Search

In this paper, aiming at the spectrum coexistence scenario between non-geostationary satellite orbit (NGSO) and geostationary satellite orbit (GSO) satellite systems, the NGSO network, a secondary system, reuses the spectrum resources of the GSO primary system through spectrum sensing and sharing technology. Combined with the influence of factors such as the radio wave propagation model and channel characteristics of the sensing links, as well as the difference of channel environment between sensing nodes, a weighted cooperative spectrum sensing strategy named optimal fusion decision for time-invariant channel link (OFD-TIC) method was proposed for NGSO–GSO downlink sensing communication. The OFD-TIC method is designed to minimize the global error detection probability while considering the constraints of spectrum conflict probability and false alarm probability. To achieve this, OFD-TIC method transforms the optimization problem into a Lagrange function and utilizes Newton's iterative method to obtain the weights of sensing node and the parameter thresholds for fusion decision. In the six different spectrum sensing scenarios constructed using satellite network data registered by the International Telecommunication Union (ITU), the performance evaluation of the proposed OFD-TIC method is carried out and the simulation results demonstrate that the proposed method outperforms existing typical algorithms. Under the same signal-to-noise ratios (SNR) and sampling number, the OFD-TIC strategy achieves a higher global detection probability than others. Furthermore, the proposed method exhibits fast convergence to 1 of the global detection probability even at low SNR. [ABSTRACT FROM AUTHOR]

We study the interference resulting from transmissions from terrestrial cellular networks on passive satellite receivers. This has important implications for the future allocation and terrestrial use of spectrum on a shared basis with satellite systems, in particular above 100 GHz. We develop an extensive, general model for the interference received at a typical passive satellite. Utilizing a stochastic geometry framework, we precisely characterize the outage probability for a set of satellites – which is the distribution of the interference with respect to spatial and temporal randomness inherent in the aforementioned interference model. We obtain upper and lower bounds on the outage probability using a new analytical method based on a matrix function generalization of the Laplace transform of the interference model. This analytical method allows for the distribution of the interference to be tightly bounded while affording a similar level of tractability to that encountered in the more typical coverage probability analysis of wireless networks using stochastic geometry. Using the analytical characterizations for outage probability, we investigate design choices and constraints such as the antenna gain and positioning at the passive satellite receiver and terrestrial nodes, out-of-band rejection, terrestrial network density, and the scan pattern of the passive receiver. Our analysis indicates that spectrum coexistence is feasible with minimal spectral separation, and that in-band coexistence may even be possible with low, but non-negligible, outage probability. A key insight from our analysis is that outage events are largely driven by spatial events corresponding to the presence of large clusters of transmitters as opposed to temporal fluctuations in interference power. The impact of these spatial events on EESS sensors may be mitigated by varying the boresight direction of the receive beam over the measurement duration.

Efficiently managing coexistence is crucial for achieving high-quality wireless communication in the Industrial, Scientific, and Medical (ISM) band where multiple wireless communication systems operate. Coexistence problems between Wi-Fi and Bluetooth Low Energy (BLE) signals are especially significant due to their shared frequency band, which often leads to interference and a reduced performance for both systems. Therefore, effective coexistence management strategies are essential for ensuring the optimal performance of Wi-Fi and Bluetooth signals in the ISM band. In this paper, the authors conducted a study to investigate coexistence management in the ISM band by evaluating four frequency hopping techniques: random, chaotic, adaptive, and an optimized chaotic technique proposed by the authors. The optimized chaotic technique aimed to minimize interference and ensure zero self-interference among hopping BLE nodes by optimizing the update coefficient. Simulations were conducted in an environment with existing Wi-Fi signal interference and interfering Bluetooth nodes. The authors compared several performance metrics, including the total interference rate, total successful connection rate, and trial execution time for channel selection processing time. The results indicated that the proposed optimized chaotic frequency hopping technique achieved a better balance between reducing interference with Wi-Fi signals, achieving a high success rate for connecting BLE nodes, and requiring minimal trial execution time. This makes it a suitable technique for managing interference in wireless communication systems. While the proposed technique had a higher interference than the adaptive technique for small numbers of BLE nodes, for larger numbers of nodes it had a much lower interference than the adaptive technique. The proposed optimized chaotic frequency hopping technique provides a promising solution for effectively managing coexistence in the ISM band, particularly between Wi-Fi and BLE signals. It has the potential to improve the performance and quality of wireless communication systems. [ABSTRACT FROM AUTHOR]

