Search

Abstract The development of self-preserving personal care cosmetics represents a significant advancement in the cosmetics industry, offering safer and more natural alternatives to consumers. This study focused on the preparation of such formulations using multifunctional ingredients along with other cosmetic components. Five unique multifunctional ingredients (MFIs) were identified based on their antimicrobial properties: sodium coco PG-dimonium chloride phosphate, ricinoleic acid, palmitoleic acid, raspberry ketone, and sorbitan caprylate. Through meticulous experimentation, 150 combinations of MFIs were prepared and tested to understand their synergistic actions. From these trials, three synergistic antimicrobial compositions were determined: sodium coco PG-dimonium chloride phosphate: ricinoleic acid: raspberry ketone in the ratios 1:6.3:6.3 and 1:6.3:15.7. Sodium coco PG-dimonium chloride phosphate: palmitoleic acid: sorbitan caprylate at a ratio of 1:12.5:37.5. These synergistic compositions exhibited enhanced antimicrobial efficacy compared with their individual components, as evidenced by their lower Minimum Inhibitory Concentration values. Incorporating these formulations into three distinct personal care cosmetic products, including a color protection shampoo, body wash shower gel, and skin-lightening cream, the study further validated their effectiveness. A Preservation Challenge Test study revealed that all three antimicrobial compositions successfully preserved the cosmetic formulations for up to 28 days. This method of product preservation not only ensures consumer safety and stability but also reduces the need for potentially conventional preservatives. In conclusion, the appropriate use of multifunctional ingredients in combination with meticulous formulation techniques has led to the successful development of self-preserving personal care cosmetics. These formulations offer a promising avenue for the cosmetic industry, catering to the rising demand for natural, effective, and consumer-friendly cosmetic products.

ABSTRACT In this study, the thermal and mechanical characteristics of bamboo fiber-reinforced greenpoxy matrix composites were evaluated by varying the fiber loading from 30wt.% to 60wt.% during the compression molding process. The thermal behavior using dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) and their impact and flexural properties of the composites were studied. The results indicate that thermal characterization, the highest peak E’ was observed: B-40 > B-60 > B-30 > B-50, while the peak E’‘ was found to be B-40 > B-30 > B-60 > B-50. The order for tan delta was B-30 > B-40 > B-50 > B-60. The TGA results indicated improved thermal stability with increasing fiber loading, as evidenced by higher residue % and lower weight loss %. Regarding the mechanical properties the impact strength of the composites increased with increasing fiber loading, with the maximum value of 8435.33 J/m2 at 50wt.%. The composite with a 60wt.% fiber loading showed the highest flexural modulus (4.70GPa), while the flexural strength improved at 40wt.%. The SEM analysis of fractured specimens from flexural tests of composite materials with varying fiber volume fractions revealed that an optimal balance between fiber and matrix resin enhanced mechanical properties.

ABSTRACTRice production in sub-Saharan Africa (SSA) has increaed ten-fold since 1961, whereas its consumption has exceeded the production and the regional self-sufficiency rate is only 48% in 2020. Increase in rice production has come mainly from increased harvested area. Yield increase has been limited and the current average yield in SSA is around 2 t ha−1. This paper aims to provide the status quo of (i) current rice production and its challenges, (ii) selected achievements in rice agronomy research mainly by the Africa Rice Center and its partners, and (iii) perspectives for future research on rice agronomy in SSA. The major problems confronting rice production include low yield in rainfed environments, accounting for 70% of the total rice harvested area. Rainfed rice yields are strongly affected by climate extremes such as water stresses, soil-related constraints, and sub-optimum natural resource management and crop management practices by smallholder farmers including poor water management, and suboptimal use of fertilizers, herbicides, and machineries. For alleviating these constraints, a wide range of technologies have been developed and introduced over the last three decades. These include water conservation technologies in rainfed and irrigated lowland rice, site-specific nutrient management practices, decision support tools such as crop growth simulation models, and labor-saving technologies. We conclude that further research efforts are needed to develop locally adapted agronomic solutions for sustainable intensification, especially in rainfed rice to enhance the resilience to climate change and increase land and labor productivity and sustainability of rice cultivation in SSA.

