Search

Background: Patients are at risk of nosocomial COVID-19 infection. The role of accompanying persons/visitors as potential infection donors is not yet well researched, but the risk will be influenced by prevention measures recommended by infection control practitioners.Aim: To collect information about COVID-19 infection control strategies for patients and accompanying persons from infection control practitioners in German hospitals.Methods: A cross-sectional questionnaire was developed, ethically approved, pre-tested and formatted as an online tool. Infection control practitioners in 987 randomly selected German hospitals were invited to participate in March and April 2021. For statistical analysis, the hospitals were categorized as small (0-499 beds) or large (≥500 beds).Findings: One hundred surveys were completed (response rate: 10%). A higher proportion of large (71%) than small (49%) hospitals let patients decide freely whether to wear medical or FFP2 masks. Most hospitals reported spatial separation for COVID-19 patients and non-COVID-19 cases (38%) or additionally for suspected COVID-19 cases (53%). A separation of healthcare teams for these areas existed in 54% of the hospitals. Accompaniment bans were more prevalent in large (52%) than in small hospitals (29%), but large hospitals granted more exemptions.Conclusion: The decision as to whether to separate areas and teams seemed to depend on the hospital's structural conditions, therefore impairing the implementation of recommendations. Accompaniment regulations differ between hospital sizes and may depend on patient numbers, case type/severity and patients' requirements. In the dynamic situation of a pandemic, it can be difficult to stay up to date with findings and recommendations on infection control. [ABSTRACT FROM AUTHOR]

Artificial intelligence (AI) is increasingly prevalent in biomedical and industrial development, capturing the interest of dental professionals and patients. Its potential to improve the accuracy and speed of dental procedures is set to revolutionize dental care. The use of AI in computer-aided design/computer-aided manufacturing (CAD/CAM) within the restorative dental and material science fields offers numerous benefits, providing a new dimension to these practices. This study aims to provide a concise overview of the implementation of AI-powered technologies in CAD/CAM restorative dental procedures and materials. A comprehensive literature search was conducted using keywords from 2000 to 2023 to obtain pertinent information. This method was implemented to guarantee a thorough investigation of the subject matter. Keywords included; "Artificial Intelligence", "Machine Learning", "Neural Networks", "Virtual Reality", "Digital Dentistry", "CAD/CAM", and "Restorative Dentistry". Artificial intelligence in digital restorative dentistry has proven to be highly beneficial in various dental CAD/CAM applications. It helps in automating and incorporating esthetic factors, occlusal schemes, and previous practitioners' CAD choices in fabricating dental restorations. AI can also predict the debonding risk of CAD/CAM restorations and the compositional effects on the mechanical properties of its materials. Continuous enhancements are being made to overcome its limitations and open new possibilities for future developments in this field., Competing Interests: The authors declare that they have no competing interests., (© 2024 Yeslam et al.)

Children's sedentary time has increased, while daily physical activity and motor performance have decreased. We evaluated an integrated school-based exercise program by assessing changes in motor skills after one year and comparing these changes to children who did not participate. We included 303 children from five schools in this longitudinal study and assigned them either to the exercise group (EG; n = 183 with daily exercise program) or the waiting group (WG; n = 120). Motor skills were assessed at baseline and after one year. Mixed modeling was used to analyze inter-group differences of change in motor skills and to determine the effect of sex, age group, and weight status. EG improved more strongly than WG for sprint, side jumps (both p = 0.017), stand and reach ( p = 0.012), and ergometry ( p ≤ 0.001) when compared to WG. Girls improved more strongly in the sit-ups than boys, second graders more than fifth graders in the backwards balance and the ergometry, and non-overweight children more in the standing long jump than overweight children. The exercise program is effective in increasing motor skills and physical fitness. Girls were not disadvantaged, and overweight children profited as much as their non-overweight peers in all categories but one.