In this letter, a joint communication beamforming and radar transmit waveform design method is proposed for radar and communication coexistence (RCC) systems. The optimization problem is designed to maximize the radar signal-to-interference-plus-noise ratio (SINR), under the constraints of communication constructive interference (CI), radar waveform similarity and constant modulus. A novel block fading (BF) algorithm is developed for tackling the non-convexity of the problem constructed, where the closed-form sub-optimal solutions are obtained by transforming the original problem into an element-by-element phase angle problem. Finally, the numerical simulation results verify the superiority of the proposed algorithm on the performance of radar detection and multi-user interference (MUI) elimination. [ABSTRACT FROM AUTHOR]

Electronic attack devices can interrupt a radar system by emitting jamming signals. This function typically depends on the support from electronic support measure (ESM) devices, which can capture and identify radar signals in the air. A radar system can avoid being interrupted by confusing adversarial ESM devices. In this article, at the background of colocated multiple-input multiple-output radar, we present an active antijamming method that aims at confusing adversarial ESM devices by masking radar signals with accompanying signals. Masking signals can be transmitted in either the pulsed mode or the periodic continuous-waveform mode. They can be either constant-modulus or with amplitude modulation. The masking signal will cover the radar signal in both time and frequency domains, in order to make adversarial ESM devices find it hard to determine whether an intercepted signal source is a spoofing device or an operating radar. We suppress the impact of masking signals on radar-matched filters, measured by the integrated sidelobe level and peak sidelobe level of their cross-correlation sidelobes, through optimization of masking signals. Masking signals whose chip duration is shorter than that of radar signals are considered for a lower cross-correlation sidelobe level. It is termed as the sequence spread spectrum method, and this method is found critical to obtain good cross-correlation sidelobes, as indicated in numerical results with several kinds of well-designed radar signals. In concerned simulation scenarios, a good masking signal tends to focus its power on frequency bands, where the radar signal power is low. [ABSTRACT FROM AUTHOR]

In this article, we investigate the spectrum-sharing for a space information network comprised of a geostationary orbit (GEO) satellite and a pair of low earth orbit (LEO) satellites, where one spectrum-sensing LEO (SLEO) is used to sense the status of spectrum occupancy of the GEO, and one data-transmission LEO (DLEO) satellite is allowed to access the shared spectrum of the GEO with the aid of the SLEO. In order to improve the throughput of the DLEO satellite, a spectrum sharing framework has been conceived relying on two stages. Differing from the conventional spectrum-sharing scheme, the data-transmission LEO satellite has the ability to access the shared spectrum both in overlay mode and in underlay mode. In overlay mode, the DLEO can perform transmission at any required transmit power. By contrast, in underlay mode, a spectrum-sensing and power allocation aided spectrum-sharing (SPA-SS) scheme is proposed to guarantee that the maximal amount of interference is imposed on the GEO caused by the DLEO. To be specific, in the first stage, the SLEO is invoked for performing spectrum-sensing, where the time intervals of spectrum-sensing have been specifically optimized to alleviate the interference received at the GEO in the second stage. Moreover, an adaptive power allocation is designed to maximal the throughput of the DLEO in the second stage, whilst maintaining the maximal interference imposed on the GEO is lower than the tolerable interference temperature of the GEO. Numerical results show that the proposed SPA-SS scheme outperforms the traditional spectrum-sharing scheme in terms of not only the average throughput, but also of the time-utilization ratio.

