Search

Natural populations of Arabidopsis thaliana provide powerful systems to study the adaptation of wild plant species. Previous research has predominantly focused on global populations or accessions collected from regions with diverse climates. However, little is known about the genetics underlying adaptation in regions with mild environmental clines. We have examined a diversity panel consisting of 192 A. thaliana accessions collected from the Netherlands, a region with limited climatic variation. Despite the relatively uniform climate, we identified evidence of local adaptation within this population. Notably, semidwarf accessions, due to mutation of the GIBBERELLIC ACID REQUIRING 5 (GA5) gene, occur at a relatively high frequency near the coast and these displayed enhanced tolerance to high wind velocities. Additionally, we evaluated the performance of the population under iron deficiency conditions and found that allelic variation in the FE SUPEROXIDE DISMUTASE 3 (FSD3) gene affects tolerance to low iron levels. Moreover, we explored patterns of local adaptation to environmental clines in temperature and precipitation, observing that allelic variation at LA RELATED PROTEIN 1C (LARP1c) likely affects drought tolerance. Not only is the genetic variation observed in a diversity panel of A. thaliana collected in a region with mild environmental clines comparable to that in collections sampled over larger geographic ranges but it is also sufficiently rich to elucidate the genetic and environmental factors underlying natural plant adaptation., (© 2024 The Author(s). The Plant Journal published by Society for Experimental Biology and John Wiley & Sons Ltd.)

Although plants harbor a huge phytochemical diversity, only a fraction of plant metabolites is functionally characterized. In this work, we aimed to identify the genetic basis of metabolite functions during harsh environmental conditions in Arabidopsis thaliana. With machine learning algorithms we predicted stress-specific metabolomes for 23 (a)biotic stress phenotypes of 300 natural Arabidopsis accessions. The prediction models identified several aliphatic glucosinolates (GLSs) and their breakdown products to be implicated in responses to heat stress in siliques and herbivory by Western flower thrips, Frankliniella occidentalis. Bivariate GWA mapping of the metabolome predictions and their respective (a)biotic stress phenotype revealed genetic associations with MAM, AOP, and GS-OH, all three involved in aliphatic GSL biosynthesis. We, therefore, investigated thrips herbivory on AOP, MAM, and GS-OH loss-of-function and/or overexpression lines. Arabidopsis accessions with a combination of MAM2 and AOP3, leading to 3-hydroxypropyl dominance, suffered less from thrips feeding damage. The requirement of MAM2 for this effect could, however, not be confirmed with an introgression line of ecotypes Cvi and Ler, most likely due to other, unknown susceptibility factors in the Ler background. However, AOP2 and GS-OH, adding alkenyl or hydroxy-butenyl groups, respectively, did not have major effects on thrips feeding. Overall, this study illustrates the complex implications of aliphatic GSL diversity in plant responses to heat stress and a cell-content-feeding herbivore., (© 2024 The Author(s). The Plant Journal published by Society for Experimental Biology and John Wiley & Sons Ltd.)

Chromosome substitution lines (CSLs) are tentatively supreme resources to investigate non-allelic genetic interactions. However, the difficulty of generating such lines in most species largely yielded imperfect CSL panels, prohibiting a systematic dissection of epistasis. Here, we present the development and use of a unique and complete panel of CSLs in Arabidopsis thaliana, allowing the full factorial analysis of epistatic interactions. A first comparison of reciprocal single chromosome substitutions revealed a dependency of QTL detection on different genetic backgrounds. The subsequent analysis of the complete panel of CSLs enabled the mapping of the genetic interactors and identified multiple two- and three-way interactions for different traits. Some of the detected epistatic effects were as large as any observed main effect, illustrating the impact of epistasis on quantitative trait variation. We, therefore, have demonstrated the high power of detection and mapping of genome-wide epistasis, confirming the assumed supremacy of comprehensive CSL sets., (© 2024. The Author(s).)

Multi-parent populations (MPPs) are attractive for genetic and breeding studies because they combine genetic diversity with an easy-to-control population structure. Most methods for mapping QTLs in MPPs focus on the detection of QTLs in single environments. Little attention has been given to mapping QTLs in multienvironment trials (METs) and to detecting and modeling QTL-by-environment interactions (QEIs). We present mixed model approaches for the detection and modeling of consistent versus environment-dependent QTLs, i.e., QTL-by-environment interaction (QEI). QTL effects are assumed to be normally distributed with variances expressing consistency or dependence on environments and families. The entries of the corresponding design matrices are functions of identity-by-descent (IBD) probabilities between parents and offspring and follow from the parental origin of offspring DNA. A polygenic effect is added to the models to account for background genetic variation. We illustrate the wide applicability of our method by analyzing several public MPP datasets with observations from METs. The examples include diallel, nested association mapping (NAM), and multi-parent advanced inter-cross (MAGIC) populations. The results of our approach compare favorably with those of previous studies that used tailored methods., Competing Interests: Author RJ was employed by Rijk Zwaan Breeding B.V. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Li, Boer, Joosen, Zheng, Percival-Alwyn, Cockram and Van Eeuwijk.)

Intoduction: In systems biology, an organism is viewed as a system of interconnected molecular entities. To understand the functioning of organisms it is essential to integrate information about the variations in the concentrations of those molecular entities. This information can be structured as a set of networks with interconnections and with some hierarchical relations between them. Few methods exist for the reconstruction of integrative networks., Objective: In this work, we propose an integrative network reconstruction method in which the network organization for a particular type of omics data is guided by the network structure of a related type of omics data upstream in the omic cascade. The structure of these guiding data can be either already known or be estimated from the guiding data themselves., Methods: The method consists of three steps. First a network structure for the guiding data should be provided. Next, responses in the target set are regressed on the full set of predictors in the guiding data with a Lasso penalty to reduce the number of predictors and an L2 penalty on the differences between coefficients for predictors that share edges in the network for the guiding data. Finally, a network is reconstructed on the fitted target responses as functions of the predictors in the guiding data. This way we condition the target network on the network of the guiding data., Conclusions: We illustrate our approach on two examples in Arabidopsis. The method detects groups of metabolites that have a similar genetic or transcriptomic basis., (© 2024. The Author(s).)

Introduction: Dynamic crop growth models are an important tool to predict complex traits, like crop yield, for modern and future genotypes in their current and evolving environments, as those occurring under climate change. Phenotypic traits are the result of interactions between genetic, environmental, and management factors, and dynamic models are designed to generate the interactions producing phenotypic changes over the growing season. Crop phenotype data are becoming increasingly available at various levels of granularity, both spatially (landscape) and temporally (longitudinal, time-series) from proximal and remote sensing technologies., Methods: Here we propose four phenomenological process models of limited complexity based on differential equations for a coarse description of focal crop traits and environmental conditions during the growing season. Each of these models defines interactions between environmental drivers and crop growth (logistic growth, with implicit growth restriction, or explicit restriction by irradiance, temperature, or water availability) as a minimal set of constraints without resorting to strongly mechanistic interpretations of the parameters. Differences between individual genotypes are conceptualized as differences in crop growth parameter values., Results: We demonstrate the utility of such low-complexity models with few parameters by fitting them to longitudinal datasets from the simulation platform APSIM-Wheat involving in silico biomass development of 199 genotypes and data of environmental variables over the course of the growing season at four Australian locations over 31 years. While each of the four models fits well to particular combinations of genotype and trial, none of them provides the best fit across the full set of genotypes by trials because different environmental drivers will limit crop growth in different trials and genotypes in any specific trial will not necessarily experience the same environmental limitation., Discussion: A combination of low-complexity phenomenological models covering a small set of major limiting environmental factors may be a useful forecasting tool for crop growth under genotypic and environmental variation., Competing Interests: Authors ST, RM, NF, and CM were employees of Corteva Agriscience™ when this manuscript was conceived. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 van Voorn, Boer, Truong, Friedenberg, Gugushvili, McCormick, Bustos Korts, Messina and van Eeuwijk.)