Background: Healthcare workers (HCW) are at risk of getting infected with COVID-19 at work. To prevent such incidents and provide a safe environment in hospitals, comprehensive infection control strategies are necessary. We aimed to collect information on COVID-19 infection control strategies regarding personal protective equipment (PPE), regulations during breaks for HCW and dissemination of pandemic-related information., Methods: We invited infection control practitioners from 987 randomly selected German hospitals in March-April 2021 to participate in our cross-sectional online survey. We categorized the hospital based on bed capacity (≤499 beds = small; ≥500 beds = large). Fisher's exact test was performed and p  < 0.05 defined as statistically significant., Findings: 100 participants completed the questionnaire. Small hospitals were more directive about requiring FFP2 respirators (63%), whereas larger hospitals more often gave their HCW a choice between these and medical masks (67%). For the care of COVID-19 and suspected COVID-19 cases, >90% of the participants recommended the use of gloves. Notably, gloves were recommended beyond COVID-19 in 30% of the hospitals. During meal breaks various strategies were followed., Conclusion: Recommendations for PPE varied across hospital sizes, which could be due to different assessments of necessity and safety. Regulations during breaks varied strongly which illustrates the need for clear official guidelines., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 Published by Elsevier Ltd.)

Background: Two-part abutments are typically made up of a base composed of titanium and a ceramic build-up. The long-term outcomes are affected by the mechanical durability. The purpose of the present investigation was to evaluate and compare the retention force of two-part abutment systems with titanium or titanium nitride bases-as fixed with zirconia components and with various surface treatments., Methods: A total of 60 two-part abutments were investigated-with a titanium base (n = 30) or titanium nitride coated bases (n = 30) and bonded with zirconia ceramic build-ups. The bonding surfaces were treated with aluminium oxide blasting, with an average particle size of 110 µm. The titanium bases were then pretreated with Alloy Primer or Clearfil Ceramic Primer. The ceramic build-ups were only treated with Clearfil Ceramic Primer. For twenty test specimens, no chemical pretreatment was performed. Test specimens were classified into six groups in accordance with the pretreatment (A-F; n = 10). A resin-based luting agent was employed to attach the two parts. Specimens were then subjected to artificial thermal aging (10 4 cycles with 5 °C/55 °C). The retention force between the two parts was then investigated with a pull-off test. The findings were analyzed by ANOVA statistics. Fracture patterns were examined by electron microscopy., Results: In the absence of primer, titanium nitride coated bases gave significantly greater retention forces than other samples (p < 0.05). Chemical preconditioning with silane coupling agents did not effect on the retention force of coated bases., Conclusions: The results of the current study suggested that modifying metal surfaces by coating the base with titanium nitride not only has esthetic and biological advantages, but also enhances the mechanical properties of the adhesive bond of two-part abutments.

Purpose: If bacteria penetrate through the implant-abutment connection, they may initiate inflammatory reactions in the peri-implant tissue. It seems that the type of connection plays a key role in the development of peri-implantitis. The aim of the present in vitro study was to compare the microleakage of implant-supported fixed complete arch bridges at the levels of abutment and implant., Methods: Ten identical polyurethane model bases containing six implants each were produced using an edentulous model of the upper jaw. These models were prepared with two types of implant-supported complete arch prostheses. Five specimens were fixed at implant level and five at abutment level. The inner parts implants were inoculated with Escherichia coli (E.coli). Each implant was surrounded with closed bacteria-proof vessels to observe bacterial migration from the inner parts of implants to the nutrient solution. Samples of nutrient solution were taken at different time points up to 2 to 10 days and colony forming units were determined., Results: The bacterial accumulation in the implant-supported bridges at the implant level was significantly lower than at the abutment-level (p=0.00953)., Conclusion: For implant-supported fixed complete arch prostheses, bacterial accumulation was lower at the implant level than at the abutment-level., (Copyright© 2021 Dennis Barber Ltd.)

