mm2, MOE of 2589.8 N/mm2, and IB of 0.74 N/mm2). Therefore, these manufactured particleboards could be used as a flame-retardant material for the interior enclosures of buildings (vertical and horizontal) without the need for coatings. [ABSTRACT FROM AUTHOR]

Under this study, the particle boards of lops and tops of poplar were prepared using urea formaldehyde resin with 110 °C pressing temperature. One set of particle boards was kept as control particle boards, and remaining boards were treated with five different combinations of fire retardant (FR) chemicals at 10% and 20% conc. by dipping method for 15 min and 30 min duration. The prepared control particle boards as well as FR treated boards were tested in accordance with IS 3087, IS 2380 and IS 5509 for their various properties, viz. modulus of rupture (MoR), modulus of elasticity (MoE), internal bond strength (IBS), time taken under rate of burning test (RBT), flammability test (FT) and flame penetration test (FPT). It was found that particle board treated at both concentration (10%, 20%) and both duration (15 min, 30 min) of dipping with all five compositions passed the mechanical test, viz. MoR, MoE and IBS whereas particle board treated at lower concentration (10%) and both duration (15 min, 30 min) of dipping with all five compositions do not pass the FR properties, viz. time taken under RBT, FT and FPT as per relevant IS specifications. The particle board treated at higher concentration (20%) and both duration (15 min, 30 min) of dipping with all five compositions passed the FR properties, viz. time taken under RBT, FT and FPT as per relevant IS specifications. However, at higher concentration (20%) and higher duration (30 min) of dipping the IBS reduces significantly but still all mechanical properties, viz. MoR, MoE and even IBS meet as per relevant IS specifications. [ABSTRACT FROM AUTHOR]

Copyright of Düzce University Journal of Forestry / Düzce Üniversitesi Orman Fakültesi Ormancılık Dergisi is the property of Duzce University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Düzce University Journal of Forestry / Düzce Üniversitesi Orman Fakültesi Ormancılık Dergisi is the property of Duzce University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Currently, the industrial success of bio-based adhesives remains limited, despite the growing interest in these compounds. One example is the use of lignosulfonates (LS), a byproduct from the pulp and paper industry, which requires long pressing times to ensure proper performance for wood-based panel production. This study successfully manufactured particleboards using a low press factor of 7.5 s/mm, commonly used for conventional urea-formaldehyde resins on a lab scale. To the best of our knowledge, lignin-based particleboards have never been reported using such low press factors. Thus, 3-layer boards were manufactured in which the core layer was bonded with polymeric isocyanate (pMDI), and the surface layers were bonded with LS. Propylene carbonate (PC) was used as a solvent for pMDI to improve adhesive distribution. The optimum amounts of adhesive were determined using response surface methodology: 1.3% pMDI with 2.2% PC in the core layer and 15% LS in the surface layers. These boards obeyed the requirements of standard EN 312 for general-purpose boards for use in dry conditions (type P1). Their formaldehyde content, determined through the perforator method, was equal to that of the wood mix at the maximum value set by IKEA for class E0.5. [ABSTRACT FROM AUTHOR]

This study investigates the manufacture of lightweight single-layer particleboard (PB) made of the low-density wood species paulownia (Paulownia tomentosa) using high-frequency (HF) pressing technology. Paulownia round timber was chipped to particles with two different thickness levels (0.35 and 0.53 mm). The particles were classified into fraction B (> 0.5 ≤ 2.00 mm) and C (> 2 ≤ 4 mm) according to the mesh size of the sieve. Next to the particle size the influence of the board density (300 and 400 kg/m³) on the pressing process and the PB properties was analyzed. Using the HF press, PB were produced with a press speed of 6–9 s/mm. With increasing density, the values of the mechanical properties increased. PB made from larger particles showed higher modulus of rupture (MOR), the modulus of elasticity (MOE) and the internal bond strength (IB), but also more affinity to water absorption. PB with a density of 400 kg/m³ met the requirement for lightweight PB type LP2. [ABSTRACT FROM AUTHOR]

Coffee husk (CH) and brewery spent grain (BSG) fibers are sustainable industrial residues that consist of cellulose. The present study aimed at the extraction of cellulose from CH and BSG fibers and to study the effect of alkali-hydrogen peroxide (5% NaOH–7% H2O2) treatment during the extraction by characterizing the extracted cellulose. Characterization of cellulose particles, such as crystallinity, functional groups, thermal properties, and morphology, was conducted by performing X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), and scanning electron microscopy (SEM), respectively. The finding shows that the maximum cellulose yields obtained from CH and BSG fibers are 37.3% and 26.5%, respectively. From the XRD results, the cellulose obtained from CH fiber (C-CH) and from BSG fiber (C-BSG) showed diffractive peaks with the highest intensity of approximately 1,003 and 1,236 counted at 2θ = 22°, respectively. A reduction in the absorption of peaks was observed on the FTIR spectrum for both C-BSG and C-CH samples at different wavelengths. SEM demonstrated that the surface roughness of the celluloses was enhanced. TGA showed that the maximum temperature decomposition observed for both C-CH and C-BSG is 360°C and 380°C, respectively. Generally, in this study, alkali-hydrogen peroxide (5% NaOH–7% H2O2) treatment was effectively used for the treatment of BSG and CH fibers for the extraction and surface modification of cellulose particles. The extracted cellulose in the present study can be used as an alternative to conventional cellulose for the manufacturing of biocomposite materials, preparation of particle boards and furniture, and production of food packaging materials. [ABSTRACT FROM AUTHOR]