Plants can express different phenotypic responses following polyploidization, but ploidy-dependent phenotypic variation has so far not been assigned to specific genetic factors. To map such effects, segregating populations at different ploidy levels are required. The availability of an efficient haploid inducer line in Arabidopsis thaliana allows for the rapid development of large populations of segregating haploid offspring. Because Arabidopsis haploids can be self-fertilised to give rise to homozygous doubled haploids, the same genotypes can be phenotyped at both the haploid and diploid ploidy level. Here, we compared the phenotypes of recombinant haploid and diploid offspring derived from a cross between two late flowering accessions to map genotype × ploidy (G × P) interactions. Ploidy-specific quantitative trait loci (QTLs) were detected at both ploidy levels. This implies that mapping power will increase when phenotypic measurements of monoploids are included in QTL analyses. A multi-trait analysis further revealed pleiotropic effects for a number of the ploidy-specific QTLs as well as opposite effects at different ploidy levels for general QTLs. Taken together, we provide evidence of genetic variation between different Arabidopsis accessions being causal for dissimilarities in phenotypic responses to altered ploidy levels, revealing a G × P effect. Additionally, by investigating a population derived from late flowering accessions, we revealed a major vernalisation-specific QTL for variation in flowering time, countering the historical bias of research in early flowering accessions.

Differential abundance analysis of infant 16S microbial sequencing data is complicated by challenging data properties, including high sparsity, extreme dispersion and the relative nature of the information contained within the data. In this study, we propose a pairwise ratio analysis that uses the compositional data analysis principle of subcompositional coherence and merges it with a beta-binomial regression model. The resulting method provides a flexible and easily interpretable approach to infant 16S sequencing data differential abundance analysis that does not require zero imputation. We evaluate the proposed method using infant 16S data from clinical trials and demonstrate that the proposed method has the power to detect differences, and demonstrate how its results can be used to gain insights. We further evaluate the method using data-inspired simulations and compare its power against related methods. Our results indicate that power is high for pairwise differential abundance analysis of taxon pairs that have a large abundance. In contrast, results for sparse taxon pairs show a decrease in power and substantial variability in method performance. While our method shows promising performance on well-measured subcompositions, we advise strong filtering steps in order to avoid excessive numbers of underpowered comparisons in practical applications., (© The Author(s) 2023. Published by Oxford University Press on behalf of NAR Genomics and Bioinformatics.)

Genome-wide association studies (GWAS) are a useful tool to unravel the genetic architecture of complex traits, but the results can be difficult to interpret. Population structure, genetic heterogeneity, and rare alleles easily result in false positive or false negative associations. This paper describes the analysis of a GWAS panel combined with three bi-parental mapping populations to validate GWAS results, using phenotypic data for steroidal glycoalkaloid (SGA) accumulation and the ratio (SGR) between the two major glycoalkaloids α-solanine and α-chaconine in potato tubers. SGAs are secondary metabolites in the Solanaceae family, functional as a defence against various pests and pathogens and in high quantities toxic for humans. With GWAS, we identified five quantitative trait loci (QTL) of which Sga1.1, Sgr8.1 , and Sga11.1 were validated, but not Sga3.1 and Sgr7.1 . In the bi-parental populations, Sga5.1 and Sga7.1 were mapped, but these were not identified with GWAS. The QTLs Sga1.1 , Sga7.1 , Sgr7.1 , and Sgr8.1 co-localize with genes GAME9, GAME 6/GAME 11 , SGT1 , and SGT2 , respectively. For other genes involved in SGA synthesis, no QTLs were identified. The results of this study illustrate a number of pitfalls in GWAS of which population structure seems the most important. We also show that introgression breeding for disease resistance has introduced new haplotypes to the gene pool involved in higher SGA levels in certain pedigrees. Finally, we show that high SGA levels remain unpredictable in potato but that α-solanine/α-chaconine ratio has a predictable outcome with specific SGT1 and SGT2 haplotypes., Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-022-01344-2., Competing Interests: Conflict of interestThe authors declare no competing interests., (© The Author(s), under exclusive licence to Springer Nature B.V. 2022. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

Motivation: Multi-parent populations (MPPs) are popular for QTL mapping because they combine wide genetic diversity in parents with easy control of population structure, but a limited number of software tools for QTL mapping are specifically developed for general MPP designs., Results: We developed an R package called statgenMPP, adopting a unified identity-by-descent (IBD)-based mixed model approach for QTL analysis in MPPs. The package offers easy-to-use functionalities of IBD calculations, mixed model solutions and visualizations for QTL mapping in a wide range of MPP designs, including diallele, nested-association mapping populations, multi-parent advanced genetic inter-cross populations and other complicated MPPs with known crossing schemes., Availability and Implementation: The R package statgenMPP is open-source and freely available on CRAN at https://CRAN.R-project.org/package=statgenMPP., Supplementary Information: Supplementary data are available at Bioinformatics online., (© The Author(s) 2022. Published by Oxford University Press.)

Key Message: We evaluate self-organizing maps (SOM) to identify adaptation zones and visualize multi-environment genotypic responses. We apply SOM to multiple traits and crop growth model output of large-scale European sunflower data. Genotype-by-environment interactions (G × E) complicate the selection of well-adapted varieties. A possible solution is to group trial locations into adaptation zones with G × E occurring mainly between zones. By selecting for good performance inside those zones, response to selection is increased. In this paper, we present a two-step procedure to identify adaptation zones that starts from a self-organizing map (SOM). In the SOM, trials across locations and years are assigned to groups, called units, that are organized on a two-dimensional grid. Units that are further apart contain more distinct trials. In an iterative process of reweighting trial contributions to units, the grid configuration is learnt simultaneously with the trial assignment to units. An aggregation of the units in the SOM by hierarchical clustering then produces environment types, i.e. trials with similar growing conditions. Adaptation zones can subsequently be identified by grouping trial locations with similar distributions of environment types across years. For the construction of SOMs, multiple data types can be combined. We compared environment types and adaptation zones obtained for European sunflower from quantitative traits like yield, oil content, phenology and disease scores with those obtained from environmental indices calculated with the crop growth model Sunflo. We also show how results are affected by input data organization and user-defined weights for genotypes and traits. Adaptation zones for European sunflower as identified by our SOM-based strategy captured substantial genotype-by-location interaction and pointed to trials in Spain, Turkey and South Bulgaria as inducing different genotypic responses., (© 2022. The Author(s).)

