Search

Purpose: To compare the accuracy, inter- and intrarater reliability, and user-experience of manual and semi-automatic preoperative leg-alignment measurement planning software for high tibial osteotomy (HTO)., Methods: Thirty patients (31 lower limbs) who underwent a medial opening wedge HTO between 2017 and 2019 were retrospectively included. The mechanical lateral distal femur angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), and planned correction angle were measured on preoperative long-leg full weight-bearing radiographs utilising PACS Jivex Review® v5.2 manual and TraumaCad® v2.4 semi-automatic planning software. Independent measurements were performed by four raters. Two raters repeated the measurements. Accuracy in the standard error of measurement (SEM), inter- and intrarater reliability, and user-experience were analysed. Additionally, measurements errors of more than 3° were remeasured and reanalysed., Results: The SEMs of all measured varus malalignment angles and planned correction angle were within 0.8° of accuracy for both software programs. Measurements utilising the manual software demonstrated moderate interrater intraclass correlation coefficient (ICC)-values for the mLDFA and mMPTA, and an excellent interrater ICC-value for the correction angle (0.810, 0.779, and 0.981, respectively). Measurements utilising the semi-automatic software indicated excellent interrater ICC-values for the mLDFA, mMPTA, and correction angle (0.980, 0.909, and 0.989, respectively). The intrarater reliability varied substantially per angle, presenting excellent intrarater agreements by both raters (ICC >  0.900) for the correction angle in each software program as well as poor-to-excellent ICC-values for the mLDFA (0.282-0.951 and 0.316-0.926) and mMPTA (0.893-0.934 and 0.594-0.941) in both the manual planning and semi-automatic software. Regarding user-experience, semi-automatic software was preferred by two raters, while the other two raters had no distinctive preference. After remeasurement of five outliers, excellent interrater ICC-values were found for the mLDFA (0.913) and mMPTA (0.957)., Conclusions: Semi-automatic software outperforms the manual software when user-experience and outliers are considered. However, both software programs provide similar performance after remeasurement of the human-related erroneous outliers. For clinical practice, both programs can be utilised for HTO planning., Level of Evidence: Diagnostic study, Level III., (© 2022. The Author(s).)

Purpose: The present study assessed the effect of insert articular surface geometry (anatomical versus conventional insert design) on anteroposterior (AP) translation and varus-valgus (VV) laxity in balanced posterior cruciate ligament (PCL) retaining total knee arthroplasty (TKA). Secondly, we evaluated if the AP translation and VV laxity in the reconstructed knee resembled the stability of the native knee., Methods: Nine fresh-frozen full-leg cadaver specimens were used in this study. After testing the native knee, anatomical components of a PCL-retaining implant were implanted. The knee joints were subjected to anteriorly and posteriorly directed forces (at 20° and 90° flexion) and varus-valgus stresses (at 20°, 45° and 90° flexion) in both non-weightbearing and weightbearing situations in a knee kinematics simulator. Measurements were performed in the native knee, TKA with anatomical insert geometry (3° built-in varus, medial concave, lateral convex), and TKA with symmetrical insert geometry., Results: In weightbearing conditions, anterior translations ranged between 2.6 and 3.9 mm at 20° flexion and were < 1 mm at 90° flexion. Posterior translation at 20° flexion was 2.7 mm for the native knee versus 4.0 mm (p = 0.047) and 7.0 mm (p = 0.02) for the symmetrical insert and the anatomical insert, respectively. Posterior translation at 90° flexion was < 1.1 mm and not significantly different between the native knee and insert types. In non-weightbearing conditions, the anterior translation at 20° flexion was 5.9 mm for the symmetrical and 4.6 mm for the anatomical insert (n.s.), compared with 3.0 mm for the native knee (p = 0.02). The anterior translation at 90° flexion was significantly higher for the reconstructed knees (anatomical insert 7.0 mm; symmetrical insert 9.2 mm), compared with 1.6 mm for the native knee (both p = 0.02). Varus-valgus laxity at different flexion angles was independent of insert geometry. A valgus force in weightbearing conditions led to significantly more medial laxity (1°-3° opening) in the native knee at 45° and 90° flexion compared with the reconstructed knee for all flexion angles., Conclusions: Insert geometry seems to have a limited effect with respect to AP translation and VV laxity, in the well-balanced PCL-retaining TKA with an anatomical femoral component. Secondly, AP translation and VV laxity in the reconstructed knee approximated the laxity of the native knee., (© 2021. European Society of Sports Traumatology, Knee Surgery, Arthroscopy (ESSKA).)