Millions of used or worn-out tyres are disposed of by many countries annually. These tyres can be put to good use when recycled. Used tyres are among the most problematic and challenging sources of solid waste, especially in landfills. Therefore, the use of waste tyres for composite materials having desired performance properties can be used as a means of disposing of the tyres. Fibrous material-reinforced composites with enhanced physical and mechanical performance and incorporating sisal fibres were produced using waste tyre material, sisal, and polyester resin. The physical and mechanical properties of hybrid composite board panels, including flexural strength, compression strength, tensile strength, and water absorption, were determined according to ASTM Standards. The rubber tyre particles used in the study had a size of 1.00 mm, and the sisal used had an average length of 6mm. A systematic experimental design was formulated and worked accordingly in the fabrication of the composite. The hybrid composite produced has adequate mechanical properties to perform as a substitute for solid wood in several applications such as tabletops, general purpose, load-bearing boards, ceiling boards, furniture, door panels and partitioning boards. [ABSTRACT FROM AUTHOR]

Recent reports indicate that the development of electricity generation using wind turbines will continue to grow. Despite the long service life of wind turbine blades, their technological life comes to an end at a certain point. Currently, there is no industrial method for recycling them, and the proposed solutions need to consider a complete and comprehensive approach to this material. In many countries, these blades are stored in special landfills and await proposals for rational recycling. It has been proposed that this recyclable yet still troublesome raw material be used in building sheathing boards. Sheathing boards used in the construction industry have a relatively long lifecycle. Three types of polymer chips and two resins, i.e., PF and MUF, were used in the study. The boards' quality was assessed per the standards specified for particle boards. The resulting boards were characterized by strengths above 20 N/mm2 and an elastic modulus close to 4000 N/mm2. Slightly better results were obtained with the MUF resin. [ABSTRACT FROM AUTHOR]

The valorization of bioeconomy by-products holds immense significance in achieving sustainability goals and fostering resource efficiency, not only to reduce the amount of waste generated but also to significantly decrease the carbon footprint associated with several industrial fields, by promoting circular economy. The wine industry is not only one of the major contributors for world’s economy but also a great producer of by-products, with no valorization process associated. Grape stalks are a great source of chemical molecules, as polyphenols, that can be applied in the production of bio-adhesives. In the present work, grape stalk particles were used as raw material to obtain a highly rich extract with bonding properties through solid/liquid extraction. Different extraction agents were tested (water, NaOH, and Na2CO3) at varied concentrations (0.1%, 0.5%, and 1.0%, respectively). Additionally, extracts were chemically characterized, and the bonding capacity was also evaluated. Using NaOH 1.0%, an extraction efficiency of 8.9% and a total content of polyphenols of 1.4% were achieved. Moreover, all extracts presented an interesting bonding capacity (>1.0 MPa) by hot-press at 120°C for 120 s. The composite panel produced using grape stalk adhesive and vine strain particles fulfills the requirements for type P1 particleboards in terms of internal bond strength, reaching 0.66 MPa. The mechanical and wettability properties of composite material allow foreseeing a promising application in the food packaging industry. [ABSTRACT FROM AUTHOR]

There have been beaching events of the marine alga pelagic sargassum in coastal regions of the Caribbean Sea, West African countries, and the north-northeast region of Brazil since 2011. Its presence has caused environmental and socioeconomic impacts while several studies were conducted in order to understand the causes of this phenomenon, as well as alternatives to mitigate its impacts. The objective of this research was to evaluate pelagic sargassum biomass from beaching as a raw material for the manufacture of medium-density multilayer particleboards, aiming for an application that can reduce the impacts generated by the disposal of this seaweed on beaches and landfills. These are composed of 30% sargassum particles in their inner layer and 70% sugarcane bagasse particles on their outer layers, which are bonded with castor-oil-based polyurethane resin. A physical and chemical characterization was carried out in order to evaluate sargassum particles while physical and mechanical tests were carried out in order to evaluate the panels. Results were subsequently compared with indications from different particleboard standards. A life cycle assessment was carried out to complement the feasibility study of these panels and to compare their different manufacturing processes. The multilayer panels met the minimum requirements for physical and mechanical properties established by regulations, indicating that the Sargassum spp. biomass can be used as filling. The life cycle assessment study indicates that sargassum panels produced in the Belém, PA, Brazil, region present lower environmental impacts in four of seven evaluated categories when compared to conventional panels. Given the results obtained, the use of sargassum from beaching events as raw material for panels can be presented as an alternative for reducing social, economic, and environmental impacts in the regions affected by these events. [ABSTRACT FROM AUTHOR]