Hybrid potato breeding has become a novel alternative to conventional potato breeding allowing breeders to overcome intractable barriers (e.g. tetrasomic inheritance, masked deleterious alleles, obligate clonal propagation) with the benefit of seed-based propagule, flexible population design, and the potential of hybrid vigor. Until now, however, no formal inquiry has adequately examined the relevant genetic components for complex traits in hybrid potato populations. In this present study, we use a 2-step multivariate modeling approach to estimate the variance components to assess the magnitude of the general and specific combining abilities in diploid hybrid potato. Specific combining ability effects were identified for all yield components studied here warranting evidence of nonadditive genetic effects in hybrid potato yield. However, the estimated general combining ability effects were on average 2 times larger than their respective specific combining ability quantile across all yield phenotypes. Tuber number general combining abilities and specific combining abilities were found to be highly correlated with total yield's genetic components. Tuber volume was shown to have the largest proportion of additive and nonadditive genetic variation suggesting under-selection of this phenotype in this population. The prominence of additive effects found for all traits presents evidence that the mid-parent value alone is useful for hybrid potato evaluation. Heterotic vigor stands to be useful in bolstering simpler traits but this will be dependent on target phenotypes and market requirements. This study represents the first diallel analysis of its kind in diploid potato using material derived from a commercial hybrid breeding program., (© The Author(s) 2022. Published by Oxford University Press on behalf of Genetics Society of America.)

Key Message: The identity-by-descent (IBD)-based mixed model approach introduced in this study can detect quantitative trait loci (QTLs) referring to the parental origin and simultaneously account for multilevel relatedness of individuals within and across families. This unified approach is proved to be a powerful approach for all kinds of multiparental population (MPP) designs. Multiparental populations (MPPs) have become popular for quantitative trait loci (QTL) detection. Tools for QTL mapping in MPPs are mostly developed for specific MPPs and do not generalize well to other MPPs. We present an IBD-based mixed model approach for QTL mapping in all kinds of MPP designs, e.g., diallel, Nested Association Mapping (NAM), and Multiparental Advanced Generation Intercross (MAGIC) designs. The first step is to compute identity-by-descent (IBD) probabilities using a general Hidden Markov model framework, called reconstructing ancestry blocks bit by bit (RABBIT). Next, functions of IBD information are used as design matrices, or genetic predictors, in a mixed model approach to estimate variance components for multiallelic genetic effects associated with parents. Family-specific residual genetic effects are added, and a polygenic effect is structured by kinship relations between individuals. Case studies of simulated diallel, NAM, and MAGIC designs proved that the advanced IBD-based multi-QTL mixed model approach incorporating both kinship relations and family-specific residual variances (IBD.MQMkin_F) is robust across a variety of MPP designs and allele segregation patterns in comparison to a widely used benchmark association mapping method, and in most cases, outperformed or behaved at least as well as other tools developed for specific MPP designs in terms of mapping power and resolution. Successful analyses of real data cases confirmed the wide applicability of our IBD-based mixed model methodology., (© 2021. The Author(s).)

In the past decades, genomic prediction has had a large impact on plant breeding. Given the current advances of high-throughput phenotyping and sequencing technologies, it is increasingly common to observe a large number of traits, in addition to the target trait of interest. This raises the important question whether these additional or "secondary" traits can be used to improve genomic prediction for the target trait. With only a small number of secondary traits, this is known to be the case, given sufficiently high heritabilities and genetic correlations. Here we focus on the more challenging situation with a large number of secondary traits, which is increasingly common since the arrival of high-throughput phenotyping. In this case, secondary traits are usually incorporated through additional relatedness matrices. This approach is however infeasible when secondary traits are not measured on the test set, and cannot distinguish between genetic and non-genetic correlations. An alternative direction is to extend the classical selection indices using penalized regression. So far, penalized selection indices have not been applied in a genomic prediction setting, and require plot-level data in order to reliably estimate genetic correlations. Here we aim to overcome these limitations, using two novel approaches. Our first approach relies on a dimension reduction of the secondary traits, using either penalized regression or random forests (LS-BLUP/RF-BLUP). We then compute the bivariate GBLUP with the dimension reduction as secondary trait. For simulated data (with available plot-level data), we also use bivariate GBLUP with the penalized selection index as secondary trait (SI-BLUP). In our second approach (GM-BLUP), we follow existing multi-kernel methods but replace secondary traits by their genomic predictions, with the advantage that genomic prediction is also possible when secondary traits are only measured on the training set. For most of our simulated data, SI-BLUP was most accurate, often closely followed by RF-BLUP or LS-BLUP. In real datasets, involving metabolites in Arabidopsis and transcriptomics in maize, no method could substantially improve over univariate prediction when secondary traits were only available on the training set. LS-BLUP and RF-BLUP were most accurate when secondary traits were available also for the test set., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Arouisse, Theeuwen, van Eeuwijk and Kruijer.)

Much has been published on QTL detection for complex traits using bi-parental and multi-parental crosses (linkage analysis) or diversity panels (GWAS studies). While successful for detection, transferability of results to real applications has proven more difficult. Here, we combined a QTL detection approach using a pre-breeding populations which utilized intensive phenotypic selection for the target trait across multiple plant generations, combined with rapid generation turnover (i.e. "speed breeding") to allow cycling of multiple plant generations each year. The reasoning is that QTL mapping information would complement the selection process by identifying the genome regions under selection within the relevant germplasm. Questions to answer were the location of the genomic regions determining response to selection and the origin of the favourable alleles within the pedigree. We used data from a pre-breeding program that aimed at pyramiding different resistance sources to Fusarium crown rot into elite (but susceptible) wheat backgrounds. The population resulted from a complex backcrossing scheme involving multiple resistance donors and multiple elite backgrounds, akin to a MAGIC population (985 genotypes in total, with founders, and two major offspring layers within the pedigree). A significant increase in the resistance level was observed (i.e. a positive response to selection) after the selection process, and 17 regions significantly associated with that response were identified using a GWAS approach. Those regions included known QTL as well as potentially novel regions contributing resistance to Fusarium crown rot. In addition, we were able to trace back the sources of the favourable alleles for each QTL. We demonstrate that QTL detection using breeding populations under selection for the target trait can identify QTL controlling the target trait and that the frequency of the favourable alleles was increased as a response to selection, thereby validating the QTL detected. This is a valuable opportunistic approach that can provide QTL information that is more easily transferred to breeding applications.

Genetic variance of a phenotypic trait can originate from direct genetic effects, or from indirect effects, i.e. , through genetic effects on other traits, affecting the trait of interest. This distinction is often of great importance, for example, when trying to improve crop yield and simultaneously control plant height. As suggested by Sewall Wright, assessing contributions of direct and indirect effects requires knowledge of (1) the presence or absence of direct genetic effects on each trait, and (2) the functional relationships between the traits. Because experimental validation of such relationships is often unfeasible, it is increasingly common to reconstruct them using causal inference methods. However, most current methods require all genetic variance to be explained by a small number of quantitative trait loci (QTL) with fixed effects. Only a few authors have considered the "missing heritability" case, where contributions of many undetectable QTL are modeled with random effects. Usually, these are treated as nuisance terms that need to be eliminated by taking residuals from a multi-trait mixed model (MTM). But fitting such an MTM is challenging, and it is impossible to infer the presence of direct genetic effects. Here, we propose an alternative strategy, where genetic effects are formally included in the graph. This has important advantages: (1) genetic effects can be directly incorporated in causal inference, implemented via our PCgen algorithm, which can analyze many more traits; and (2) we can test the existence of direct genetic effects, and improve the orientation of edges between traits. Finally, we show that reconstruction is much more accurate if individual plant or plot data are used, instead of genotypic means. We have implemented the PCgen-algorithm in the R-package pcgen., (Copyright © 2020 by the Genetics Society of America.)