Background: The present study assessed the inter- and intra-observer reliability of tibial and femoral rotation measures after total knee arthroplasty (TKA), and evaluated the correlation between these measurement techniques and their clinical relevance., Methods: Femoral rotation and tibial rotation were determined on 42 2D CT-scans made three-months after TKA. Reliability of the radiological measurements (including Berger's method, the anatomical tibial axis and the tibial tuberosity trochlear-groove) was assessed with 15 randomly selected patients measured twice by three observers. Functional outcomes were scored one-year postoperatively with the KSS, VAS pain, VAS satisfaction, KOOS, and Kujala., Results: The inter- and intra-observer reliability of the rotational measurements ranged from good to excellent (ICC 0.67-0.98). Tibial rotation measured with the Berger technique was most reliable (ICC inter = 0.91; ICC intra = 0.96). No strong correlations were found between the different rotational measures or the clinical outcomes and rotational outliers., Conclusions: Tibial rotation is most reliable measured with the technique described by Berger. There were no strong correlations found between the different tibial rotation measures or between the clinical outcomes and the rotational outliers. Further research is needed to gain more insight into optimal positioning and measuring rotation in TKA for clinical practice., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Purpose: Only few long-term data on ligament-balanced cruciate-retaining total knee arthroplasty (CR TKA) are currently available. Either a mobile- or fixed-bearing insert can be chosen, which showed good mid-term outcome and few complications and revisions. This multi-centre retrospective cross-sectional cohort study investigated the 12-year results of primary TKA using a balancing gap technique and compared survival and clinical outcome between fixed and mobile inserts., Methods: In this retrospective cross-sectional cohort study, 557 cases of three clinics (2 Swiss, 1 Dutch) operated between 1998 and 2003 with the first series of a TKA implanted with a balanced gap technique (433 (77.7%) fixed, 124 (22.3%) mobile (anterior-posterior gliding (7-9 mm) and rotational (15°) degrees of freedom) inserts) were included for survival analysis (Kaplan-Meier, by insert type). At the 12-year follow-up (FU) examination of 189 cases, range of motion, knee society score (KSS), numeric rating scale (NRS) for pain and satisfaction were determined and radiographs were evaluated by median tests, by insert type., Results: Of 521 cases available for analysis, 28 (5.4%; 11 fixed, 17 mobile bearing) were revised. Mean cumulative survival after 12.4 years was 97.0% (95% CI 94.7-98.4) for fixed bearings and 85.4% (95% CI 77.5-90.7) after 12.2 years for mobile bearings, p < 0.0001. Patients' mean age at 11.0 years FU (n = 189) was 78.0 (range 54.5-97.3) years. Mean total KSS was 157.8 (24-200) points, and mean passive flexion was 114° (45-150); no clinical score differed significantly between fixed and mobile bearings., Conclusion: This study showed a superior survival for fixed bearing compared with mobile bearing in a CR TKA using a ligament-balanced technique after more than 12 years. Clinical outcomes are excellent to good after long-term follow-up, and similar for fixed and mobile bearing., Level of Evidence: Therapeutic studies-retrospective cohort study, Level III.

