Search

Scalable and high-throughput electrophysiological measurement systems are necessary to accelerate the elucidation of cardiac diseases in drug development. Optical mapping is the primary method of simultaneously measuring several key electrophysiological parameters, such as action potentials, intracellular free calcium and conduction velocity, at high spatiotemporal resolution. This tool has been applied to isolated whole-hearts, whole-hearts in-vivo, tissue-slices and cardiac monolayers/tissue-constructs. Although optical mapping of all of these substrates have contributed to our understanding of ion-channels and fibrillation dynamics, cardiac monolayers/tissue-constructs are scalable macroscopic substrates that are particularly amenable to high-throughput interrogation. Here, we describe and validate a scalable and fully-automated monolayer optical mapping robot that requires no human intervention and with reasonable costs. As a proof-of-principle demonstration, we performed parallelized macroscopic optical mapping of calcium dynamics in the well-established neonatal-rat-ventricular-myocyte monolayer plated on standard 35 mm dishes. Given the advancements in regenerative and personalized medicine, we also performed parallelized macroscopic optical mapping of voltage dynamics in human pluripotent stem cell-derived cardiomyocyte monolayers using a genetically encoded voltage indictor and a commonly-used voltage sensitive dye to demonstrate the versatility of our system.

Abstract Background In cell biology, increasing focus has been directed to fast events at subcellular space with the advent of fluorescent probes. As an example, voltage sensitive dyes (VSD) have been used to measure membrane potentials. Yet, even the most recently developed genetically encoded voltage sensors have demanded exhausting signal averaging through repeated experiments to quantify action potentials (AP). This analysis may be further hampered in subcellular signals defined by small regions of interest (ROI), where signal-to-noise ratio (SNR) may fall substantially. Signal processing techniques like blind source separation (BSS) are designed to separate a multichannel mixture of signals into uncorrelated or independent sources, whose potential to separate ROI signal from noise has been poorly explored. Our aims are to develop a method capable of retrieving subcellular events with minimal a priori information from noisy cell fluorescence images and to provide it as a computational tool to be readily employed by the scientific community. Results In this paper, we have developed METROID (Morphological Extraction of Transmembrane potential from Regions Of Interest Device), a new computational tool to filter fluorescence signals from multiple ROIs, whose code and graphical interface are freely available. In this tool, we developed a new ROI definition procedure to automatically generate similar-area ROIs that follow cell shape. In addition, simulations and real data analysis were performed to recover AP and electroporation signals contaminated by noise by means of four types of BSS: Principal Component Analysis (PCA), Independent Component Analysis (ICA), and two versions with discrete wavelet transform (DWT). All these strategies allowed for signal extraction at low SNR (− 10 dB) without apparent signal distortion. Conclusions We demonstrate the great capability of our method to filter subcellular signals from noisy fluorescence images in a single trial, avoiding repeated experiments. We provide this novel biomedical application with a graphical user interface at https://doi.org/10.6084/m9.figshare.11344046.v1 , and its code and datasets are available in GitHub at https://github.com/zoccoler/metroid .

Clinicians, biologists, physicists, engineers, and computer scientists are coming together to better understand heart disease, which is currently the leading cause of death globally. Optical mapping, a high-speed fluorescence imaging technique that visualizes and measures key cardiac parameters such as action potentials, cytosolic calcium transients, and fibrillation dynamics, is a core research tool that has arisen from such interdisciplinary collaborations. In an effort to broaden its use, especially among clinical scientists and students, we developed a complete and low-cost optical mapping system, including a constant-flow Langendorff perfusion system, which minimizes the economic threshold to widespread use of this powerful tool in cardiac electrophysiology research. The system described here provides high spatiotemporal resolution data about action potentials, intracellular calcium transients and fibrillation wave dynamics in isolated Langendorff-perfused hearts (pigs and rabbits), relevant for translational research. All system components and software elements are fully disclosed with the aim of increasing the use of this affordable and highly versatile tool among clinicians, basic scientists and students wishing to tackle their own research questions with their own customizable systems.