Background: In nutritional epidemiology, dealing with confounding and complex internutrient relations are major challenges. An often-used approach is dietary pattern analyses, such as principal component analysis, to deal with internutrient correlations, and to more closely resemble the true way nutrients are consumed. However, despite these improvements, these approaches still require subjective decisions in the preselection of food groups. Moreover, they do not make efficient use of multivariate dietary data, because they detect only marginal associations. We propose the use of copula graphical models (CGMs) to model and make statistical inferences regarding complex associations among variables in multivariate data, where associations between all variables can be learned simultaneously., Objective: We aimed to reconstruct nutritional intake and physical functioning networks in Dutch older adults by applying a CGM., Methods: We addressed this issue by uncovering the pairwise associations between variables while correcting for the effect of remaining variables. More specifically, we used a CGM to infer the precision matrix, which contains all the conditional independence relations between nodes in the graph. The nonzero elements of the precision matrix indicate the presence of a direct association. We applied this method to reconstruct nutrient-physical functioning networks from the combined data of 4 studies (Nu-Age, ProMuscle, ProMO, and V-Fit, total n = 662, mean ± SD age = 75 ± 7 y). The method was implemented in the R package nutriNetwork which is freely available at https://cran.r-project.org/web/packages/nutriNetwork., Results: Greater intakes of vegetable protein and vitamin B-6 were partially correlated with higher scores on the total Short Physical Performance Battery (SPPB) and the chair rise test. Greater intakes of vitamin B-12 and folate were partially correlated with higher scores on the chair rise test and the total SPPB, respectively., Conclusions: We determined that vegetable protein, vitamin B-6, folate, and vitamin B-12 intakes are partially correlated with improved functional outcome measurements in Dutch older adults., (Copyright © The Author(s) 2019.)

Key Message: Multi-environment models using marker-based kinship information for both additive and dominance effects can accurately predict hybrid performance in different environments. Sorghum is an important hybrid crop that is grown extensively in many subtropical and tropical regions including Northern NSW and Queensland in Australia. The highly varying weather patterns in the Australian summer months mean that sorghum hybrids exhibit a great deal of variation in yield between locations. To ultimately enable prediction of the outcome of crossing parental lines, both additive effects on yield performance and dominance interaction effects need to be characterised. This paper demonstrates that fitting a linear mixed model that includes both types of effects calculated using genetic markers in relationship matrices improves predictions. Genotype by environment interactions was investigated by comparing FA1 (single-factor analytic) and FA2 (two-factor analytic) structures. The G×E causes a change in hybrid rankings between trials with a difference of up to 25% of the hybrids in the top 10% of each trial. The prediction accuracies increased with the addition of the dominance term (over and above that achieved with an additive effect alone) by an average of 15% and a maximum of 60%. The percentage of dominance of the total genetic variance varied between trials with the trials with higher broad-sense heritability having the greater percentage of dominance. The inclusion of dominance in the factor analytic models improves the accuracy of the additive effects. Breeders selecting high yielding parents for crossing need to be aware of effects due to environment and dominance.

Genotype by environment interaction (G×E) for the target trait, e.g. yield, is an emerging property of agricultural systems and results from the interplay between a hierarchy of secondary traits involving the capture and allocation of environmental resources during the growing season. This hierarchy of secondary traits ranges from basic traits that correspond to response mechanisms/sensitivities, to intermediate traits that integrate a larger number of processes over time and therefore show a larger amount of G×E. Traits underlying yield differ in their contribution to adaptation across environmental conditions and have different levels of G×E. Here, we provide a framework to study the performance of genotype to phenotype (G2P) modeling approaches. We generate and analyze response surfaces, or adaptation landscapes, for yield and yield related traits, emphasizing the organization of the traits in a hierarchy and their development and interactions over time. We use the crop growth model APSIM-wheat with genotype-dependent parameters as a tool to simulate non-linear trait responses over time with complex trait dependencies and apply it to wheat crops in Australia. For biological realism, APSIM parameters were given a genetic basis of 300 QTLs sampled from a gamma distribution whose shape and rate parameters were estimated from real wheat data. In the simulations, the hierarchical organization of the traits and their interactions over time cause G×E for yield even when underlying traits do not show G×E. Insight into how G×E arises during growth and development helps to improve the accuracy of phenotype predictions within and across environments and to optimize trial networks. We produced a tangible simulated adaptation landscape for yield that we first investigated for its biological credibility by statistical models for G×E that incorporate genotypic and environmental covariables. Subsequently, the simulated trait data were used to evaluate statistical genotype-to-phenotype models for multiple traits and environments and to characterize relationships between traits over time and across environments, as a way to identify traits that could be useful to select for specific adaptation. Designed appropriately, these types of simulated landscapes might also serve as a basis to train other, more deep learning methodologies in order to transfer such network models to real-world situations., (Copyright © 2019 Bustos-Korts, Malosetti, Chenu, Chapman, Boer, Zheng and van Eeuwijk.)

Genomic prediction of complex traits, say yield, benefits from including information on correlated component traits. Statistical criteria to decide which yield components to consider in the prediction model include the heritability of the component traits and their genetic correlation with yield. Not all component traits are easy to measure. Therefore, it may be attractive to include proxies to yield components, where these proxies are measured in (high-throughput) phenotyping platforms during the growing season. Using the Agricultural Production Systems Simulator (APSIM)-wheat cropping systems model, we simulated phenotypes for a wheat diversity panel segregating for a set of physiological parameters regulating phenology, biomass partitioning, and the ability to capture environmental resources. The distribution of the additive quantitative trait locus effects regulating the APSIM physiological parameters approximated the same distribution of quantitative trait locus effects on real phenotypic data for yield and heading date. We use the crop growth model APSIM-wheat to simulate phenotypes in three Australian environments with contrasting water deficit patterns. The APSIM output contained the dynamics of biomass and canopy cover, plus yield at the end of the growing season. Each water deficit pattern triggered different adaptive mechanisms and the impact of component traits differed between drought scenarios. We evaluated multiple phenotyping schedules by adding plot and measurement error to the dynamics of biomass and canopy cover. We used these trait dynamics to fit parametric models and P-splines to extract parameters with a larger heritability than the phenotypes at individual time points. We used those parameters in multi-trait prediction models for final yield. The combined use of crop growth models and multi-trait genomic prediction models provides a procedure to assess the efficiency of phenotyping strategies and compare methods to model trait dynamics. It also allows us to quantify the impact of yield components on yield prediction accuracy even in different environment types. In scenarios with mild or no water stress, yield prediction accuracy benefitted from including biomass and green canopy cover parameters. The advantage of the multi-trait model was smaller for the early-drought scenario, due to the reduced correlation between the secondary and the target trait. Therefore, multi-trait genomic prediction models for yield require scenario-specific correlated traits., (Copyright © 2019 Bustos-Korts, Boer, Malosetti, Chapman, Chenu, Zheng and van Eeuwijk.)

