Search

We present a novel method to measure the arrival time statistics of continuous electron beams with sub-ps resolution, based on the combination of an RF deflection cavity and fast single electron imaging. We observe Poissonian statistics within time bins from 100~ns to 2~ns and increasingly pronounced sub-Poissonian statistics as the time bin decreases from 2~ps to 340~fs. This 2D streak-camera in principle enables femtosecond-level arrival time measurements, paving the way to observing Pauli blocking effects in electron beams and thus serving as an essential diagnostic tool towards degenerate electron beam sources for free electron quantum optics.

We propose a scheme for constructing a phase plate for use in an ultrafast Zernike-type phase contrast electron microscope, based on the interaction of the electron beam with a strongly focused, high-power femtosecond laser pulse and a pulsed electron beam. Analytical expressions for the phase shift using the time-averaged ponderomotive potential and a paraxial approximation for the focused laser beam are presented, as well as more rigorous quasiclassical simulations based on the quantum phase integral along classical, relativistic electron trajectories in an accurate, non-paraxial description of the laser beam. The results are shown to agree well unless the laser beam is focused to a waist size below a wavelength. For realistic (off-the-shelf) laser parameters the optimum phase shift of $-\pi/2$ is shown to be achievable. When combined with RF-cavity based electron chopping and compression techniques to produce electron pulses, a femtosecond regime pulsed phase contrast microscope can be constructed. The feasibility and robustness of the scheme are further investigated using the simulations, leading to motivated choices for design parameters such as wavelength, focus size and polarization., Comment: 16 pages, 6 figures

Ultracold atomic gases have been used extensively in recent years to realize textbook examples of condensed matter phenomena. Recently, phase transitions to ordered structures have been predicted for gases of highly excited, 'frozen' Rydberg atoms. Such Rydberg crystals are a model for dilute metallic solids with tunable lattice parameters, and provide access to a wide variety of fundamental phenomena. We investigate theoretically how such structures can be created in four distinct cold atomic systems, by using tailored laser-excitation in the presence of strong Rydberg-Rydberg interactions. We study in detail the experimental requirements and limitations for these systems, and characterize the basic properties of small crystalline Rydberg structures in one, two and three dimensions., Comment: 23 pages, 10 figures, MPIPKS-ITAMP Tandem Workshop, Cold Rydberg Gases and Ultracold Plasmas (CRYP10), Sept. 6-17, 2010

Using direct-write atom lithography, Fe nanolines are deposited with a pitch of 186 nm, a full width at half maximum (FWHM) of 50 nm, and a height of up to 6 nm. These values are achieved by relying on geometrical collimation of the atomic beam, thus without using laser collimation techniques. This opens the way for applying direct-write atom lithography to a wide variety of elements., Comment: 7 pages, 11 figures

We report on a new technique to split an atomic beam coherently with an easily adjustable splitting angle. In our experiment metastable helium atoms in the |{1s2s}^3S_1 M=1> state diffract from a polarization gradient light field formed by counterpropagating \sigma^+ and \sigma^- polarized laser beams in the presence of a homogeneous magnetic field. In the near-adiabatic regime, energy conservation allows the resonant exchange between magnetic energy and kinetic energy. As a consequence, symmetric diffraction of |M=0> or |M=-1> atoms in a single order is achieved, where the order can be chosen freely by tuning the magnetic field. We present experimental results up to 6th order diffraction (24 \hbar k momentum splitting, i.e., 2.21 m/s in transverse velocity) and present a simple theoretical model that stresses the similarity with conventional Bragg scattering. The resulting device constitutes a flexible, adjustable, large-angle, three-way coherent atomic beam splitter with many potential applications in atom optics and atom interferometry., Comment: 4 pages, 5 figures

An experiment is proposed to excite the 'forbidden' 1s2s 3S1 - 1s2s 1S0 magnetic dipole (M1) transition at 1557 nm in a collimated and slow atomic beam of metastable helium atoms. It is demonstrated that an excitation rate of 5000 /s can be realised with the beam of a 2W narrowband telecom fiber laser intersecting the atomic beam perpendicularly. A Doppler-limited sub-MHz spectroscopic linewidth is anticipated. Doppler-free excitation of 2% of trapped and cooled atoms may be realised in a one-dimensional optical lattice geometry, using the 2W laser both for trapping and spectroscopy. The very small (8 Hz) natural linewidth of this transition presents an opportunity for accurate tests of atomic structure calculations of the helium atom. A measurement of the 3He - 4He isotope shift allows for accurate determination of the difference in nuclear charge radius of both isotopes., Comment: accepted for publication in Europhysics Letters

We propose and experimentally demonstrate a method to prepare a nonspreading atomic wave packet. Our technique relies on a spatially modulated absorption constantly chiseling away from an initially broad de Broglie wave. The resulting contraction is balanced by dispersion due to Heisenberg's uncertainty principle. This quantum evolution results in the formation of a nonspreading wave packet of Gaussian form with a spatially quadratic phase. Experimentally, we confirm these predictions by observing the evolution of the momentum distribution. Moreover, by employing interferometric techniques, we measure the predicted quadratic phase across the wave packet. Nonspreading wave packets of this kind also exist in two space dimensions and we can control their amplitude and phase using optical elements., Comment: 4 figures

With a two-dimensional (2D) optical mask, nanoscale patterns are created for the first time in an atom lithography process using metastable helium atoms. The internal energy of the atoms is used to locally damage a hydrofobic resist layer, which is removed in a wet etching process. Experiments have been performed with several polarizations for the optical mask, resulting in different intensity patterns, and corresponding nanoscale structures. The results for a linear polarized light field show an array of holes with a diameter of 260 nm, in agreement with a computed pattern. With a circularly polarized light field a line pattern is observed with a spacing of 766 nm. Simulations taking into account many possible experimental imperfections can not explain this pattern., Comment: 5 pages, 4 figures

The motion of metastable helium atoms travelling through a standing light wave is investigated with a semi-classical numerical model. The results of a calculation including the velocity dependence of the dipole force are compared with those of the commonly used approach, which assumes a conservative dipole force. The comparison is made for two atom guiding regimes that can be used for the production of nanostructure arrays; a low power regime, where the atoms are focused in a standing wave by the dipole force, and a higher power regime, in which the atoms channel along the potential minima of the light field. In the low power regime the differences between the two models are negligible and both models show that, for lithography purposes, pattern widths of 150 nm can be achieved. In the high power channelling regime the conservative force model, predicting 100 nm features, is shown to break down. The model that incorporates velocity dependence, resulting in a structure size of 40 nm, remains valid, as demonstrated by a comparison with quantum Monte-Carlo wavefunction calculations., Comment: 9 pages, 4 figures