The goal of the research was to assess the recycling potential of waste high-density polyethylene (HDPE) films taken as reinforcement with natural fibers to fabricate decorative tiles with improved mechanical properties. Initially, the density of the composite was determined. Further, hardness, quasi-mechanical and impact properties were evaluated for the HDPE/natural fiber composite samples by testing the composites tensile, flexural loads and impact. In addition, to evaluate the thermal characteristics of the composite, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) study were performed. Water absorption and sound absorption properties were determined for industry specific applications. Scanning Electron Microscopic analysis (SEM) was performed for analyzing the microstructure and also HDPE matrix and natural fibers bonding exists in the composite. The findings confirmed that adding natural fibers to the HDPE matrix impressively increased both tensile and flexural strengths by up to 25%. The impact strength was also enhanced by up to 38%, whereas the hardness and density values remained relatively unchanged. Improved interfacial bonding between the HDPE matrix and natural fibers had been identified by SEM analysis, which was a factor in the composite material's enhanced mechanical characteristics. These findings suggest that waste HDPE films/natural fibers composite can be effectively recycled to fabricate decorative tiles with improved mechanical properties, thereby offering a sustainable and eco-friendly alternative to traditional decorative tile materials.

A novel hybrid material based on 2-hydroxypyridine and selenic acid, abbreviated as [(2-OH-pyH+)]2SeO4, has been synthesized using a slow evaporation method. The compound crystallizes in the centrosymmetric space group C2/c of the monoclinic system. Furthermore, theoretical studies are also performed at the B3LYP/6–31 + G* level to investigate the molecular structure, vibrational spectra, and optical properties of [(2-OH-pyH+)]2SeO4 compound, whereas the TD-DFT calculations are carried out to simulate the HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) on the one hand to achieve the frontier orbital gap and on the other hand to calculate the UV–visible spectrum of the compound in gas phase. In addition, inter and intramolecular charge interactions (NBO) as well as Molecular electrostatic potential (MEP) have also been computed.

The objective of this work is to determine the suitability of olive tree leaves powder (OTL) as reinforcement along with pineapple leaf fibre (PALF) in the epoxy composites. The parent and hybrid composites were fabricated using the hot press technique with the overall fibre loading at 40 wt% and OTL: PALF in the ratio of 50:50, 30:70 and 70:30, respectively. The fabricated composites were characterized using dynamic mechanical analysis (DMA), flexural and impact tests. As the proportion of PALF was increased in the hybrid composites, impact strength improved significantly. However, hybrid composites were not effective in withstanding the bending load where their bending strength and flexural modulus were lower than the parent composites. Hybrid composites outperformed parent composites with superior storage modulus, lower loss modulus and lower damping factor as per the DMA results.

This work explored the importance of quantitative observation through imaging methods of optical and electron microscopies on the mechanical properties of particulate polymeric composites. Egg shell powder (ESP) reinforced polypropylene carbonate (PPC) polymeric composites with different filler weight percentage (wt.%) from 1 to 5 wt.% were considered. A cost-effective Image Analysis Software (IAS) was developed to extract black particles from the original optical images. During this process, the optimal image can be reproduced based on its originality by controlling the threshold values from 0.1 to 0.6 in real time situation. Using one-dimensional (1D) Gaussian distribution analysis, the authentication of the particle distribution data was studied and linked to the tensile strength of the composites. The mean value of the particle area collected from the left and right side of the scattered curves has a significant effect on the tensile strength of the composites. The proposed model was validated by comparing the predicted statistical results with the measured tensile strength for different wt.% of ESP composites. From the results obtained, a close agreement of 99% accuracy was observed between the experimental results and the proposed model for the tensile strength of the composites. The innovative study provides more practical and quantitative knowledge on improved particulate polymeric composites, in addition to the detection of failure processes through optical/electron microscopic examination of images. Evidently, the proposed cost effective, accurate and less stressful model can be employed by several composite-based industries to correlate the tensile strengths of particulate polymeric composites with their morphological properties.