Objectives: The aim of this study was to evaluate volume, vitality and diversity of biofilms on the abutment materials zirconia and titanium as a function of time using an in vivo model for the biofilm formation., Materials and Methods: The development of biofilms on zirconia and titanium grade 4 test specimens in the human oral cavity over time was analysed. After pretreatment, a total of 96 titanium and 96 zirconia discs were fixed on 12 composite splints, which were worn by 12 volunteers. After 6 hr, 24 hr, 3 days and 5 days, biofilms on 48 specimens of each material were analysed with confocal laser scanning microscopy (CLSM). The microbiota composition on the other 48 test specimens was examined using full-length 16S sequence analysis. Statistical analysis was performed by SPSS and R, and level of significance was set at 0.05., Results: Confocal laser scanning microscopy analysis of the biofilms revealed significant changes in volume over time on zirconia and titanium. The material did not significantly influence the volume or live/dead ratio at the individual time points. The composition of the microbiome was influenced by the age of the biofilm, but not by the material of the test specimen. The most frequently found bacteria were Streptococcus spp., followed by Neisseria spp., Rothia spp., Haemophilus spp., Gemella spp. and Abiotrophia spp., Conclusions: On both materials, the quantity and diversity of the microbiome increased over time. Apart from a slight difference in Veillonella abundance at one time point, there were no significant differences between zirconia and titanium., (© 2020 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Purpose: The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested., Materials and Methods: A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group&#95;cer&#95;sin) or rigid alloy (Tizian NEM-group&#95;ti&#95;nem), selective laser melting (Ceramill NPL-group&#95;cer&#95;npl), and casting (Girobond NB-group&#95;gir&#95;nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05)., Results: Mean absolute marginal discrepancy ranged between 20 µm (group&#95;cer&#95;npl for specimens of Ceramill NPL) and 43 µm (group&#95;cer&#95;sin for crowns of Ceramill Sintron) with the oxide layer and between 19 µm and 28 µm without the oxide layer. The internal gap varied between 33 µm (group&#95;ti&#95;nem for test samples of Tizian NEM) and 75 µm (group&#95;gir&#95;nb for the base material Girobond NB) with the oxide layer and between 30 µm and 76 µm without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used ( P <.05)., Conclusion: Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work., (© 2020 The Korean Academy of Prosthodontics.)

Objectives: The knowledge about the influence of dental treatment on health-related quality of life (HRQoL) is still limited. The aim of this multicenter randomized controlled clinical trial was to assess the effect of stabilizing an existing complete denture, by means of a single mandibular implant, on HRQoL. Furthermore, the impact of the loading protocol, i.e., immediate or delayed loading, in edentulous patients was evaluated., Methods: One hundred fifty-eight participants aged 60-89 years were randomly assigned to study group A (immediate loading; n = 81) and to group B (delayed loading; n = 78). All participants received a single midline implant in the mandible. The implants were either immediately loaded (group A) or after a closed healing period of 3 months (group B) by connecting the existing mandibular complete dentures to ball attachments. HRQoL was assessed with the Short Form-36 questionnaire of health (SF-36) at baseline, 4 months, and 24 months after implant loading., Results: Improvement of HRQoL by means of a single implant-retained mandibular overdenture could not be demonstrated after 4 and 24 months of implant loading. Furthermore, the application of two different loading protocols did not influence HRQoL ratings of study participants., Conclusion: The loading protocol is not a factor, influencing HRQoL in patients treated by a single midline implant in the edentulous mandible., Clinical Relevance: A single midline implant in the edentulous mandible, stabilizing a mandibular complete denture, cannot be recommended for improving HRQoL.