Clinicians, biologists, physicists, engineers, and computer scientists are coming together to better understand heart disease, which is currently the leading cause of death globally. Optical mapping, a high-speed fluorescence imaging technique that visualizes and measures key cardiac parameters such as action potentials, cytosolic calcium transients, and fibrillation dynamics, is a core research tool that has arisen from such interdisciplinary collaborations. In an effort to broaden its use, especially among clinical scientists and students, we developed a complete and low-cost optical mapping system, including a constant-flow Langendorff perfusion system, which minimizes the economic threshold to widespread use of this powerful tool in cardiac electrophysiology research. The system described here provides high spatiotemporal resolution data about action potentials, intracellular calcium transients and fibrillation wave dynamics in isolated Langendorff-perfused hearts (pigs and rabbits), relevant for translational research. All system components and software elements are fully disclosed with the aim of increasing the use of this affordable and highly versatile tool among clinicians, basic scientists and students wishing to tackle their own research questions with their own customizable systems. [ABSTRACT FROM AUTHOR]

Two-photon excitation of voltage sensitive dyes (VSDs) can measure rapidly changing electrophysiological signals deep within intact cardiac tissue with improved three-dimensional resolution along with reduced photobleaching and photo-toxicity compared to conventional confocal microscopy. Recently, a category of VSDs has emerged which records membrane potentials by photo-induced electron transfer. FluoVolt is a novel VSD in this category which promises fast response and a 25% fractional change in fluorescence per 100 mV, making it an attractive optical probe for action potential (AP) recordings within intact cardiac tissue. The purpose of this study was to characterize the fluorescent properties of FluoVolt as well as its utility for deep tissue imaging. Discrete tissue layers throughout the left ventricular wall of isolated perfused murine hearts loaded with FluoVolt or di-4-ANEPPS were sequentially excited with two-photon microscopy. FluoVolt loaded hearts suffered significantly fewer episodes of atrio-ventricular block compared to di-4-ANEPPS loaded hearts, indicating comparatively low toxicity of FluoVolt in the intact heart. APs recorded with FluoVolt were characterized by a lower signal-to-noise ratio and a higher dynamic range compared to APs recorded with di-4-ANEPPS. Although both depolarization and repolarization parameters were similar in APs recorded with either dye, FluoVolt allowed deeper tissue excitation with improved three-dimensional resolution due to reduced out-of-focus fluorescence generation under two-photon excitation. Our results demonstrate several advantages of two-photon excitation of FluoVolt in functional studies in intact heart preparations, including reduced toxicity and improved fluorescent properties. [ABSTRACT FROM AUTHOR]

Background: In cell biology, increasing focus has been directed to fast events at subcellular space with the advent of fluorescent probes. As an example, voltage sensitive dyes (VSD) have been used to measure membrane potentials. Yet, even the most recently developed genetically encoded voltage sensors have demanded exhausting signal averaging through repeated experiments to quantify action potentials (AP). This analysis may be further hampered in subcellular signals defined by small regions of interest (ROI), where signal-to-noise ratio (SNR) may fall substantially. Signal processing techniques like blind source separation (BSS) are designed to separate a multichannel mixture of signals into uncorrelated or independent sources, whose potential to separate ROI signal from noise has been poorly explored. Our aims are to develop a method capable of retrieving subcellular events with minimal a priori information from noisy cell fluorescence images and to provide it as a computational tool to be readily employed by the scientific community. Results: In this paper, we have developed METROID (Morphological Extraction of Transmembrane potential from Regions Of Interest Device), a new computational tool to filter fluorescence signals from multiple ROIs, whose code and graphical interface are freely available. In this tool, we developed a new ROI definition procedure to automatically generate similar-area ROIs that follow cell shape. In addition, simulations and real data analysis were performed to recover AP and electroporation signals contaminated by noise by means of four types of BSS: Principal Component Analysis (PCA), Independent Component Analysis (ICA), and two versions with discrete wavelet transform (DWT). All these strategies allowed for signal extraction at low SNR (− 10 dB) without apparent signal distortion. Conclusions: We demonstrate the great capability of our method to filter subcellular signals from noisy fluorescence images in a single trial, avoiding repeated experiments. We provide this novel biomedical application with a graphical user interface at 10.6084/m9.figshare.11344046.v1, and its code and datasets are available in GitHub at . [ABSTRACT FROM AUTHOR]