Leptospirosis is a bacterial zoonotic disease that causes abortions, infertility and mastitis in cattle. This research was aimed at investigating the temporal and spatial pattern, sex, age, breed wise distribution of leptospirosis in Tamil Nadu. A seroreactivity of 28.2% was noticed among cattle in seven agro-climatic zones. The temporal trend of leptospirosis recorded during the post-monsoon season (30.5%) was significant when compared to the pre-monsoon season (25.8%). The spatial distribution revealed a high proportion of leptospirosis (31.2%) in the North East zone in comparison with the other zones. The serogroups Australis (37.9%), Hebdomadis (30.6%), Hardjo (29.9%), Javanica (28.1%) and Pomona (19.7%) were predominant in all the agro-climatic zones. The observation of 44.2% seroreactivity in buffaloes is most probably associated with the wallowing behaviour. A high seroreactivity of 31.1% in Holstein Friesian than that compared with the native breed discloses a breed susceptibility. A seroreactivity of 30.2% in animals aged above three years shows an age-related susceptibility, but there was no significant difference between the sexes. The seroreactivity among the animals in an organised farm (33.8%) is higher than in individually reared animals (25.5%) indicating the impact of the rearing system. The three Leptospira strains isolated were identified as the Leptospira interrogans serogroup Australis, Canicola and Sejroe. This study depicted the epidemiology of leptospirosis in cattle and emphasises the need of leptospirosis to be included in cattle health surveillance programmes.

Bovine leptospirosis causes jaundice, mastitis, infertility, abortion, and death of infected animals. This research aimed to study the status of urinary shedders of pathogenic Leptospira among the cattle population and identify the infecting serogroup circulating in the state of Tamil Nadu (India). A total of 305 blood and 305 urine samples were collected from organized farms (n = 44), individually housed animals (n = 81) and animals from the slaughterhouse (n = 180). Microscopic agglutination test was carried out to detect anti‑leptospiral antibodies. Dark‑field microscopic examination and culture of urine were done to detect and isolate the Leptospira. The isolated Leptospira were identified by cross‑agglutination test and gene sequencing. PCR and real‑time PCR were carried out to detect leptospiral genomic DNA in urine samples to detect the shedders. The anti‑leptospiral antibodies were detected in 6.2% of animals. The Leptospira genomic DNA was detected in 9.2% (28/305) of urine samples. Of the 28 Leptospira positive urine samples, 39.2% were from animals with clinical signs suggestive of leptospirosis and 60.8% Leptospira positive samples were from slaughterhouse animals. The Leptospira isolated were identified as Leptospira interrogans serogroup Sejroe and Hebdomadis. The present study demonstrates the need to include leptospirosis in cattle health surveillance programmes to prevent leptospirosis and renal carriage by vaccination.

Thermal expansion and viscoelastic properties of the date palm fibre (DPF)/epoxy composites were influenced by the type of filler from different parts of the date palm tree. The variation in properties is mainly due to the difference in fibre composition between the DPF from leaf stalk, leaf sheath, fruit bunch stalk, and tree trunk. Among the investigated composites, composite reinforced with the tree trunk fibre displayed higher thermal stability as visible from the lower weight loss, higher onset and inflection temperatures and maximum residue % from the thermogravimetric analysis (TGA). Lower coefficient of linear thermal expansion (CLTE) obtained from thermomechanical analysis (TMA) further provided supportive evidence for dimensional stability at elevated temperature. Based on the dynamic mechanical analysis (DMA) results, the DPF/epoxy composites with fruit bunch stalk fillers displayed a better property by showing higher storage modulus and lesser tan delta values. Hence, composite from the tree trunk and fruit bunch stalk fibres of date palm is recommended for applications requiring superior thermal resistance.

Single crystals of benzil commonly known as 1,2-diphenylethane-1,2-dione are grown by the slow evaporation method at room temperature. Gaussian 09 program is applied for theoretical calculations with B3LYP/6-311++G(d,p) basis set. The structure is optimized, and the energy, structural parameters, vibrational frequencies, IR, and Raman intensities are determined. Complete natural bonding orbital (NBO) analysis is carried out to analyze the intramolecular electronic interactions and their stabilization energies. From the second-order perturbation theory analysis of the benzil molecule, it is observed that there exists a hyperconjugative intramolecular stabilization energy between 17.45 and 22.76 KJmol-1. HOMO-LUMO analysis has been performed to identify the charges transferred within the molecule. The energy gap is calculated to be 2.919 eV and thus establishes the soft nature of the molecule. The molecular electrostatic potential (MEP) of the grown crystal was analyzed using the B3LYP method with 6-311++G(d,p) basis set. First-order hyperpolarizability calculations reveal the nonlinear optical microscopic behavior of the benzil molecule with nonzero values. The total value of the first-order hyperpolarizability (βtot) is of the order of 41.5246×10−31 esu, which is found to be 11.135 times that of urea. Hence, benzil can be referred to as a good material for nonlinear optical applications.