Purpose: Incidence of anterior knee pain after total knee arthroplasty (TKA) is reported to be between 4 and 49 %. The incidence of AKP at long-term follow-up and possible determinants after cruciate cruciate-retaining TKA were investigated., Methods: A 10-year follow-up of a cohort of 55 patients (63 TKAs), who received the balanSys™ cruciate-retaining total knee system (Mathys Ltd, Bettlach, Switzerland) between 1999 and 2002, was performed. Patients had undergone the balanced gap technique, with either a fixed bearing or an AP-glide bearing. Standardised diagnostic questions regarding AKP were collected and categorised into two groups: those with and without AKP. The lateral patellar tilt, patellar displacement measurement and modified Insall-Salvati ratio were used for patella position evaluation on skyline radiographs. The Knee Society Score (KSS), the Knee Osteoarthritis Outcome Score (KOOS) and Numerical Rating Scales (NRS) for pain and satisfaction were obtained at follow-up., Results: Sixteen patients in the study population experienced AKP. Incidence of AKP (fixed bearing 13/44; AP-glide bearing baring 3/17) was not dependent on type of insert (n.s.). There were no statistical differences in patella position and tibiofemoral contact point between the AKP group and the no AKP group (n.s.). KSS, KOOS, NRS-pain and NRS-satisfaction were significantly lower for the patients with AKP (all p < 0.05)., Conclusion: Twenty-six percentage of the patients experienced AKP 10 years after balanced gap TKA. Postoperative patella positioning was not found to be a determinant for anterior knee pain after TKA. However, patellar displacement does not seem completely favourable. Moreover, type of bearing was not found a determinant for AKP at long-term follow-up., Level of Evidence: Lower quality prospective cohort study (<80 % follow-up, patients enrolled at different time points in disease), Level II.

Background: The opening wedge approach to high tibial osteotomy (HTO) is perceived to have some advantages relative to the closing wedge approach but it may be associated with delayed and nonunions. Because nonunions evolve over months, it would be advantageous to be able to identify risk factors for and early predictors of nonunion after medial opening wedge HTO., Questions/purposes: We sought to determine whether (1) preoperatively identifiable patient factors, including tobacco use, body mass index > 30 kg/m(2), and degree of correction, are associated with nonunion, and (2) a modified Radiographic Union Score for Tibial Fractures (RUST) score, taken at 6 weeks and 3 months, would be predictive for delayed or nonunion after medial opening wedge HTO., Methods: The medical records and radiographs of 185 patients, 21 bilateral cases, treated with a medial open wedge HTO using the TomoFix(®) device were retrospectively evaluated. For all patients, demographic data regarding risk factors were collected from their records. Diagnosis for delayed or nonunion was already done earlier for standard medical care by the orthopaedic surgeon based on clinical and radiographic grounds. For the retrospective radiographic evaluation, a modified RUST score was used in which each tibial cortex is scored by one observer. Logistic regression analysis was used to identify preoperative and postoperative predictive factors for developing delayed or nonunion. In the series, a total of 19 patients (9.2%) developed clinically delayed/nonunion of whom 10 patients (4.9%) developed a nonunion., Results: Smoking was identified as a risk factor for developing delayed/nonunion (19% for smokers versus 5.4% for nonsmokers; p = 0.005; odds ratio, 4.1; 95% confidence interval, 1.5-10.7). By contrast, body mass index, lateral cortical hinge fracture, age, infection, and degree of correction were not risk factors. Patients with delayed/nonunion had lower RUST scores at all time points when a radiograph was taken compared with the total study group., Conclusions: The RUST score at 6 weeks and 3 months after surgery and the use of tobacco were identified as predictive factors for development of delayed union and nonunion after open wedge HTO. Based on these results, we now actively try to stop patients from smoking and these data are helpful in doing that. The RUST score may be of use to identify which patients are at risk for developing a delayed union so that interventions may be offered earlier in the course of care., Level of Evidence: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Purpose: To investigate the effects of anterior cruciate ligament (ACL) deficiency and nonanatomic single-bundle (SB) and anatomic double-bundle (DB) ACL reconstruction on the contact characteristics of the patellofemoral (PF) joint., Methods: By use of a materials testing system, 7 fresh-frozen human cadaveric knees were tested. The following states were tested: ACL-intact knee, nonanatomic SB ACL reconstruction, anatomic DB ACL reconstruction, and ACL-deficient knee. Hamstring autografts were used. PF contact pressures and areas were measured with pressure-sensitive film at 30°, 60°, and 90° of knee flexion with a constant 100-N load on the quadriceps tendon., Results: The total contact area of ACL-deficient and nonanatomic SB ACL-reconstructed knees (123.8 ± 63.9 and 149.6 ± 79.3 mm(2), respectively) significantly decreased when compared with those of the intact knee (206.1 ± 83.6 mm(2)) at 30° of knee flexion. The lateral-facet peak pressure of ACL-deficient and nonanatomic SB ACL-reconstructed knees (1.12 ± 0.52 and 1.22 ± 0.54 MPa, respectively) significantly decreased when compared with those of the intact knee (0.68 ± 0.38 MPa) at 90° of knee flexion. Anatomic DB ACL reconstruction restored the contact pressures and areas to values similar to those of the intact knee (no significant difference)., Conclusions: ACL deficiency resulted in a significant decrease in the total and medial PF contact areas and in an increase in the lateral PF contact pressure. Anatomic DB ACL reconstruction more closely restored normal PF contact area and pressure than did nonanatomic SB ACL reconstruction., Clinical Relevance: Our findings suggest that the changes in the PF contact area and pressures in ACL deficiency and after nonanatomic SB ACL reconstruction may be one of the causes of PF osteoarthritis or other related PF problems found at long-term follow-up. Anatomic DB ACL reconstruction may reduce the incidence of PF problems by closely restoring the contact area and pressure., (Copyright © 2010 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