Significance testing for genome-wide association study (GWAS) with increasing SNP density up to whole-genome sequence data (WGS) is not straightforward, because of strong LD between SNP and population stratification. Therefore, the objective of this study was to investigate genomic control and different significance testing procedures using data from a commercial pig breeding scheme. A GWAS was performed in GCTA with data of 4,964 Large White pigs using medium density, high density or imputed whole-genome sequence data, fitting a genomic relationship matrix based on a leave-one-chromosome-out approach to account for population structure. Subsequently, genomic inflation factors were assessed on whole-genome level and the chromosome level. To establish a significance threshold, permutation testing, Bonferroni corrections using either the total number of SNPs or the number of independent chromosome fragments, and false discovery rates (FDR) using either the Benjamini-Hochberg procedure or the Benjamini and Yekutieli procedure were evaluated. We found that genomic inflation factors did not differ between different density genotypes but do differ between chromosomes. Also, the leave-one-chromosome-out approach for GWAS or using the pedigree relationships did not account appropriately for population stratification and gave strong genomic inflation. Regarding different procedures for significance testing, when the aim is to find QTL regions that are associated with a trait of interest, we recommend applying the FDR following the Benjamini and Yekutieli approach to establish a significance threshold that is adjusted for multiple testing. When the aim is to pinpoint a specific mutation, the more conservative Bonferroni correction based on the total number of SNPs is more appropriate, till an appropriate method is established to adjust for the number of independent tests., (© 2019 The Authors. Journal of Animal Breeding and Genetics Published by Blackwell Verlag GmbH.)

Broadening the genetic base of crops is crucial for developing varieties to respond to global agricultural challenges such as climate change. Here, we analysed a diverse panel of 371 domesticated lines of the model crop barley to explore the genetics of crop adaptation. We first collected exome sequence data and phenotypes of key life history traits from contrasting multi-environment common garden trials. Then we applied refined statistical methods, including some based on exomic haplotype states, for genotype-by-environment (G×E) modelling. Sub-populations defined from exomic profiles were coincident with barley's biology, geography and history, and explained a high proportion of trial phenotypic variance. Clear G×E interactions indicated adaptation profiles that varied for landraces and cultivars. Exploration of circadian clock-related genes, associated with the environmentally adaptive days to heading trait (crucial for the crop's spread from the Fertile Crescent), illustrated complexities in G×E effect directions, and the importance of latitudinally based genic context in the expression of large-effect alleles. Our analysis supports a gene-level scientific understanding of crop adaption and leads to practical opportunities for crop improvement, allowing the prioritisation of genomic regions and particular sets of lines for breeding efforts seeking to cope with climate change and other stresses., (© 2019 The Authors. The Plant Journal published by John Wiley & Sons Ltd and Society for Experimental Biology.)

Construction of genetic linkage maps has become a routine step for mapping quantitative trait loci (QTL), particularly in animal and plant breeding populations. Many multiparental populations have recently been produced to increase genetic diversity and QTL mapping resolution. However, few software packages are available for map construction in these populations. In this paper, we build a general framework for the construction of genetic linkage maps from genotypic data in diploid populations, including bi- and multiparental populations, cross-pollinated (CP) populations, and breeding pedigrees. The framework is implemented as an automatic pipeline called magicMap, where the maximum multilocus likelihood approach utilizes genotypic information efficiently. We evaluate magicMap by extensive simulations and eight real datasets: one biparental, one CP, four multiparent advanced generation intercross (MAGIC), and two nested association mapping (NAM) populations, the number of markers ranging from a few hundred to tens of thousands. Not only is magicMap the only software capable of accommodating all of these designs, it is more accurate and robust to missing genotypes and genotyping errors than commonly used packages., (Copyright © 2019 by the Genetics Society of America.)

Grain yield and stay-green drought adaptation trait are important targets of selection in grain sorghum breeding for broad adaptation to a range of environments. Genomic prediction for these traits may be enhanced by joint multi-trait analysis. The objectives of this study were to assess the capacity of multi-trait models to improve genomic prediction of parental breeding values for grain yield and stay-green in sorghum by using information from correlated auxiliary traits, and to determine the combinations of traits that optimize predictive results in specific scenarios. The dataset included phenotypic performance of 2645 testcross hybrids across 26 environments as well as genomic and pedigree information on their female parental lines. The traits considered were grain yield (GY), stay-green (SG), plant height (PH), and flowering time (FT). We evaluated the improvement in predictive performance of multi-trait G-BLUP models relative to single-trait G-BLUP. The use of a blended kinship matrix exploiting pedigree and genomic information was also explored to optimize multi-trait predictions. Predictive ability for GY increased up to 16% when PH information on the training population was exploited through multi-trait genomic analysis. For SG prediction, full advantage from multi-trait G-BLUP was obtained only when GY information was also available on the predicted lines per se , with predictive ability improvements of up to 19%. Predictive ability, unbiasedness and accuracy of predictions from conventional multi-trait G-BLUP were further optimized by using a combined pedigree-genomic relationship matrix. Results of this study suggest that multi-trait genomic evaluation combining routinely measured traits may be used to improve prediction of crop productivity and drought adaptability in grain sorghum.

Key Message: The use of a kinship matrix integrating pedigree- and marker-based relationships optimized the performance of genomic prediction in sorghum, especially for traits of lower heritability. Selection based on genome-wide markers has become an active breeding strategy in crops. Genomic prediction models can make use of pedigree information to account for the residual polygenic effects not captured by markers. Our aim was to evaluate the impact of using pedigree and genomic information on prediction quality of breeding values for different traits in sorghum. We explored BLUP models that use weighted combinations of pedigree and genomic relationship matrices. The optimal weighting factor was empirically determined in order to maximize predictive ability after evaluating a range of candidate weights. The phenotypic data consisted of testcross evaluations of sorghum parental lines across multiple environments. All lines were genotyped, and full pedigree information was available. The performance of the best predictive combined matrix was compared to that of models fitting the component matrices independently. Model performance was assessed using cross-validation technique. Fitting a combined pedigree-genomic matrix with the optimal weight always yielded the largest increases in predictive ability and the largest reductions in prediction bias relative to the simple G-BLUP. However, the weight that optimized prediction varied across traits. The benefits of including pedigree information in the genomic model were more relevant for traits with lower heritability, such as grain yield and stay-green. Our results suggest that the combination of pedigree and genomic relatedness can be used to optimize predictions of complex traits in crops when the additive variation is not fully explained by markers.