With a constant increase in the number of deployed satellites, it is expected that the current fixed spectrum allocation in satellite communications (SATCOM) will migrate towards more dynamic and flexible spectrum sharing rules. This migration is accelerated due to the introduction of new terrestrial services in bands used by satellite services. Therefore, it is important to design dynamic spectrum sharing (DSS) solutions that can maximize spectrum utilization and support coexistence between a high number of satellite and terrestrial networks operating in the same spectrum bands. Several DSS solutions for SATCOM exist, however, they are mainly centralized solutions and might lead to scalability issues with increasing satellite density. This paper describes two distributed DSS techniques for efficient spectrum sharing across multiple satellite systems (geostationary and non-geostationary satellites with earth stations in motion) and terrestrial networks, with a focus on increasing spectrum utilization and minimizing the impact of interference between satellite and terrestrial segments. Two relevant SATCOM use cases have been selected for dynamic spectrum sharing: the opportunistic sharing of satellite and terrestrial systems in (i) downlink Ka-band and (ii) uplink Ka-band. For the two selected use cases, the performance of proposed DSS techniques has been analyzed and compared to static spectrum allocation. Notable performance gains have been obtained.

In the scenario of frequency coexistence between the geostationary (GEO) and non-geostationary (NGEO) satellite networks, the NGEO system should not incur harmful interference to the GEO system according to the policy of the Radio Regulations. Therefore, spectrum sensing as a promising solution is applied widely in this scenario. With the increasing number of NGEO satellites in the space, one NGEO system could be affected by other NGEO systems while sensing the signal from the GEO system. Given these preconditions, the cognitive radio scenario considered in this paper is that: the GEO system is regarded as the primary user, one NGEO system is regarded as the secondary user, and another NGEO system is regarded as the interfering user. Meanwhile, all the satellite systems are supposed to operate with more than one discrete transmit power levels, which is practical and fits the concept of adaptive power control. In our context, we propose a spectrum strategy using hypothesis testing as well as maximum a posteriori to differentiate the GEO signal from the interfering NGEO and noise, and then identify the specific power level utilized by the GEO system. Moreover, we derive the closed-form expressions for threshold of verifying the status of the GEO and for decision regions to determine its power level. Finally, extensive simulations are provided to verify the proposed studies. [ABSTRACT FROM AUTHOR]

The normal operations of radar systems and communication systems under the condition of spectrum coexistence are facing a huge challenge. This paper uses game theory to study power allocation problems between multistatic multiple-input multiple-output (MIMO) radars and downlink communication. In the case of spectrum coexistence, radars, base station (BS) and multi-user (MU) have the working state of receiving and transmitting signals, which can cause unnecessary interferences to different systems. Therefore, when they work together, they should try to suppress mutual interferences. Firstly, the signal from BS is considered as interference when radar detects and tracks targets. A supermodular power allocation game (PAG) model is established and the existence and uniqueness of the Nash equilibrium (NE) in this game are proved. In addition, the power allocation problem from BS to MU is also analyzed, and two Stackelberg PAG models are constructed. It is proved that the NE of each game exists and is unique. Simultaneously, two Stackelberg power allocation iterative algorithms converge to the NEs. Finally, numerical results verify the convergence of the proposed PAG algorithms.

Spectrum awareness techniques have been proposed as a promising solution to improve the utilization of available spectrum bands. However, few works have discussed the feasibility of spectrum awareness techniques in satellite systems. In the scenario of spectrum coexistence between geostationary (GEO) and nongeostationary (NGEO) satellite systems, this paper investigates the issue of blind spot where the spectrum awareness techniques may fail to identify the spectrum holes. Both the uplink and downlink transmissions are analyzed and three key parameters, i.e., altitude of NGEO satellite and antenna diameters of NGEO and GEO earth stations, are considered. Simulation results show that in the uplink, when the NGEO satellite approaches to the GEO satellite with a certain heights, there exists the situation of blind spot. In addition, this paper also provides a specific method to eliminate or reduce the range of blind spot. [ABSTRACT FROM AUTHOR]

Autonomous Wireless Sensors (AWSs) are at the core of every Wireless Sensor Network (WSN). Current AWS technology allows the development of many IoT-based applications, ranging from military to bioengineering and from industry to education. The energy optimization of AWSs depends mainly on: Structural, functional, and application specifications. The holistic design methodology addresses all the factors mentioned above. In this sense, we propose an original solution based on a novel architecture that duplicates the transceivers and also the power source using a hybrid storage system. By identifying the consumption needs of the transceivers, an appropriate methodology for sizing and controlling the power flow for the power source is proposed. The paper emphasizes the fusion between information, communication, and energy consumption of the AWS in terms of spectrum information through a set of transceiver testing scenarios, identifying the main factors that influence the sensor node design and their inter-dependencies. Optimization of the system considers all these factors obtaining an energy efficient AWS, paving the way towards autonomous sensors by adding an energy harvesting element to them.