Scalable and high-throughput electrophysiological measurement systems are necessary to accelerate the elucidation of cardiac diseases in drug development. Optical mapping is the primary method of simultaneously measuring several key electrophysiological parameters, such as action potentials, intracellular free calcium and conduction velocity, at high spatiotemporal resolution. This tool has been applied to isolated whole-hearts, whole-hearts in-vivo, tissue-slices and cardiac monolayers/tissue-constructs. Although optical mapping of all of these substrates have contributed to our understanding of ion-channels and fibrillation dynamics, cardiac monolayers/tissue-constructs are scalable macroscopic substrates that are particularly amenable to high-throughput interrogation. Here, we describe and validate a scalable and fully-automated monolayer optical mapping robot that requires no human intervention and with reasonable costs. As a proof-of-principle demonstration, we performed parallelized macroscopic optical mapping of calcium dynamics in the well-established neonatal-rat-ventricular-myocyte monolayer plated on standard 35 mm dishes. Given the advancements in regenerative and personalized medicine, we also performed parallelized macroscopic optical mapping of voltage dynamics in human pluripotent stem cell-derived cardiomyocyte monolayers using a genetically encoded voltage indictor and a commonly-used voltage sensitive dye to demonstrate the versatility of our system., Competing Interests: PL is both an owner and employee of Essel Research and Development Inc. LH, YN, MM and GS are employees of Merck Sharp & Dohme LLC, a subsidiary of Merck & Co., Inc., Rahway, NJ, USA. MAL is a scientific founder and paid consultant for BlueRock Therapeutics LP. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (© 2023 Lee, Hou, Alibhai, Al-attar, Simon-Chica, Redondo-Rodriguez, Nie, Mirotsou, Laflamme, Swaminath and Filgueiras-Rama.)

Acid-sensing ion channel 1a (ASIC1a) is involved in several pathologies, including neurodegenerative and neuroinflammatory disorders, stroke, epilepsy, and inflammatory pain. ASIC1a has been the subject of intense drug discovery programs devoted to the development of new pharmacological tools for its modulation. However, these efforts to generate new compounds have faced the lack of an efficient screening procedure. In the past decades, improvements in screening technologies and fluorescent sensors for the study of ion channels have provided new opportunities in this field. Unfortunately, ASIC1a is mainly a Na+ permeable channel and undergoes desensitization after its activation, two features that make the use of the available screening procedures problematic. We propose here a novel screening approach for the study of ASIC1a activity in full automation. Our method is based on the stimulation of ASIC1a-expressing cells by protons and the use of electrochromic fluorescent voltage sensors as a readout of ion channel activation. This method will prove to be useful for drug screening programs aimed at ASIC1a modulation. [ABSTRACT FROM AUTHOR]

The Enteric Nervous System (ENS) plays a key role in regulating the function of the gastrointestinal tract. The knowledge about the function of neurons is based on experiments using the intracellular recording method. Limitations of the method have become a stimulus for developing an alternative technique that would record cell membrane potential changes without mechanical interruption and with no cells bias due to their size. The recently developed neuroimaging method meets these demands. The principle of the technique is based on fluorescence of voltage sensitive dyes (VSD) specific molecules that incorporated in cell membranes react to their potential. Photodiode arrays or charge-coupled device (CCD) cameras can be used for acquiring the fluorescent light that permits to monitor fast changes in membrane potential. The Multisite Optical Recording Technique (MSORT) is capable of recording changes in membrane potential in all neurons in the ENS with sufficient spatial and temporal resolution. Studies published up to date are very promising and give an interesting view on the function of neurons in the ENS.