Objectives: Two-part abutments consist of titanium base and ceramic coping. Their long-term success is largely determined by the mechanical stability. The aim of the present study was to investigate the retention forces of two-part implant abutments. The study included zirconia and lithium disilicate ceramics copings, with different surface treatments and resin-based luting agents., Material and Methods: The analysis of retention forces was based on a total of 70 test specimens. Seven surface modifications and three resin-based luting agents were employed for the bonding of components in the seven groups (n = 70). All surfaces of titanium bases-except for a control-were pretreated with aluminum oxide blasting, either alone or in combination with surface activating primers. Surfaces of ceramic copings were also treated mechanically by sandblasting, either alone or with acid etching or different primers. All specimens underwent thermal aging (10 4 cycles, 5°C/55°C). The retention forces between the two parts were measured with a pull-off test. The results were analyzed by two-way ANOVA statistics. Fracture patterns were evaluated by light and scanning electron microscopy., Results: No mechanical pretreatment of the titanium (group 2) base resulted in the lowest retention. The combination with Monobond plus leads to the highest pull-off forces for both ceramic materials., Conclusions: Surface modifications and resin-based agents influence the retention of components of two-part abutments. Lithium disilicate ceramic copings reached comparable results of retention to the typically used zirconia copings., (© 2019 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Background: Over the years, there has been a strong consensus in dentistry that at least two implants are required to retain a complete mandibular denture. It has been shown in several clinical trials that one single median implant can retain a mandibular overdenture sufficiently well for up to 5 years without implant failures, when delayed loading was used. However, other trials have reported conflicting results with in part considerable failure rates when immediate loading was applied. Therefore it is the purpose of the current randomized clinical trial to test the hypothesis that immediate loading of a single mandibular midline implant with an overdenture will result in a comparable clinical outcome as using the standard protocol of delayed loading., Methods/design: This prospective nine-center randomized controlled clinical trial is still ongoing. The final patient will complete the trial in 2016. In total, 180 edentulous patients between 60 and 89 years with sufficient complete dentures will receive one median implant in the edentulous mandible, which will retain the existing complete denture using a ball attachment. Loading of the median implant is either immediately after implant placement (experimental group) or delayed by 3 months of submerged healing at second-stage surgery (control group). Follow-up of patients will be performed for 24 months after implant loading. The primary outcome measure is non-inferiority of implant success rate of the experimental group compared to the control group. The secondary outcome measures encompass clinical, technical and subjective variables. The study was funded by the Deutsche Forschungsgemeinschaft (German research foundation, KE 477/8-1)., Discussion: This multi-center clinical trial will give information on the ability of a single median implant to retain a complete mandibular denture when immediately loaded. If viable, this treatment option will strongly improve everyday dental practice., Trial Registration: The trial has been registered at Deutsches Register Klinischer Studien (German register of clinical trials) under DRKS-ID: DRKS00003730 since 23 August 2012. (http://www.germanctr.de).

The aim of this study was to investigate how changes in the thermal characteristics of veneer ceramics with almost identical chemical and mechanical properties but with different coefficients of thermal expansion (CTE) can modify their interfacial adhesion to zirconia. 48 bilayers made of one Y-TZP ceramic and four veneer ceramics were fabricated (n=12). Thermal residual stresses were calculated on the basis of the CTE and glass transition temperatures. After defined notching all specimens were loaded in a four-point bending test and the critical loads were recorded which induced stable crack extension at the adhesion interface. The strain energy release rate (G, J/m(2)) was calculated and was taken as a measure of interfacial adhesion. The CTE of the veneer ceramics were significantly correlated with their adhesion to Y-TZP (p<0.001). Interfacial adhesion in zirconia/veneer bilayers is predominantly affected by the thermal characteristics of the veneer ceramic.

A large proportion of infection-causing isolates of the yeast Candida albicans belong to a general-purpose genotype, identifiable by fingerprinting with the moderately repetitive sequence Ca3. The high prevalence of this group -- up to 70% in some patient categories -- suggests that its members possess genetic determinants, which enhance their success as pathogens compared to other strains. To find such determinants we are comparing the genomes of representatives of the general-purpose genotype cluster with the genomes of other strains. In this paper we describe the identification of a 985 bp HpaII fragment (MU13-4) specific to general-purpose genotype strains. The fragment was present in 90% of these strains, but only in 10% of other strains. The fragment did not hybridize with probe Ca3, used to define the general-purpose cluster. It contains elevated levels of repetitive DNA. Sequences homologous to MU13-4 are dispersed throughout the chromosomes of general-purpose strains but are rarer or absent in other strains, as judged by Southern hybridization. Using the Stanford C. albicans genome database, we have placed the MU13-4 fragment next to a CARE-1 element. We also found 79 significant homologies between parts of MU13-4 and 19 other contigs. Attempts to amplify the region surrounding the polymorphic fragment in non-general-purpose genotype strains suggest, as do the hybridization data, that the polymorphism is created by a deletion in non-cluster strains. These results show that it is possible to identify polymorphisms specific to general-purpose genotype strains. Primers against the fragment will allow PCR-based discrimination between general-purpose genotype strains and other strains, facilitating investigations aimed at determining morbidity and mortality caused by general-purpose genotype strains compared to other strains.