This paper provides an overview of how our access to the electromagnetic spectrum has evolved and will continue to expand over time. We first focus on the historical origins of technological and regulatory choices, and provide some insight into how these choices have impacted the efficiency with which we currently utilize the spectrum, and how we can better use it in the future. In turn, we summarize the relevant technologies being discussed in today's standardization and research and development efforts. Finally, we provide a vision for the evolution of spectrum access technologies that, intertwined with progressive regulatory and economic policies, will enable flexible and secure sharing of spectrum to deliver seamless mobility with ubiquitous service for users worldwide. [ABSTRACT FROM PUBLISHER]

With a constant increase in the number of deployed satellites, it is expected that the current fixed spectrum allocation in satellite communications (SATCOM) will migrate towards more dynamic and flexible spectrum sharing rules. This migration is accelerated due to the introduction of new terrestrial services in bands used by satellite services. Therefore, it is important to design dynamic spectrum sharing (DSS) solutions that can maximize spectrum utilization and support coexistence between a high number of satellite and terrestrial networks operating in the same spectrum bands. Several DSS solutions for SATCOM exist, however, they are mainly centralized solutions and might lead to scalability issues with increasing satellite density. This paper describes two distributed DSS techniques for efficient spectrum sharing across multiple satellite systems (geostationary and non-geostationary satellites with earth stations in motion) and terrestrial networks, with a focus on increasing spectrum utilization and minimizing the impact of interference between satellite and terrestrial segments. Two relevant SATCOM use cases have been selected for dynamic spectrum sharing: the opportunistic sharing of satellite and terrestrial systems in (i) downlink Ka-band and (ii) uplink Ka-band. For the two selected use cases, the performance of proposed DSS techniques has been analyzed and compared to static spectrum allocation. Notable performance gains have been obtained. [ABSTRACT FROM AUTHOR]

The normal operations of radar systems and communication systems under the condition of spectrum coexistence are facing a huge challenge. This paper uses game theory to study power allocation problems between multistatic multiple-input multiple-output (MIMO) radars and downlink communication. In the case of spectrum coexistence, radars, base station (BS) and multi-user (MU) have the working state of receiving and transmitting signals, which can cause unnecessary interferences to different systems. Therefore, when they work together, they should try to suppress mutual interferences. Firstly, the signal from BS is considered as interference when radar detects and tracks targets. A supermodular power allocation game (PAG) model is established and the existence and uniqueness of the Nash equilibrium (NE) in this game are proved. In addition, the power allocation problem from BS to MU is also analyzed, and two Stackelberg PAG models are constructed. It is proved that the NE of each game exists and is unique. Simultaneously, two Stackelberg power allocation iterative algorithms converge to the NEs. Finally, numerical results verify the convergence of the proposed PAG algorithms. [ABSTRACT FROM AUTHOR]

Autonomous Wireless Sensors (AWSs) are at the core of every Wireless Sensor Network (WSN). Current AWS technology allows the development of many IoT-based applications, ranging from military to bioengineering and from industry to education. The energy optimization of AWSs depends mainly on: Structural, functional, and application specifications. The holistic design methodology addresses all the factors mentioned above. In this sense, we propose an original solution based on a novel architecture that duplicates the transceivers and also the power source using a hybrid storage system. By identifying the consumption needs of the transceivers, an appropriate methodology for sizing and controlling the power flow for the power source is proposed. The paper emphasizes the fusion between information, communication, and energy consumption of the AWS in terms of spectrum information through a set of transceiver testing scenarios, identifying the main factors that influence the sensor node design and their inter-dependencies. Optimization of the system considers all these factors obtaining an energy efficient AWS, paving the way towards autonomous sensors by adding an energy harvesting element to them. [ABSTRACT FROM AUTHOR]