New types of phenotyping tools generate large amounts of data on many aspects of plant physiology and morphology with high spatial and temporal resolution. These new phenotyping data are potentially useful to improve understanding and prediction of complex traits, like yield, that are characterized by strong environmental context dependencies, i.e., genotype by environment interactions. For an evaluation of the utility of new phenotyping information, we will look at how this information can be incorporated in different classes of genotype-to-phenotype (G2P) models. G2P models predict phenotypic traits as functions of genotypic and environmental inputs. In the last decade, access to high-density single nucleotide polymorphism markers (SNPs) and sequence information has boosted the development of a class of G2P models called genomic prediction models that predict phenotypes from genome wide marker profiles. The challenge now is to build G2P models that incorporate simultaneously extensive genomic information alongside with new phenotypic information. Beyond the modification of existing G2P models, new G2P paradigms are required. We present candidate G2P models for the integration of genomic and new phenotyping information and illustrate their use in examples. Special attention will be given to the modelling of genotype by environment interactions. The G2P models provide a framework for model based phenotyping and the evaluation of the utility of phenotyping information in the context of breeding programs., (Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Use of whole-genome sequence data (WGS) is expected to improve identification of quantitative trait loci (QTL). However, this requires imputation to WGS, often with a limited number of sequenced animals for the target population. The objective of this study was to investigate imputation to WGS in two pig lines using a multi-line reference population and, subsequently, to investigate the effect of using these imputed WGS (iWGS) for GWAS., Methods: Phenotypes and genotypes were available on 12,184 Large White pigs (LW-line) and 4943 Dutch Landrace pigs (DL-line). Imputed 660 K and 80 K genotypes for the LW-line and DL-line, respectively, were imputed to iWGS using Beagle v.4.1. Since only 32 LW-line and 12 DL-line boars were sequenced, 142 animals from eight commercial lines were added. GWAS were performed for each line using the 80 K and 660 K SNPs, the genotype scores of iWGS SNPs that had an imputation accuracy (Beagle R 2 ) higher than 0.6, and the dosage scores of all iWGS SNPs., Results: For the DL-line (LW-line), imputation of 80 K genotypes to iWGS resulted in an average Beagle R 2 of 0.39 (0.49). After quality control, 2.5 × 10 6 (3.5 × 10 6 ) SNPs had a Beagle R 2 higher than 0.6, resulting in an average Beagle R 2 of 0.83 (0.93). Compared to the 80 K and 660 K genotypes, using iWGS led to the identification of 48.9 and 64.4% more QTL regions, for the DL-line and LW-line, respectively, and the most significant SNPs in the QTL regions explained a higher proportion of phenotypic variance. Using dosage instead of genotype scores improved the identification of QTL, because the model accounted for uncertainty of imputation, and all SNPs were used in the analysis., Conclusions: Imputation to WGS using the multi-line reference population resulted in relatively poor imputation, especially when imputing from 80 K (DL-line). In spite of the poor imputation accuracies, using iWGS instead of a lower density SNP chip increased the number of detected QTL and the estimated proportion of phenotypic variance explained by these QTL, especially when dosage scores were used instead of genotype scores. Thus, iWGS, even with poor imputation accuracy, can be used to identify possible interesting regions for fine mapping.

Hybrid vigour, or heterosis, has been of tremendous importance in agriculture for the improvement of both crops and livestock. Notwithstanding large efforts to study the phenomenon of heterosis in the last decades, the identification of common molecular mechanisms underlying hybrid vigour remain rare. Here, we conducted a systematic survey of the degree of heterosis in Arabidopsis thaliana hybrids. For this purpose, two overlapping Arabidopsis hybrid populations were generated by crossing a large collection of naturally occurring accessions to two common reference lines. In these Arabidopsis hybrid populations the range of heterosis for several developmental and yield related traits was examined, and the relationship between them was studied. The traits under study were projected leaf area at 17 days after sowing, flowering time, height of the main inflorescence, number of side branches from the main stem or from the rosette base, total seed yield, seed weight, seed size and the estimated number of seeds per plant. Predominantly positive heterosis was observed for leaf area and height of the main inflorescence, whereas mainly negative heterosis was observed for rosette branching. For the other traits both positive and negative heterosis was observed in roughly equal amounts. For flowering time and seed size only low levels of heterosis were detected. In general the observed heterosis levels were highly trait specific. Furthermore, no correlation was observed between heterosis levels and the genetic distance between the parental lines. Since all selected lines were a part of the Arabidopsis genome wide association (GWA) mapping panel, a genetic mapping approach was applied to identify possible regions harbouring genetic factors causal for heterosis, with separate calculations for additive and dominance effects. Our study showed that the genetic mechanisms underlying heterosis were highly trait specific in our hybrid populations and greatly depended on the genetic background, confirming the elusive character of heterosis., Competing Interests: The authors have declared that no competing interests exist.

The study of gene flow in pedigrees is of strong interest for the development of quantitative trait loci (QTL) mapping methods in multiparental populations. We developed a Markovian framework for modeling ancestral origins along two homologous chromosomes within individuals in fixed pedigrees. A highly beneficial property of our method is that the size of state space depends linearly or quadratically on the number of pedigree founders, whereas this increases exponentially with pedigree size in alternative methods. To calculate the parameter values of the Markov process, we describe two novel recursive algorithms that differ with respect to the pedigree founders being assumed to be exchangeable or not. Our algorithms apply equally to autosomes and sex chromosomes, another desirable feature of our approach. We tested the accuracy of the algorithms by a million simulations on a pedigree. We demonstrated two applications of the recursive algorithms in multiparental populations: design a breeding scheme for maximizing the overall density of recombination breakpoints and thus the QTL mapping resolution, and incorporate pedigree information into hidden Markov models in ancestral inference from genotypic data; the conditional probabilities and the recombination breakpoint data resulting from ancestral inference can facilitate follow-up QTL mapping. The results show that the generality of the recursive algorithms can greatly increase the application range of genetic analysis such as ancestral inference in multiparental populations., (Copyright © 2018 Zheng et al.)

Many different types of multiparental populations have recently been produced to increase genetic diversity and resolution in QTL mapping. Low-coverage, genotyping-by-sequencing (GBS) technology has become a cost-effective tool in these populations, despite large amounts of missing data in offspring and founders. In this work, we present a general statistical framework for genotype imputation in such experimental crosses from low-coverage GBS data. Generalizing a previously developed hidden Markov model for calculating ancestral origins of offspring DNA, we present an imputation algorithm that does not require parental data and that is applicable to bi- and multiparental populations. Our imputation algorithm allows heterozygosity of parents and offspring as well as error correction in observed genotypes. Further, our approach can combine imputation and genotype calling from sequencing reads, and it also applies to called genotypes from SNP array data. We evaluate our imputation algorithm by simulated and real data sets in four different types of populations: the F 2 , the advanced intercross recombinant inbred lines, the multiparent advanced generation intercross, and the cross-pollinated population. Because our approach uses marker data and population design information efficiently, the comparisons with previous approaches show that our imputation is accurate at even very low ([Formula: see text]) sequencing depth, in addition to having accurate genotype phasing and error detection., (Copyright © 2018 by the Genetics Society of America.)

Exploiting genetic variation for more efficient photosynthesis is an underexplored route towards new crop varieties. This study demonstrates the genetic dissection of higher plant photosynthesis efficiency down to the genomic DNA level, by confirming that allelic sequence variation at the Arabidopsis thaliana YELLOW SEEDLING1 (YS1) gene explains natural diversity in photosynthesis acclimation to high irradiance. We use a genome-wide association study to identify quantitative trait loci (QTLs) involved in the Arabidopsis photosynthetic acclimation response. Candidate genes underlying the QTLs are prioritized according to functional clues regarding gene ontology, expression and function. Reverse genetics and quantitative complementation confirm the candidacy of YS1, which encodes a pentatrico-peptide-repeat (PPR) protein involved in RNA editing of plastid-encoded genes (anterograde signalling). Gene expression analysis and allele sequence comparisons reveal polymorphisms in a light-responsive element in the YS1 promoter that affect its expression, and that of its downstream targets, resulting in the variation in photosynthetic acclimation.