Abstract: Fundamental understanding of higher cognitive functions can greatly benefit from imaging of cortical activity with high spatiotemporal resolution in the behaving non-human primate. To achieve rapid imaging of high-resolution dynamics of cortical representations of spontaneous and evoked activity, we designed a novel data acquisition protocol for sensory stimulation by rapidly interleaving multiple stimuli in continuous sessions of optical imaging with voltage-sensitive dyes. We also tested a new algorithm for the “temporally structured component analysis” (TSCA) of a multidimensional time series that was developed for our new data acquisition protocol, but was tested only on simulated data (Blumenfeld, 2010). In addition to the raw data, the algorithm incorporates prior knowledge about the temporal structure of the data as well as input from other information. Here we showed that TSCA can successfully separate functional signal components from other signals referred to as noise. Imaging of responses to multiple visual stimuli, utilizing voltage-sensitive dyes, was performed on the visual cortex of awake monkeys. Multiple cortical representations, including orientation and ocular dominance maps as well as the hitherto elusive retinotopic representation of orientation stimuli, were extracted in only 10s of imaging, approximately two orders of magnitude faster than accomplished by conventional methods. Since the approach is rather general, other imaging techniques may also benefit from the same stimulation protocol. This methodology can thus facilitate rapid optical imaging explorations in monkeys, rodents and other species with a versatility and speed that were not feasible before. [Copyright &y& Elsevier]

Fast responding voltage sensitive dyes, RH421 and di-4-ASPBS, were used to study the electrogenic properties of plant plasma membrane proton pumps on sealed plasma membrane vesicles extracted by two-phase partitioning from Beta vulgaris and Avena sativa cv Swan root material. Fluorescence spectroscopy in the presence of the dye RH421 (10.8 nM) was sufficiently sensitive to detect electrogenic activity of the extracted plant vesicles. The dye detection system could detect inhibition of electrogenic activity of vesicles by vanadate (75 μM) and stimulation by nigericin (0.5 μM). The newly developed dye di-4-ASPBS was less sensitive to detecting the electrogenic proton pump activity. This study represents an important innovation in plant biophysics as this class of fast responding voltage sensitive dyes have never to our knowledge been used to study electrogenic proton pump activity derived from plant membranes and represents a novel approach for carrying out such studies. [ABSTRACT FROM AUTHOR]

Abstract: Apparent motion (AM) is a robust visual illusion, in which fast displays of static objects in successively different positions elicit the perception of object motion. Neurons in higher order areas 21 and 19 compute object motion under such conditions and send feedback to early visual areas 18 and 17, which is instrumental in eliciting computation of motion in those very areas. To explore the computational dynamics of AM, we made a neural field model consisting of two one-dimensional rings of simple neurons expressing firing rates, one for areas 17/18 and one for areas 19/21. The model neurons, without any orientation or direction selectivity, computed apparent motion for the range of space-timings of stimuli associated with short- and long-range AM in humans. The computation of long-range AM in 17/18 required two model areas and the presence of feedback and conduction/computation delays between those areas. As in the in vivo experiments of long-range AM, the stationary stimuli were initially mapped as stationary in model area 17/18, but after the feedback also these lower areas computed AM. The dynamics of the two-area network produces short-range and long-range apparent motion for a large range of feedback strengths and a small range of lateral excitation near the bifurcation to an amplitude instability. The computation of AM in higher order areas was due to the neurons in these areas having large receptive fields as a consequence of divergent feed-forward connectivity. This implies that these areas compute long-range AM when early areas 17 and 18 do not, and therefore higher order areas must enslave lower order areas to compute the same, if the whole network is to arrive at a coherent perceptual solution. [Copyright &y& Elsevier]

Abstract: Neurons in the visual cortex receive input from the lateral geniculate nucleus (feed-forward), higher order visual areas (feedback) and local neurons in the surroundings (lateral interactions). Here we first briefly review the approximate timing and proportion of these three types of influences on the membrane potentials in visual areas 17, 18 and 19. Then we present original results from an independent component analysis of multiunit spike trains in the same visual areas to resolve the contribution from these three sources. We stimulated the visual cortex of the ferret with a small transient contrast square stimulus and recorded the multiunit activity in areas 17, 18 and 19 with single or multiple electrodes. The spike trains had three reproducible components having their maxima at 40, 55 and 105ms after the start of the presentation of the stimulus. The time course of the third component was significantly correlated with the population membrane potential in the supragranular layers of areas 17, 18 and 19. The first spike train component was interpreted as a feed-forward response, the second spike train component as driving the laterally spreading depolarization and the third spike train component as the firing caused by the lateral spreading- and the feedback depolarization. [Copyright &y& Elsevier]