Ensuring the tightness of buildings using self-adhesive tapes is one of the cost-effective, efficient, and reliable solutions. There is a lack of research, standards, and methodologies for construction adhesive tape, especially for assessing the functional properties of the tape after ageing. The aim of this work is to evaluate the tightness of different building surfaces and adhesive tape systems by conducting artificial ageing. It was found that adhesive tapes with an acrylic adhesive base ensured a fully sealed system. In all cases, tapes applied to surfaces such as plywood, gypsum plasterboard, cement-bonded particle board, plastered cement-bonded particle board, and plastic board provided sufficient sealing. The air permeability of the tapes on the OSB was two to seven times higher than that of the defined sealed system with other surfaces. In most cases, air permeability increased on OSB, gypsum plasterboard, and plastered cement-bonded particle board after ageing. The least problematic surface is the plastic board. In all tested cases, adequate sealing was observed after ageing, with only three of all tested tapes not providing sufficient bonding strength. [ABSTRACT FROM AUTHOR]

Waste management and recycling have led to numerous studies on particleboard production. This study attempted to use milled corncob (MCC) and waste ceramic tiles (WCTs) to produce particleboard. The MCC (100−70 wt.%) and WCT (0–30 wt.%) were mixed at different ratios, mixed and compressed at a pressure of 0.25 MPa using urea formaldehyde (UF) resin as adhesive. The physicomechanical and thermal properties of the particleboards produced were investigated. The physical properties (bulk density, water absorption, and thickness swelling) improved with composite particleboard compared to the 100% MCC particleboard. The increase in WCT yielded improved density and lowered the particleboard's water absorption and thickness swelling. The mechanical tests showed that MOE values were below the recommended standard, which makes them unsuitable for structural use. However, MOR revealed values above the recommended standard. The thermal conductivity of the particleboards was reduced with increased WCT, and the required standard was found to be met. Hence, the particleboards produced are found helpful as thermal wall insulators. Based on the experiments done, sample R7 (70% MCC and 30% WCT) was considered the most preferable since it achieved the most preferable physicomechanical and thermal conductivity performance. The particleboards produced are recommended for wall partitioning and other internal and external purposes. [ABSTRACT FROM AUTHOR]

The shear resistance of a structural particleboard (PB) wall was evaluated as a means to utilize recycled wood and low-grade logs for long periods. The wall was composed of spruce-pine-fir (SPF) lumber, nails, and structural PB, which was developed by improving the water resistance of default PB. Structural PB has a higher density than OSB, which is a commonly used covering material for light wooden structural walls, so a longer end distance for nailing at edge of sheathing is needed for structural PB. In this study, it was confirmed that structural PB walls sufficiently resisted lateral load when the end distance was 15 mm. In this case, the shear strength, shear modulus, and ductility of the structural PB wall for lateral cyclic load were confirmed as 9.2 kN/m, 2.0 kN/mm, and 6.2, respectively. When compared to the design value, the shear strength value was higher than that of the OSB wall and the plywood wall. The shear modulus was lower than that of OSB walls, but higher than plywood walls. Based on the above results, it was considered that structural PB light-frame wall could be used in residential load-bearing applications. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the physical and mechanical properties of particleboards fabricated from Vernonia arborea Buch.-Ham and Eleocharis sp. fibers with PVAc adhesive based on the SNI 03-2105-2006. A two-factor factorial in completely randomized design was used with adhesive contents of 10% and 20% as the first, and ratios of V. arborea Buch.-Ham to Eleocharis sp. of 30/70, 50/50 and 70/30 as the second factor. The materials were V. arborea Buch.-Ham wood shaving (mesh size of 4), Eleocharis sp. (chop length of 1-2cm), and PVAc adhesive. The parameters were moisture content, density, water absorption, and thickness swelling for physical properties, and modulus of elasticity, modulus of rupture, internal bond strength, and screw holding strength for mechanical properties. However, both properties do not meet the SNI 03-2105-2006 (except for thickness swelling), allegedly caused by imprecise concentration and uneven distribution of PVAc. Additionally, 3h boiling of Eleocharis sp. is not able to remove its wax layer, causing less optimal adhesion between materials. Particleboard with 20% PVAc shows the best result. Principally, the adhesive concentration has significant effects, while the combination between V. arborea Buch.- Ham and Eleocharis sp. has insignificant effects on the physical and mechanical properties of particleboards. The evaluated composition is recommended for interior uses (partition walls, wall panels, information boards, and lightweight ceilings), with the addition of coating to improve durability and decorative value. As an additional material, Eleocharis sp. has a high sustainability value due to its availability in nature. [ABSTRACT FROM AUTHOR]