Key Message: A flexible and user-friendly spatial method called SpATS performed comparably to more elaborate and trial-specific spatial models in a series of sorghum breeding trials. Adjustment for spatial trends in plant breeding field trials is essential for efficient evaluation and selection of genotypes. Current mixed model methods of spatial analysis are based on a multi-step modelling process where global and local trends are fitted after trying several candidate spatial models. This paper reports the application of a novel spatial method that accounts for all types of continuous field variation in a single modelling step by fitting a smooth surface. The method uses two-dimensional P-splines with anisotropic smoothing formulated in the mixed model framework, referred to as SpATS model. We applied this methodology to a series of large and partially replicated sorghum breeding trials. The new model was assessed in comparison with the more elaborate standard spatial models that use autoregressive correlation of residuals. The improvements in precision and the predictions of genotypic values produced by the SpATS model were equivalent to those obtained using the best fitting standard spatial models for each trial. One advantage of the approach with SpATS is that all patterns of spatial trend and genetic effects were modelled simultaneously by fitting a single model. Furthermore, we used a flexible model to adequately adjust for field trends. This strategy reduces potential parameter identification problems and simplifies the model selection process. Therefore, the new method should be considered as an efficient and easy-to-use alternative for routine analyses of plant breeding trials.

Key Message: Probabilistic graphical models show great potential for robust and reliable construction of linkage maps. We show how to use probabilistic graphical models to construct high-quality linkage maps in the face of data perturbations caused by genotyping errors and reciprocal translocations. It has been shown that linkage map construction can be hampered by the presence of genotyping errors and chromosomal rearrangements such as inversions and translocations. Here, we report a novel method for linkage map construction using probabilistic graphical models. The method is proven, both theoretically and practically, to be effective in filtering out markers that contain genotyping errors. In particular, it carries out marker filtering and ordering simultaneously, and is therefore superior to the standard post hoc filtering using nearest-neighbour stress. Furthermore, we demonstrate empirically that the proposed method offers a promising solution to linkage map construction in the case of a reciprocal translocation., Competing Interests: The authors declare that they have no conflicts of interest.

Plants are exposed to combinations of various biotic and abiotic stresses, but stress responses are usually investigated for single stresses only. Here, we investigated the genetic architecture underlying plant responses to 11 single stresses and several of their combinations by phenotyping 350 Arabidopsis thaliana accessions. A set of 214 000 single nucleotide polymorphisms (SNPs) was screened for marker-trait associations in genome-wide association (GWA) analyses using tailored multi-trait mixed models. Stress responses that share phytohormonal signaling pathways also share genetic architecture underlying these responses. After removing the effects of general robustness, for the 30 most significant SNPs, average quantitative trait locus (QTL) effect sizes were larger for dual stresses than for single stresses. Plants appear to deploy broad-spectrum defensive mechanisms influencing multiple traits in response to combined stresses. Association analyses identified QTLs with contrasting and with similar responses to biotic vs abiotic stresses, and below-ground vs above-ground stresses. Our approach allowed for an unprecedented comprehensive genetic analysis of how plants deal with a wide spectrum of stress conditions., (© 2016 The Authors. New Phytologist © 2016 New Phytologist Trust.)

Key Message: The number of SNPs required for QTL discovery is justified by the distance at which linkage disequilibrium has decayed. Simulations and real potato SNP data showed how to estimate and interpret LD decay. The magnitude of linkage disequilibrium (LD) and its decay with genetic distance determine the resolution of association mapping, and are useful for assessing the desired numbers of SNPs on arrays. To study LD and LD decay in tetraploid potato, we simulated autotetraploid genotypes and used it to explore the dependence on: (1) the number of haplotypes in the population (the amount of genetic variation) and (2) the percentage of haplotype specific SNPs (hs-SNPs). Several estimators for short-range LD were explored, such as the average r 2 , median r 2 , and other percentiles of r 2 (80, 90, and 95 %). For LD decay, we looked at LD ½,90 , the distance at which the short-range LD is halved when using the 90 % percentile of r 2 at short range, as estimator for LD. Simulations showed that the performance of various estimators for LD decay strongly depended on the number of haplotypes, although the real value of LD decay was not influenced very much by this number. The estimator LD ½,90 was chosen to evaluate LD decay in 537 tetraploid varieties. LD ½,90 values were 1.5 Mb for varieties released before 1945 and 0.6 Mb in varieties released after 2005. LD ½,90 values within three different subpopulations ranged from 0.7 to 0.9 Mb. LD ½,90 was 2.5 Mb for introgressed regions, indicating large haplotype blocks. In pericentromeric heterochromatin, LD decay was negligible. This study demonstrates that several related factors influencing LD decay could be disentangled, that no universal approach can be suggested, and that the estimation of LD decay has to be performed with great care and knowledge of the sampled material., Competing Interests: The authors declare that they have no conflict of interest.

Background: Measurement error in self-reported dietary intakes is known to bias the association between dietary intake and a health outcome of interest such as risk of a disease. The association can be distorted further by mismeasured confounders, leading to invalid results and conclusions. It is, however, difficult to adjust for the bias in the association when there is no internal validation data., Methods: We proposed a method to adjust for the bias in the diet-disease association (hereafter, association), due to measurement error in dietary intake and a mismeasured confounder, when there is no internal validation data. The method combines prior information on the validity of the self-report instrument with the observed data to adjust for the bias in the association. We compared the proposed method with the method that ignores the confounder effect, and with the method that ignores measurement errors completely. We assessed the sensitivity of the estimates to various magnitudes of measurement error, error correlations and uncertainty in the literature-reported validation data. We applied the methods to fruits and vegetables (FV) intakes, cigarette smoking (confounder) and all-cause mortality data from the European Prospective Investigation into Cancer and Nutrition study., Results: Using the proposed method resulted in about four times increase in the strength of association between FV intake and mortality. For weakly correlated errors, measurement error in the confounder minimally affected the hazard ratio estimate for FV intake. The effect was more pronounced for strong error correlations., Conclusions: The proposed method permits sensitivity analysis on measurement error structures and accounts for uncertainties in the reported validity coefficients. The method is useful in assessing the direction and quantifying the magnitude of bias in the association due to measurement errors in the confounders.

Dietary questionnaires are prone to measurement error, which bias the perceived association between dietary intake and risk of disease. Short-term measurements are required to adjust for the bias in the association. For foods that are not consumed daily, the short-term measurements are often characterized by excess zeroes. Via a simulation study, the performance of a two-part calibration model that was developed for a single-replicate study design was assessed by mimicking leafy vegetable intake reports from the multicenter European Prospective Investigation into Cancer and Nutrition (EPIC) study. In part I of the fitted two-part calibration model, a logistic distribution was assumed; in part II, a gamma distribution was assumed. The model was assessed with respect to the magnitude of the correlation between the consumption probability and the consumed amount (hereafter, cross-part correlation), the number and form of covariates in the calibration model, the percentage of zero response values, and the magnitude of the measurement error in the dietary intake. From the simulation study results, transforming the dietary variable in the regression calibration to an appropriate scale was found to be the most important factor for the model performance. Reducing the number of covariates in the model could be beneficial, but was not critical in large-sample studies. The performance was remarkably robust when fitting a one-part rather than a two-part model. The model performance was minimally affected by the cross-part correlation., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Aluminum (Al) toxicity damages plant roots and limits crop production on acid soils, which comprise up to 50% of the world's arable lands. A major Al tolerance locus on chromosome 3, AltSB, controls aluminum tolerance in sorghum [Sorghum bicolor (L.) Moench] via SbMATE, an Al-activated plasma membrane transporter that mediates Al exclusion from sensitive regions in the root apex. As is the case with other known Al tolerance genes, SbMATE was cloned based on studies conducted under controlled environmental conditions, in nutrient solution. Therefore, its impact on grain yield on acid soils remains undetermined. To determine the real world impact of SbMATE, multi-trait quantitative trait loci (QTL) mapping in hydroponics, and, in the field, revealed a large-effect QTL colocalized with the Al tolerance locus AltSB, where SbMATE lies, conferring a 0.6 ton ha(-1) grain yield increase on acid soils. A second QTL for Al tolerance in hydroponics, where the positive allele was also donated by the Al tolerant parent, SC283, was found on chromosome 9, indicating the presence of distinct Al tolerance genes in the sorghum genome, or genes acting in the SbMATE pathway leading to Al-activated citrate release. There was no yield penalty for AltSB, consistent with the highly localized Al regulated SbMATE expression in the root tip, and Al-dependent transport activity. A female effect of 0.5 ton ha(-1) independently demonstrated the effectiveness of AltSB in hybrids. Al tolerance conferred by AltSB is thus an indispensable asset for sorghum production and food security on acid soils, many of which are located in developing countries., (Copyright © 2016 Carvalho et al.)