Objective: Unidirectional conduction block (UCB) and reentry may occur as a consequence of an abrupt tissue expansion and a related change in the electrical load. The aim of this study was to evaluate critical dimensions of the tissue necessary for establishing UCB in heart cell culture. Methods: Neonatal rat heart cell cultures with cell strands of variable width emerging into a large cell area were grown using a technique of patterned cell growth. Action potential upstrokes were measured using a voltage sensitive dye (RH-237) and a linear array of 10 photodiodes with a 15 μm resolution. A mathematical model was used to relate action potential wave shapes to underlying ionic currents. Results: UCB (block of a single impulse in anterograde direction — from a strand to a large area — and conduction in the retrograde direction) occurred in narrow cell strands with a width of 15(SD 4) μm (1–2 cells in width, n = 7) and there was no conduction block in strands with a width of 31(8) μm (n = 9, P < 0.001) or larger. The analysis of action potential waveshapes indicated that conduction block was either due to geometrical expansion alone (n = 5) or to additional local depression of conduction (n = 2). In wide strands, action potential upstrokes during anterograde conduction were characterised by multiple rising phases. Mathematical modelling showed that two rising phases were caused by electronic current flow, whereas local ionic current did not coincide with the rising portions of the upstrokes. Conclusions: (1) High resolution optical mapping shows multiphasic action potential upstrokes at the region of abrupt expansion. At the site of the maximum decrement in conduction, these peaks were largely determined by the electrotonus and not by the local ionic current. (2) Unidirectional conduction block occurred in strands with a width of 15(4) μm (1–2 cells). [ABSTRACT FROM PUBLISHER]

We monitored optical signals from cortex stained with a voltage sensitive dye to study activity evoked by intracortical electrical stimulation. The objectives were to study the spatial and temporal spread of activity from intrinsic connections near the stimulating electrode and to develop a new technique to study extrinsic projections from striate cortex to extrastriate target areas. Various measures were made of the time course of the optical signal (latency, rise time, decay time, temporal summation, facilitation versus depression, and presence or absence of a slow undershoot); in general, these measures were found to vary significantly across different response positions, different experiments, and even different runs within the same experiment. The spatial distribution of responses near the stimulating electrode in striate cortex was usually elliptical and was most often elongated along the anterior-posterior axis, with a typical size (full width at 75% max) of 1.3 mm (anterior-posterior axis) by 0.75 mm (medio-lateral axis). In some cases, complex spatio-temporal patterns were observed, in which the position of the maximum optical signal shifted with time or split into multiple peaks. In eight experiments, a response focus was found in extrastriate cortex at an expected location within the lateromedial area (LM). The response focus in LM was typically about half the size of that in striate cortex. In some experiments we observed additional focal responses in the anterolateral visual area (AL). The extrastriate responses showed a significant delay (3-10 ms) in onset and time to peak relative to the striate response. The validity of this technique for determining extrinsic projections was tested in two types of experiments. In the first, stimulation from two electrodes in striate cortex generated response foci consistent with the known topographic organization of area LM. In the second, the optically measured response focus was shown to correlate with the histologically reconstructed projection of a chemical tracer injected near the site of stimulation. We discuss the chain of neurophysiological events that occur during and after focal electrical stimulation and how they relate to the observed optical signal. We conclude that direct passive responses were a small component of our signal, that the component due to action potentials in directly stimulated neurons should have occurred in the first 1-2 ms post stimulus and is small compared to the peak signal, and that overall our signals were probably dominated by a combination of asynchronously occurring action potentials and excitatory and inhibitory synaptic potentials. These results, together with the prospect of being able to trace many connections in a single experiment, indicate that the combination of optical recording and focal electrical stimulation provides a valuable means for analyzing structural and physiological aspects of cortical circuitry. [ABSTRACT FROM AUTHOR]