Plastics play a significant part in human life and the world we live in. The use of plastics results in detrimental effects on the natural world, which compels us to look for viable replacements. As a result of their enhanced capacity to biodegrade, bioplastics are becoming increasingly important materials. In recent years, there has been a rapid ascent in the utilization of biopolymers in various applications. The objective of this research is to investigate the impact that silica obtained from rice hull ash (RHA) and microcrystalline cellulose (MCC) obtained from groundnut husk have on the properties of bioplastic obtained from wheat gluten and fish scales. The usage of fish scales has been shown to have a positive effect on weight reduction and debasement rates. Microcrystalline cellulose (MCC) is utilized in a wide range of concentrations, and the influence of MCC on bioplastic is researched. The biodegradability tests of bioplastic revealed that the plastic lost 35% of its weight in just 14 days. The experiments that were done to evaluate the chemical stability and tensile strength of the bioplastic indicated that the MCC content has a significant effect in improving the characteristics of the material.

Aim: The aim of this work was to study the tolerance level of farmers toward different human-wildlife conflict (HWC) situations. Materials and Methods: This study was conducted in 24 villages of nine blocks from Kancheepuram, Coimbatore, Erode, and Krishnagiri districts of Tamil Nadu by personally interviewing 240 farmers affected with four different HWC situations such as human-elephant conflict (HEC), human-wild pig conflict (HPC), human-gaur conflict (HGC), and human-monkey conflict (HMC). A scale developed for this purpose was used to find out the tolerance level of the farmers. Results: In general, the majority (61.70%) of the farmers had medium level of tolerance toward HWC, whereas 25.40% and 12.90% belonged to a high and low category, respectively. The mean tolerance level of the farmer’s encountering HMC is low (8.77) among the other three wild animal conflicts. In tackling HWC, the majority (55.00%) of the HEC farmers drove the elephant once it entered into their farmland. In the HPC, more than three-fourths of the respondents drove away the wild pig once they were found in farmlands. With regard to the HMC, a less number of them (1.70%) drove the monkey away if monkeys were spotted in their village. With regard to HGC, 95.00% of the respondents frightened the gaurs if their family members were threatened by gaurs. Conclusion: The present study suggests that that majority of the farmers had medium level of tolerance toward HWC. The tolerance level of the HMC farmers was lower than other three HWC affected farmers. This study emphasizes the need for necessary training to tackle the problem in an effective manner for wild animal conservation.

In this study, we intend to estimate the effects of normal tissue sparing between intensity modulated radiotherapy (IMRT) treatment plans generated with and without a dose volume (DV)-based physical cost function using equivalent uniform dose (EUD). Twenty prostate cancer patients were retrospectively selected for this study. For each patient, two IMRT plans were generated (i) EUD-based optimization with a DV-based physical cost function to control inhomogeneity (EUDWith DV) and (ii) EUD-based optimization without a DV-based physical cost function to allow inhomogeneity (EUDWithout DV). The generated plans were prescribed a dose of 72 Gy in 36 fractions to planning target volume (PTV). Mean dose, D30%, and D5%were evaluated for all organ at risk (OAR). Normal tissue complication probability was also calculated for all OARs using BioSuite software. The average volume of PTV for all patients was 103.02 ± 27 cm3. The PTV mean dose for EUDWith DVplans was 73.67 ± 1.7 Gy, whereas for EUDWithout DVplans was 80.42 ± 2.7 Gy. It was found that PTV volume receiving dose more than 115% of prescription dose was negligible in EUDWith DV plans, whereas it was 28% in EUDWithout DV plans. In almost all dosimetric parameters evaluated, dose to OARs in EUDWith DVplans was higher than in EUDWithout DVplans. Allowing inhomogeneous dose (EUDWithout DV) inside the target would achieve better normal tissue sparing compared to homogenous dose distribution (EUDWith DV). Hence, this inhomogeneous dose could be intentionally dumped on the high-risk volume to achieve high local control. Therefore, it was concluded that EUD optimized plans offer added advantage of less OAR dose as well as selectively boosting dose to gross tumor volume.