Background: In contrast to currently used single nucleotide polymorphism (SNP) panels, the use of whole-genome sequence data is expected to enable the direct estimation of the effects of causal mutations on a given trait. This could lead to higher reliabilities of genomic predictions compared to those based on SNP genotypes. Also, at each generation of selection, recombination events between a SNP and a mutation can cause decay in reliability of genomic predictions based on markers rather than on the causal variants. Our objective was to investigate the use of imputed whole-genome sequence genotypes versus high-density SNP genotypes on (the persistency of) the reliability of genomic predictions using real cattle data., Methods: Highly accurate phenotypes based on daughter performance and Illumina BovineHD Beadchip genotypes were available for 5503 Holstein Friesian bulls. The BovineHD genotypes (631,428 SNPs) of each bull were used to impute whole-genome sequence genotypes (12,590,056 SNPs) using the Beagle software. Imputation was done using a multi-breed reference panel of 429 sequenced individuals. Genomic estimated breeding values for three traits were predicted using a Bayesian stochastic search variable selection (BSSVS) model and a genome-enabled best linear unbiased prediction model (GBLUP). Reliabilities of predictions were based on 2087 validation bulls, while the other 3416 bulls were used for training., Results: Prediction reliabilities ranged from 0.37 to 0.52. BSSVS performed better than GBLUP in all cases. Reliabilities of genomic predictions were slightly lower with imputed sequence data than with BovineHD chip data. Also, the reliabilities tended to be lower for both sequence data and BovineHD chip data when relationships between training animals were low. No increase in persistency of prediction reliability using imputed sequence data was observed., Conclusions: Compared to BovineHD genotype data, using imputed sequence data for genomic prediction produced no advantage. To investigate the putative advantage of genomic prediction using (imputed) sequence data, a training set with a larger number of individuals that are distantly related to each other and genomic prediction models that incorporate biological information on the SNPs or that apply stricter SNP pre-selection should be considered.

In the last decade cheaper and faster sequencing methods have resulted in an enormous increase in genomic data. High throughput genotyping, genotyping by sequencing and genomic breeding are becoming a standard in plant breeding. As a result, the collection of phenotypic data is increasingly becoming a limiting factor in plant breeding. Genetic studies on root traits are being hampered by the complexity of these traits and the inaccessibility of the rhizosphere. With an increasing interest in phenotyping, breeders and scientists try to overcome these limitations, resulting in impressive developments in automated phenotyping platforms. Recently, many such platforms have been thoroughly described, yet their efficiency to increase genetic gain often remains undiscussed. This efficiency depends on the heritability of the phenotyped traits as well as the correlation of these traits with agronomically relevant breeding targets. This review provides an overview of the latest developments in root phenotyping and describes the environmental and genetic factors influencing root phenotype and heritability. It also intends to give direction to future phenotyping and breeding strategies for optimizing root system functioning. A quantitative framework to determine the efficiency of phenotyping platforms for genetic gain is described. By increasing heritability, managing effects caused by interactions between genotype and environment and by quantifying the genetic relation between traits phenotyped in platforms and ultimate breeding targets, phenotyping platforms can be utilized to their maximum potential., (© The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

We present a general hidden Markov model framework called R: econstructing A: ncestry B: locks BIT: by bit (RABBIT) for reconstructing genome ancestry blocks from single-nucleotide polymorphism (SNP) array data, a required step for quantitative trait locus (QTL) mapping. The framework can be applied to a wide range of mapping populations such as the Arabidopsis multiparent advanced generation intercross (MAGIC), the mouse Collaborative Cross (CC), and the diversity outcross (DO) for both autosomes and X chromosomes if they exist. The model underlying RABBIT accounts for the joint pattern of recombination breakpoints between two homologous chromosomes and missing data and allelic typing errors in the genotype data of both sampled individuals and founders. Studies on simulated data of the MAGIC and the CC and real data of the MAGIC, the DO, and the CC demonstrate that RABBIT is more robust and accurate in reconstructing recombination bin maps than some commonly used methods., (Copyright © 2015 by the Genetics Society of America.)

High-throughput automated plant phenotyping has recently received a lot of attention. Leaf area is an important characteristic in understanding plant performance, but time-consuming and destructive to measure accurately. In this research, we describe a method to use a histogram of image intensities to automatically measure plant leaf area of tall pepper (Capsicum annuum L.) plants in the greenhouse. With a device equipped with several cameras, images of plants were recorded at 5-cm intervals over a height of 3m, at a recording distance of less than 60cm. The images were reduced to a small set of principal components that defined the design matrix in a regression model for predicting manually measured leaf area as obtained from destructive harvesting. These regression calibrations were performed for six different developmental times. In addition, development of leaf area was investigated by fitting linear relations between predicted leaf area and time, with special attention given to the genotype by time interaction and its genetic basis in the form of quantitative trait loci (QTLs). The experiment comprised parents, F1 progeny and eight genotypes of a recombinant inbred population of pepper. Although the current trial contained a limited number of genotypes, an earlier identified QTL related to leaf area growth could be confirmed. Therefore, image analysis, as presented in this paper, provides a powerful and efficient way to study and identify the genetic basis of growth and developmental processes in plants.

Heritability is a central parameter in quantitative genetics, from both an evolutionary and a breeding perspective. For plant traits heritability is traditionally estimated by comparing within- and between-genotype variability. This approach estimates broad-sense heritability and does not account for different genetic relatedness. With the availability of high-density markers there is growing interest in marker-based estimates of narrow-sense heritability, using mixed models in which genetic relatedness is estimated from genetic markers. Such estimates have received much attention in human genetics but are rarely reported for plant traits. A major obstacle is that current methodology and software assume a single phenotypic value per genotype, hence requiring genotypic means. An alternative that we propose here is to use mixed models at the individual plant or plot level. Using statistical arguments, simulations, and real data we investigate the feasibility of both approaches and how these affect genomic prediction with the best linear unbiased predictor and genome-wide association studies. Heritability estimates obtained from genotypic means had very large standard errors and were sometimes biologically unrealistic. Mixed models at the individual plant or plot level produced more realistic estimates, and for simulated traits standard errors were up to 13 times smaller. Genomic prediction was also improved by using these mixed models, with up to a 49% increase in accuracy. For genome-wide association studies on simulated traits, the use of individual plant data gave almost no increase in power. The new methodology is applicable to any complex trait where multiple replicates of individual genotypes can be scored. This includes important agronomic crops, as well as bacteria and fungi., (Copyright © 2015 by the Genetics Society of America.)