An optical method was used to measure action potentials from frog ventricle, in vitro, under normal physiological conditions with 0.5-1 mM Ca Ringer's solution. The approach presented in this paper involves a portable fluorimeter coupled to a multimode optical fiber running into a glass pipette ('optrode') to carry both excitation light to and fluorescence from the ventricle stained with the voltage sensitive dye di-4-ANEPPS. A suction technique was used to stabilize the optrode-tissue interface, significantly reducing motion artifacts from the beating ventricle. The typical fractional change in fluorescence intensity for an action potential was −9%. The optical recordings faithfully reproduced membrane action potentials as measured with microelectrode recordings. To confirm further the validity of our method we studied the effect of an increasing stimulation rate on the optical action potential. The amplitude of the action potential did not increase, and the change in action potential duration was similar to published results obtained with microelectrode recordings, suggesting that our optical action potentials are relatively free of motion artifacts. Finally, our optical recordings suggest that during anodal and cathodal point stimulation, the time course of membrane potential differs from that predicted simply by a passive cable model. [ABSTRACT FROM AUTHOR]

Local electric fields modulate a variety of cellular processes and are particularly relevant in the nervous system. Signal propagation along an axon occurs through small (around 100 mV) rapid changes in the potential across the cell membrane. Experimental techniques capable of measuring voltage changes in cells, tissue, and animal models have been instrumental in understanding cell signaling in the nervous system. Optical approaches relying on fluorescent voltage sensors have emerged as a minimally invasive – and less technically demanding – alternative to traditional, electrode-based techniques. Combined with state-of-the-art optical microscopy techniques, luminescent voltage sensors allow voltage sensing at relevant timescales (sub-millisecond) and diffraction-limited spatial resolutions. Voltage-sensitive dyes and proteins are already well-established fluorescent voltage sensors, while semiconductor nanostructures and nitrogen vacancy-containing diamonds are attracting increasing attention due to their superior photoluminescent properties. In this review, we describe the working mechanism of the different classes of fluorescent voltage sensors, discuss their advantages and limitations, and compare their performance based on sensitivity and temporal resolution. Further, we discuss the more recent advances in optical voltage sensing and identify the knowledge gaps that need to be addressed for this technique to realize its full potential as a valid replacement to electrode-based sensing. • The state of the art in photoluminescent voltage sensing is discussed. • We describe the working mechanism of different photoluminescent voltage sensors. • We compare the performance of molecular and nanoparticle-based voltage sensors. • We summarize the approaches for calibrating sensors and their limitations. • We discuss the current limitations of photoluminescent voltage sensors. [ABSTRACT FROM AUTHOR]

Sensory responses in neocortex are strongly modulated by changes in brain state, such as those observed between sleep stages or attentional levels. However, the specific effects of network state changes on the spatiotemporal properties of sensory responses are poorly understood. The slow oscillation, which is observed in neocortex under ketamine-xylazine anesthesia and is characterized by alternating depolarizing (up-states) and hyperpolarizing (down-states) phases, provides an opportunity to study the state-dependence of primary sensory responses in large networks. Here we used voltage sensitive dye (VSD) imaging to record the spatiotemporal properties of sensory responses and local field potential (LFP) and multiunit activity (MUA) recordings to monitor the ongoing brain state in which the sensory responses occurred. Despite a rich variability of slow oscillation patterns, sensory responses showed a consistent relationship with the ongoing oscillation and triggered a new up-state only after the termination of the refractory period that followed the preceding oscillatory cycle. We show that spatiotemporal properties of whisker-evoked responses are highly dependent on their timing with regard to the ongoing oscillation. In both the up- and down-states, responses spread across large portions of the barrel field, although the up-state responses were reduced in total area due to their sparseness. The depolarizing response in the up-state showed a tendency to propagate along the rows, with an amplitude and slope favoring the higher-numbered arcs. In the up-state, but not in the down-state, the depolarizing response was followed by a hyperpolarizing wave with a consistent spatial structure. We measured the suppression of whisker-evoked responses by a preceding response at 100 ms, and found that suppression showed the same spatial asymmetry as the depolarization. Because the resting level of cells in the up-state is likely to be closer to that in the awake animal, we suggest that the polarities in signal propagation which we observed in the up-state could be used as computational mechanisms in the behaving animal. These results demonstrate the critical importance of ongoing network activity on the dynamics of sensory responses and their integration.