The objective of this study was to investigate the accurate AM and PL tunnel positions in an anatomical double-bundle ACL reconstruction using human cadaver knees with an intact ACL. Fifteen fresh-frozen non-paired adult human knees with a median age of 60 were used. AM and PL bundles were identified by the difference in tension patterns. First, the center of femoral PL and AM bundles were marked with a K-wire and cut from the femoral insertion site. Next, each bundle was divided at the tibial side, and the center of each AM and PL tibial insertion was again marked with a K-wire. Tunnel placement was evaluated using a C-arm radiographic device. For the femoral side assessment, Bernard and Hertel's technique was used. For the tibial side assessment, Staubli's technique was used. After radiographic evaluations, all tibias' soft tissues were removed with a 10% NaOH solution, and tunnel placements were evaluated. In the radiographic evaluation, the center of the femoral AM tunnel was placed at 15% in a shallow-deep direction and at 26% in a high-low direction. The center of the PL bundle was found at 32% in a shallow-deep direction and 52% in a high-low direction. On the tibial side, the center of the AM tunnel was placed at 31% from the anterior edge of the tibia, and the PL tunnel at 50%. The ACL tibial footprint was placed close to the center of the tibia and was oriented sagittally. AM and PL tunnels can be placed in the ACL insertions without any coalition. The native ACL insertion site has morphological variety in both the femoral and tibial sides. This study showed, anatomically and radiologically, the AM and PL tunnel positions in an anatomical ACL reconstruction. We believe that this study will contribute to an accurate tunnel placement during ACL reconstruction surgery and provide reference data for postoperative radiographic evaluation.

Malignant transformation of giant congenital nevi (GCN) is very rare, but may already occur in childhood. Benign proliferative nodules in GCN may clinically and histologically mimic a malignant melanoma. We report a newborn infant with large proliferative nodules and multiple satellite nevi in a GCN of the bathing suit type. The diagnosis in our patient was based on the smooth transition of the pre-existing lesion and the nodule, the absence of strong atypical nuclei, the atypical mitotic figures, the ascension of melanocytes in the epidermis and the absence of necrosis. A review of the literature showed that the clinical and the histological features of benign (proliferative) nodules are variable. The awareness and the identification of this entity by clinicians and pathologist are imperative to prevent diagnostic errors.

A synthetic medium for growing Rhodobacter sphaeroides R-26 is developed. This medium opened the way to the preparation of photosynthetic reaction centers incorporated with L-[4'-13C]tyrosine or L-[1'-15N]tryptophan. Gas chromatography combined with mass spectroscopy was used to estimate the metabolic incorporation of the labeled amino acid into the protein. Conditions were found for near-quantitative incorporation of labeled aromatic amino acids into the reaction center.